Home | Ezine | Forums | Links | Contact
NitroExpress.com: Hi, new guy here

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifles

Pages: 1 | 2 | (show all)
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: Hi, new guy here [Re: pamtnman]
      #290433 - 17/11/16 02:43 PM

We had a Sharps 3-1/4" that would not shoot anything but
masking tape wrapped 400gr. PURE lead bullets. Go figure.

I guess what I am saying is straight paper is not the only thing you can patch with.

Mine, however, loved the 580gr. PURE lead conicals, 2-wraps
of .003" bond paper, with it's 18" twist - the longer bullet pictured in the above mould picture.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
aromakr
.375 member


Reged: 20/04/11
Posts: 849
Loc: Hamilton, Montana
Re: Hi, new guy here [Re: pamtnman]
      #290501 - 19/11/16 03:12 AM

Have you tried a Sharps type bullet? Smooth sided with a hollow base. I spent many years shooting original Sharps riles, with bullets designed from original sharps moulds. using pure lead and two wraps of high rag content paper we had excellent results for accuracy, using ffg black with a priming charge of IMR 4759. I don't off hand remember the bullet diameter to bore dia. but using the combination mentioned the bullet upset well, but keep in mind the Sharps barrel's groves were only about .003 deep
Bob


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: Hi, new guy here [Re: aromakr]
      #290506 - 19/11/16 05:09 AM

After patching, the bullets were .451" - thus .438" to .439" prior to patching.
Patched, if pushed through the bore (easily pushed), would show marks from the lands.
Upon firing, they would slug up to fill the rifling.

This technique is covered in Paul Mathews book - "The Paper Jacket".

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
pamtnman
.275 member


Reged: 26/10/16
Posts: 77
Loc: PA USA
Re: Hi, new guy here [Re: DarylS]
      #298830 - 10/04/17 02:49 PM

months later: tons of experimenting, jiggering moulds, getting custom moulds by Leo Bumphrey, etc the gun shoots half-inch groups at 100 yards, 4 inches high. So it is probably dead on at 150 yards. It was made for shooting red deer in NW Scotland, where long shots were usual, so it appears it is dead on after all that time. Thank you for all the advice, guys.

Post Extras: Print Post   Remind Me!   Notify Moderator  
pamtnman
.275 member


Reged: 26/10/16
Posts: 77
Loc: PA USA
Re: Hi, new guy here [Re: aromakr]
      #313670 - 08/03/18 03:11 PM

Quote:

Have you tried a Sharps type bullet? Smooth sided with a hollow base. I spent many years shooting original Sharps riles, with bullets designed from original sharps moulds. using pure lead and two wraps of high rag content paper we had excellent results for accuracy, using ffg black with a priming charge of IMR 4759. I don't off hand remember the bullet diameter to bore dia. but using the combination mentioned the bullet upset well, but keep in mind the Sharps barrel's groves were only about .003 deep
Bob



Thank you for the suggestion. I did try hollow base bullets, and they keyholed. This gun wants plain base, smooth sided paper patch bullets.


Post Extras: Print Post   Remind Me!   Notify Moderator  
bouldersmith
.375 member


Reged: 23/03/06
Posts: 608
Loc: Boulder Colorado
Re: Hi, new guy here [Re: pamtnman]
      #313763 - 10/03/18 04:06 AM

Pamtnman: Well tell us what you did to get it to shoot such tight groups. Inquiring minds want to know.

OahuKaneohe: Looks like that Rigby found the right home. Glad to see you putting it to use.

--------------------
New website http://www.bertramandco.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
pamtnman
.275 member


Reged: 26/10/16
Posts: 77
Loc: PA USA
Re: Hi, new guy here [Re: bouldersmith]
      #314596 - 28/03/18 03:00 PM

Hey Boulder! Did you order the DGJ winter 2017 edition? Also, this next edition, due out any day, has the final recipe in it, although a big chunk of text was misplaced during the editing and it will go in the next DGJ. Basically use a .450" smooth paper patched bullet patched up to .460", the 40% Ross Seyfried formula with 4198.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | (show all)



Extra information
0 registered and 62 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 13325

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved