Home | Ezine | Forums | Links | Contact
NitroExpress.com: 500 Jeffery - Please Help Identify Unknown Maker

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Pages: 1
buckstix
.400 member


Reged: 07/11/12
Posts: 1091
Loc: Whitetail Country
500 Jeffery - Please Help Identify Unknown Maker
      #309720 - 31/12/17 10:54 PM

500 Jeffery - Please Help Identify Unknown Maker

Hello All,

I've posted this here from another site in hopes that just maybe, someone can help to identify the maker of this 500 Jeffery rifle.

The rifle was built on a Military 1928 BRNO VZ24 action, as evidenced by the Military Proofs / Markings and the 1928 Military Acceptance Stamp.

Specs of the rifle are as follows - holds 2 down-1 up, - 26" barrel. - 9 lbs 1 oz, - 14-5/8" LOP, over a 1" LimbSaver pad. (the LimbSaver recoil pad may be a more recent addition based on the remnant of a "Widows-Peak" black spacer) The barrel has a 3 leaf Rear Site and an interesting Ramped Front Site with a small bead, and a "Flip-Up" Ivory Moon Bead.

Although the rifle has a very "German" look to it with its "Butter-Knife" bolt handle and its "side-panel" stock, I'm thinking it was built in the U.S. because the caliber marking is the English caliber designation "500 Jeffery". The stock wood has a very coarse distinctive grain, but its not a laminate. The bottom of the barrel, just ahead of the action, is stamped "BITER" with the stamping "12.4.1998" below it, which I'm assuming is the build date, December 4, 1998.

If anyone has suggestions, or comments as to how I might determine the maker, please feel free to respond.





























After the original pictures above were posted, I relieved the tang, and matched the stock wood to the thumb-slot on the action. I also inspected the Mercury Reducer in the stock and while I had the recoil pad removed, I drilled another hole and added a 3/4 pound Tungsten Bar to better balance the rifle. This addition brings the rifle's weight up to 9 lbs 13 oz. (up from its original weight of 9 lbs 1 oz) When fully loaded the weight is 10 lbs 3 oz. The increase in weight reduces the rifle's recoil by over 10%. The added weight balances the rifle's heavy 26" barrel. It was somewhat muzzle heavy, but now balances exactly on the center of the action, making it more comfortable to carry.


.

But, the one question that still begs to be answered ... is ... Who / What is BITER?

.
.


--------------------
"You never pay too much for something, you only buy it too early."


Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 8664
Loc: There's a lighthouse in the mi...
Re: 500 Jeffery - Please Help Identify Unknown Maker [Re: buckstix]
      #309721 - 01/01/18 12:37 AM

cant help but it looks also american made to me

seems to be a good solid rifle

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
kuduae
.400 member


Reged: 13/01/10
Posts: 1756
Loc: middle of Germany
Re: 500 Jeffery - Please Help Identify Unknown Maker [Re: lancaster]
      #309736 - 01/01/18 06:00 AM

As there are no official, civilian proofmarks (at least you don't mention them), the rifles was certainly put together in America. The custom hardware was availble in the USA. Bought such a "Williams Streamlined" front sight ramp and "Whitworth Express rear sight with base" myself from Brownells in the 1990s. The custom bolt handle blank was also offered by them as "Meier Butterknife Bolt Handle #1207".


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: 500 Jeffery - Please Help Identify Unknown Maker [Re: kuduae]
      #309746 - 01/01/18 07:46 AM

At just over 9lbs it would have been a 'biter' Buckstix!
Good job adding that extra weigh & hence better balance.
Might have to watch that bolt handle too as it may give you a good smack on your hand upon firing.
As a further note an extra recoil bolt behind the rear of the magazine may help reduce the chance of a stock splitting from this heavy hitter!
Another great work horse for the collection mate, I think a lot including myself would like to see your loads on this one.
All the best for 2018
93x64mm


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rule303
.416 member


Reged: 05/07/09
Posts: 4896
Loc: Woodford Qld
Re: 500 Jeffery - Please Help Identify Unknown Maker [Re: buckstix]
      #309751 - 01/01/18 08:40 AM

Nice looking rifle and the additions you made buckstix look good and are practical.

Certainly put together in the US going by the way the date is laid out, Month/Day/Year.


Post Extras: Print Post   Remind Me!   Notify Moderator  
buckstix
.400 member


Reged: 07/11/12
Posts: 1091
Loc: Whitetail Country
Re: 500 Jeffery - Please Help Identify Unknown Maker [Re: 93x64mm]
      #309763 - 01/01/18 01:18 PM

Quote:

At just over 9lbs it would have been a 'biter' Buckstix!
Good job adding that extra weigh & hence better balance.
93x64mm



Hello 93x64mm,

Thanks for the reply.

I tested the rifle today with some reduced loads. Only fired 8 rounds because it was only 3 degrees today. When the weather warms up I'll shoot a little more.



Quote:

Nice looking rifle and the additions you made buckstix look good and are practical.

Certainly put together in the US going by the way the date is laid out, Month/Day/Year.



Hello Rule303,

Thanks for the reply.

The date layout really isn't really a clue. German date would be Day/Month/Year ... so it would be the 12th of April, 1998.

--------------------
"You never pay too much for something, you only buy it too early."


Post Extras: Print Post   Remind Me!   Notify Moderator  
Wayne59
.400 member


Reged: 20/06/15
Posts: 1219
Loc: Lagrange Ga. USA
Re: 500 Jeffery - Please Help Identify Unknown Maker [Re: buckstix]
      #309765 - 01/01/18 01:25 PM

I didn't know that you could put a 500 Jefferys in a standard length action. Learn something new every day.

Post Extras: Print Post   Remind Me!   Notify Moderator  
grandveneur
.400 member


Reged: 21/09/08
Posts: 1278
Loc: France / Germany
Re: 500 Jeffery - Please Help Identify Unknown Maker [Re: Wayne59]
      #309778 - 01/01/18 10:21 PM

http://forums.nitroexpress.com/showflat....amp;Search=true

Schüler used only standard action for his rifles 12,7x70 with a vertical magazine and spring clips on the side to hold the cartridges. It was a compromise just like for the cartridge 11,2x72. Only the cartridge 10,75x68 was a perfect cartridge for a standard Mauser action , a poor ballistic but a good compromise.

It's better to use a magnum action , but the problem of the rebated rim of all this cartridges , except the 10,75x68 , remains.

Edited by grandveneur (01/01/18 10:31 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rule303
.416 member


Reged: 05/07/09
Posts: 4896
Loc: Woodford Qld
Re: 500 Jeffery - Please Help Identify Unknown Maker [Re: buckstix]
      #309801 - 02/01/18 08:14 AM

G'day Buckstix, I think the US is about the only country that dates month,day,year. Not sure about your Northern neighbours.

Post Extras: Print Post   Remind Me!   Notify Moderator  
buckstix
.400 member


Reged: 07/11/12
Posts: 1091
Loc: Whitetail Country
Re: 500 Jeffery - Please Help Identify Unknown Maker [Re: Rule303]
      #309837 - 03/01/18 12:25 AM

Hello Rule303

Thanks for the reply.

Yes, Canada also uses Day, Month, Year.

--------------------
"You never pay too much for something, you only buy it too early."


Post Extras: Print Post   Remind Me!   Notify Moderator  
buckstix
.400 member


Reged: 07/11/12
Posts: 1091
Loc: Whitetail Country
Re: 500 Jeffery - Please Help Identify Unknown Maker [Re: buckstix]
      #310024 - 06/01/18 02:39 AM

[QUOTE]Originally posted by buckstix:
[/QUOTE]

.
.


After another week of daily searches on the internet for a gunsmith named "BITER", I finally found a clue. This ad appeared "one time" in the June 1994 issue of Field & Stream Magazine. I've been following-up with phone calls, and hope to get more information later this evening.



--------------------
"You never pay too much for something, you only buy it too early."


Post Extras: Print Post   Remind Me!   Notify Moderator  
buckstix
.400 member


Reged: 07/11/12
Posts: 1091
Loc: Whitetail Country
Re: 500 Jeffery - Please Help Identify Unknown Maker [Re: buckstix]
      #310025 - 06/01/18 02:40 AM

Quote:

Originally posted by buckstix:





.
.


After another week of daily searches on the internet for a gunsmith named "BITER", I finally found a clue. This ad appeared "one time" in the June 1994 issue of Field & Stream Magazine. I've been following-up with phone calls, and hope to get more information later this evening.



--------------------
"You never pay too much for something, you only buy it too early."


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 14 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2752

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved