Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Heavy Bench Gun

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Muzzleloaders & Blackpowder

Pages: 1

cordite
.333 member

Reged: 29/01/07
Posts: 341
Loc: NW Montana

Heavy Bench Gun
#311076 - 26/01/18 10:02 AM

All of my guns are hunting oriented, until this week. Got my first pure target rifle. From the poor Internet pictures I knew it was a heavy barreled target rifle and I was expecting something that weighed 12 pounds or so. Imagine my surprise to unpack this 21 pound monster!

[image]

It has a 36 inch untapered barrel that is 1.5 inches in diameter. Six grooves with a bore diameter of.438 inches. Twist is one turn in 48 inches.

Post Extras:

cordite
.333 member

Reged: 29/01/07
Posts: 341
Loc: NW Montana

Re: Heavy Bench Gun [Re: cordite]
#311077 - 26/01/18 10:13 AM

The gun is totally unmarked. Lyman sights. No half cock notch. Lock and set triggers work perfectly. First step was to disassemble and clean. Only challenge was the old brass alloy nipple which was stuck fast. A bit of gentle heat fixed that and the nipple was replaced. Everything looks good. Someone did a good job putting it together.

[image]

[image]

Sorry about the photos. This image server is turning my photos for some reason.

Post Extras:

cordite
.333 member

Reged: 29/01/07
Posts: 341
Loc: NW Montana

Re: Heavy Bench Gun [Re: cordite]
#311078 - 26/01/18 10:23 AM

Once it passed inspection, I realized I had a .433 Lee round ball mould somewhere. Just about perfect for the .438 bore. So balls were cast and patches cut. I can't get to the shooting range so I shot off a cardboard box on the patio table. Used 70 grains of 2f goex. Two shots at 35 yards. Ok, maybe it was just luck, but the holes touched right at the point of aim! This is going to be fun!

[image]

Edited by cordite (26/01/18 10:30 AM)

Post Extras:

Wayne59
.400 member

Reged: 20/06/15
Posts: 1219
Loc: Lagrange Ga. USA

Re: Heavy Bench Gun [Re: cordite]
#311085 - 26/01/18 01:41 PM

Man. That's a beast.

Post Extras:

tinker
.416 member

Reged: 12/03/05
Posts: 4835
Loc: Nevada

Re: Heavy Bench Gun [Re: Wayne59]
#311088 - 26/01/18 02:01 PM

Nice!

Have fun with it - looks like it should be a hoot!

Cheers
Tinker

--------------------
--Self-Appointed Colonel, DRSS--

"It IS a dangerous game, and so named for a reason, and you can't play from the keyboard. " --Some Old Texan...

Post Extras:

Rothhammer1
.400 member

Reged: 06/01/17
Posts: 1826
Loc: The Redwoods of California

Re: Heavy Bench Gun [Re: cordite]
#311114 - 26/01/18 08:41 PM

Quote:

Imagine my surprise to unpack this 21 pound monster!

You may want something like this (the tripod):

Bog Pod

--------------------
Citizen of the Cherokee Nation

Post Extras:

lancaster
.470 member

Reged: 06/05/08
Posts: 9034
Loc: There's a lighthouse in the mi...

Re: Heavy Bench Gun [Re: Rothhammer1]
#311137 - 27/01/18 04:50 AM

maybe you can drill it out to make a 4 bore

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 27000
Loc: Beautiful British Columbia, Ca...

Re: Heavy Bench Gun [Re: lancaster]
#311139 - 27/01/18 05:05 AM

Very interesting, cordite.

You could contact Dan Pharris - I think in Hamilton, now, not sure.
In the summer, they run a plank shoot in Montana and Wyoming - you've now got the gun for it.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

cordite
.333 member

Reged: 29/01/07
Posts: 341
Loc: NW Montana

Re: Heavy Bench Gun [Re: DarylS]
#311264 - 29/01/18 08:32 AM

I think this barrel has a bit of choke in it. A tightly patched jag goes down smoothly and back out smoothly to about 2 inches from the muzzle then gets tight. Happens every time, definitely seems to be some constriction at the muzzle end.

Post Extras:

Heelerau
.300 member

Reged: 31/01/17
Posts: 105
Loc: Australia

Re: Heavy Bench Gun [Re: cordite]
#311267 - 29/01/18 09:40 AM

According to what I have read in Ned Roberts book, some of those rifles would have had a choked bore, and possibly progressive twist rifling. I am guessing what you have there is a " chunk gun" for shooting off a plank at 60 or more yards. It took me a while to ask what a chunk gun was, a rather unique American match. Dutch Shoultz dry patch method of loading should be ideal for that rifle.

Cheers

Gordon

--------------------
Keep your horse well shod and your powder dry !

Post Extras:

Pages: 1

Extra information

0 registered and 9 anonymous users are browsing this forum.

Moderator: DarylS

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2811

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact