Home | Ezine | Forums | Links | Contact
NitroExpress.com: Mauser take down rifles barrel threading

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1
dosenroller
.224 member


Reged: 15/01/17
Posts: 4
Loc: PA
Mauser take down rifles barrel threading
      #294802 - 05/02/17 09:00 PM

Hello,

I always admiring Mauser take down rifles. Most often the barrel is simply threaded into the receiver and after operating a latch you can unthread the barrel. A lot of of those seem to utilize the standard Mauser barrel threading. I talked to a gunmaker years ago and he claimed that having the original threads has the disadvantage that the first shot after reassemble of the rifle will be off a few inches due to the fact that the barrel has to seat itself into the threading. He recommended a tapered fitting between the barrel and the receiver to eliminate that problem. I also seen pictures of Hartmann and Weiss take down rifles and they have a threaded connection. It seems though that the thread they using is different, more square than triangular.

Does anybody has experience with this and can give me more information?

Thank you very much


Post Extras: Print Post   Remind Me!   Notify Moderator  
Waidmannsheil
.400 member


Reged: 19/04/13
Posts: 2363
Loc: Melbourne Australia
Re: Mauser take down rifles barrel threading [Re: dosenroller]
      #294826 - 06/02/17 06:04 AM

The tapered fitting your gunsmith is talking about is the same system that is employed by the Cam-Lock system used to mount lathe chucks onto the lathe spindle. It works very well but requires super precise fitting. The threads often used are either ACME (29 degrees included angle) or Trapezoidal (30 degrees included angle). These types of threads have greater root thickness and the steeper thread angle provides less splaying of the thread under load. They are often chosen where a segmented thread is used. The German gunmaker Theo Jung uses this system.

http://www.waffenjung.de/?take-down,60

Waidmannsheil.

--------------------
There is nothing wrong with vegetarian food, so long as there is meat with it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
justcurious
.333 member


Reged: 17/03/10
Posts: 285
Loc: Germany
Re: Mauser take down rifles barrel threading [Re: Waidmannsheil]
      #294856 - 06/02/17 09:44 PM

https://en.wikipedia.org/wiki/Trapezoidal_thread_forms
IIRC that is the type of threading used by H&W.


Post Extras: Print Post   Remind Me!   Notify Moderator  
dosenroller
.224 member


Reged: 15/01/17
Posts: 4
Loc: PA
Re: Mauser take down rifles barrel threading [Re: justcurious]
      #294857 - 06/02/17 09:48 PM

Thank you for the replies, this is exactly what I was looking for. Jung makes outstanding rifles, I like his work. Interestingly he was using the "slip fit" method for the longest time and now he machines in the split thread.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Waidmannsheil
.400 member


Reged: 19/04/13
Posts: 2363
Loc: Melbourne Australia
Re: Mauser take down rifles barrel threading [Re: dosenroller]
      #294937 - 08/02/17 09:22 PM

Quite agree, I also really like their rifles and they certainly do some very good machining.

Waidmannsheil.

--------------------
There is nothing wrong with vegetarian food, so long as there is meat with it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 38 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2033

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved