Home | Ezine | Forums | Links | Contact
NitroExpress.com: Robert Hughes and Sons Makers London

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifle Photos & Archive

Pages: 1
Longknife
.333 member


Reged: 17/04/08
Posts: 256
Loc: Illinois
Robert Hughes and Sons Makers London
      #300631 - 22/05/17 02:08 AM

Here are some pictures of my Robert Hughes SXS 500 EX (3 inch) rifle. It has Henry rifling, the barrels are 26 inches long and it weighs a trim 9 lb. and 4 oz. I was amazed at how slim and trim and balanced it feels in my hands. Those English makers sure knew their stuff! Here is what I have found out about Hughes, and if this info is correct, that makes this gun a very LATE period BPE rifle made after 1897. If anyone has any other info on Hughes or pictures of his rifles (or other products) I would appreciate it if you could share it with me, just PM me with the info. THANK YOU, ED




UNIVERSAL FIRE ARMS WORKS / ROBERT HUGHES / BIRM. Robert Hughes was a successful Birmingham gun & rifle maker who operated at 22 Moland Street from 1855-1870 and who moved to 100 Moland Street in 1870, operating there as Ammunition, Barrel, Furniture & Implement maker until 1905, with the company becoming Robert Hughes & Sons in 1897.

[image]http://[/image]
[image]http://[/image]

[image]http://[/image]

[image]http://[/image]

[image]http://[/image]

[image]http://[/image]

[image]http://[/image]

Edited by Longknife (22/05/17 02:19 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Maxim
.224 member


Reged: 04/06/16
Posts: 42
Loc: Michigan USA
Re: Robert Hughes and Sons Makers London [Re: Longknife]
      #300633 - 22/05/17 02:24 AM

Bluing and casehardening are still pristine. Steel flat buttplate must get your attention. Closed knot at the toe of the stock, perhaps it showed up while the stock was being carved and they felt just leave it.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3518
Loc: Colorado
Re: Robert Hughes and Sons Makers London [Re: Maxim]
      #300640 - 22/05/17 05:43 AM

Hughes had quite an offering in their day.
I have a Farquharson from Robert Hughes & Son and was just looking at a Martini 303 from Hughes yesterday.
I have seen that .500 double before. Probably 20yrs ago at the Colorado collectors show. Could be one very similar. We called it he "Werewolves of London" gun because the lioness on the left lock.

--------------------
He who lives in the past is doomed to enjoy it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: Robert Hughes and Sons Makers London [Re: Huvius]
      #300644 - 22/05/17 07:20 AM

Lovely piece Longknife!
What is the load you feed this sweet old lady to make her 'sing'?


Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3475
Loc: Darwin, Top End of Australia
Re: Robert Hughes and Sons Makers London [Re: 93x64mm]
      #300648 - 22/05/17 08:30 AM

Very nice example, Longknife, you will no doubt enjoy your custody very much!

The British BP .500s are perhaps the epitome of slender elegance vs hitting power: many are described as 'serpentine' whereas a step up to the .577s usually takes us well beyond that paradigm!

Please don't flame me for this observation, but if it is to be taken afield those rear sight-Vs should probably be widened, ...a lot!
Almost looks like they were never filed-in.

Hard decision to take a file to a rifle that has remained virtually untouched for more than a century though.....
(unless the rear sight is a replacement, although it does look original)

If its to be a collector or range-rifle just forget I said anything!

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au


Post Extras: Print Post   Remind Me!   Notify Moderator  
Longknife
.333 member


Reged: 17/04/08
Posts: 256
Loc: Illinois
Re: Robert Hughes and Sons Makers London [Re: Marrakai]
      #300674 - 22/05/17 10:44 PM

Maxim, That finish IS remarkable, I guess that knot is not going to cause any problems, been there for 100 years,,,,

Huvius, YOU just named my rifle!!!,,,, "WEREWOLF OF LONDON" She DOES look like a Werewolf! Might it have been built for a special purpose??? That explains its good condition doesn't it!!! Maybe I should cast up some silver bullets!

93x64mm,, There is a lengthy discussion about loads for this beauty here. I have not shot it YET!

http://forums.nitroexpress.com/showflat.php?Cat=0&Number=296065&an=0&page=0#Post296065

Marrakai, The V's seem to be wide enough to me but probably need to be wider to be real "express" sights. One problem (for my ageing eyes) is that the sight is Sooooo close to the breech, about 3 3/4 inches. I can see it better with my reading glasses on! I'll see how it shoots before making any "adjustments". I do plan to take it Boar hunting in one of the southern States...ED

--------------------
Longknife

Edited by Longknife (22/05/17 11:06 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 11 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4479

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved