Home | Ezine | Forums | Links | Contact
NitroExpress.com: the .410 Nitro Express

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shopping.NitroExpress.com >> Cartridge Collecting and Swapping

Pages: 1
lancaster
.470 member


Reged: 06/05/08
Posts: 8664
Loc: There's a lighthouse in the mi...
the .410 Nitro Express
      #310409 - 13/01/18 06:39 PM

just stumble about this



was "Nitro Express" only the name of a Remington shotgun cartridge family?
never notice this before

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: the .410 Nitro Express [Re: lancaster]
      #310417 - 14/01/18 03:33 AM

That's an old box. Must be a paper hull.
I had not noticed the "Nitro Express" moniker either.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39059
Loc: Barossa Valley, South Australi...
Re: the .410 Nitro Express [Re: DarylS]
      #310431 - 14/01/18 06:50 AM

Damn, I have had a .410 Nitro Express double rifle since I was TEN. And didn't know it! First gun I used was an old hammer side by side .410 shotgun. Elephants here I come.

Bloody marketing gonzoes. As bad back then as now.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: the .410 Nitro Express [Re: NitroX]
      #310437 - 14/01/18 07:14 AM

Those projectiles are a whole 87.5gns of dynamite!
Would be good for a dingo at close range, or a rather small pig.
The old 410, wonderful pigeon gun!


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: the .410 Nitro Express [Re: 93x64mm]
      #310459 - 14/01/18 11:28 AM

Many of us in BC use .410's, singles or bolts, mostly, for grouse - on the ground or sitting in trees.
I like the 2 1/2" #6's as they pattern well enough to hit flying birds. The 3" are not good in my gun - next to useless as they have too small a killing circle at 25 yards (6") and too large a wounding circle, 3' due to the damaged pellets from too long a shot column.
The the 1/2oz 6's, I get about an 18" killing pattern, which works well for me.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Altamaha
.333 member


Reged: 29/12/08
Posts: 376
Loc: Washington State USA
Re: the .410 Nitro Express [Re: DarylS]
      #310547 - 17/01/18 07:14 AM

I have a bolt action Mossberg .410. Three down in the magazine. My first gun, dad bought it for me in about 1957.

Has an adjustable choke. Long barrel.

With three down does it qualify as a "Proper" DGR?

I recall the "Nitro" shotshells. Might have been 12 ga.


Post Extras: Print Post   Remind Me!   Notify Moderator  
MotelAlpha
.275 member


Reged: 04/02/13
Posts: 61
Loc: Maryland,USA
Re: the .410 Nitro Express [Re: Altamaha]
      #316767 - 24/05/18 11:36 PM

Have any of you chaps seen these? Apparently they were still manufactured up till 1990s. I bought a lot just to see what up. May disassemble, and use the brass in my Biakal SxS 410

https://www.luckygunner.com/410-inch-mk1-indian-musket-98gr-musket-ball-180-rounds

--------------------
Pro Deo et Pro Patria


Post Extras: Print Post   Remind Me!   Notify Moderator  
Wayne59
.400 member


Reged: 20/06/15
Posts: 1219
Loc: Lagrange Ga. USA
Re: the .410 Nitro Express [Re: MotelAlpha]
      #316769 - 25/05/18 01:16 AM

Thanks for the link. I just ordered some. I don't need them but they look neat.

Post Extras: Print Post   Remind Me!   Notify Moderator  
MotelAlpha
.275 member


Reged: 04/02/13
Posts: 61
Loc: Maryland,USA
Re: the .410 Nitro Express [Re: Wayne59]
      #316770 - 25/05/18 02:49 AM

Roger that!, but I want to see if I can trim the case and use them in my 410 SxS, and melt down the round ball for other casting. I am not really to sure how much pressure there is in those with cordite.

--------------------
Pro Deo et Pro Patria


Post Extras: Print Post   Remind Me!   Notify Moderator  
Sarg
.400 member


Reged: 20/01/07
Posts: 1365
Loc: Nil
Re: the .410 Nitro Express [Re: MotelAlpha]
      #316772 - 25/05/18 07:09 AM

Look the same as Lancaster posted yesterday from a different source & would be great to play with, the box is cool too !

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: the .410 Nitro Express [Re: Sarg]
      #316784 - 25/05/18 12:47 PM

"These rounds cannot be used in a standard .410" smooth bore shotgun since the musket ball loaded at the mouth of the case is actually larger than diameter of the case itself. "

The round ball weighs about the same as the .410's loaded with 1/5th ounce slugs here. I seriously doubt they develop any higher pressures than any normal .410 shotshells.

Here, the velocity is toted as being 1,810fps iirc.

I have heard of guys shooting .44 mags. in their .410's.

I would not try that, BTW - grossly undersized in the head.

.444 marlin makes good .410 'brass' for tight patterning 1/2oz shot loads. It would also work for .410" bullets in a rifled choke - almost did that one myself as a test.

Couldn't get my buddy to offer up his .410 SxS for the trial.

.409" pure lead ball weighs 109gr.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
MotelAlpha
.275 member


Reged: 04/02/13
Posts: 61
Loc: Maryland,USA
Re: the .410 Nitro Express [Re: DarylS]
      #316806 - 26/05/18 12:01 AM

Daryl, My bores measure a tad over 409, so I'll chance especially since it a Baikal as usual heavy made little beast

--------------------
Pro Deo et Pro Patria


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: the .410 Nitro Express [Re: MotelAlpha]
      #316814 - 26/05/18 02:55 AM

It was a Baikal I wanted to rifle the right-hand tube on. If successful, I was going to do the left one two. Double paradox .41 3". A 3" WW hull will hold 80gr. 1 1/2F Swiss, a wad and nice RN or SWC .410" cast bullet - roll crimped.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 8664
Loc: There's a lighthouse in the mi...
Re: the .410 Nitro Express [Re: DarylS]
      #316817 - 26/05/18 06:18 AM

anyone knows if its possible to shoot 410 shotshells in such a smooth bore Lee Enfield?

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
MotelAlpha
.275 member


Reged: 04/02/13
Posts: 61
Loc: Maryland,USA
Re: the .410 Nitro Express [Re: lancaster]
      #316823 - 26/05/18 08:51 AM

Sound like a good idea...If you look at the breech thickness, I wonder what else they barrel/chamber these 410 for? Even the thickness just ahead of the chamber where most of the early pressure spike is. Nice guns once they loosen up a bit....The new version MP43 has ejectors as standard.

--------------------
Pro Deo et Pro Patria


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39059
Loc: Barossa Valley, South Australi...
Re: the .410 Nitro Express [Re: lancaster]
      #316835 - 26/05/18 11:48 PM

Quote:

anyone knows if its possible to shoot 410 shotshells in such a smooth bore Lee Enfield?




Yes. The SMLE smooth bore single shots used exactly the normal .410 shotgun shells.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
theprof1
.224 member


Reged: 01/02/19
Posts: 33
Loc: Queensland
Re: the .410 Nitro Express [Re: NitroX]
      #330013 - 11/07/19 06:09 PM

Still working on it but delayed a few years. I have a single bbl .410 3 " chamber, funny a .357 mag round uses with some powders any way, the same charge as the 3 " .410 with it's much heavier shot charge ..... I have a bit of .41 mag pistol barrel threaded to the end of the .410 about 4 inches. Have had some encouraging results using .357 powder charge and 225 gn lead .41 mag slugs - pressure still way under problem levels. With time this will translate to the .410 equivalent of the paradox, heavy for bore projectile at still moderate velocity, my chrono was on loan at the time so no velocity data yet but expecting to get at least 1500 with the 225 gn bullet through the rifled section of the choke with good grouping. Will repost when I get some concrete results and pics.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Yochanan
.375 member


Reged: 26/01/03
Posts: 912
Loc: Volksdiktatur Schweden
Re: the .410 Nitro Express [Re: lancaster]
      #330038 - 12/07/19 05:56 AM

Quote:

just stumble about this



was "Nitro Express" only the name of a Remington shotgun cartridge family?
never notice this before




Says long range on the shell. How versatile

--------------------
© "I have never been able to appreciate 'shock' as applied to killing big game. It seems to me that you cannot kill an elephant weighing six tons by ´shock´unless you advocate the use of a field gun." - W.D.M. Bell: Wanderings of an Elephant Hunter.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 1 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 8411

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved