Home | Ezine | Forums | Links | Contact
NitroExpress.com: Mauser m96

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1
Joshua
.300 member


Reged: 01/03/16
Posts: 248
Loc: north carolina, usa
Mauser m96
      #294457 - 30/01/17 02:10 AM

I know most rifles talked about are the m98, but gunsinternational.com has 2 barreled actions under gun parts in the menu for 100.00 a piece. Will post link if wanted

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: Mauser m96 [Re: Joshua]
      #294465 - 30/01/17 07:41 AM

If the actions are in decent to great shape, they are worth it in my opinion. I would do this with any 96 action from 1912 onward.

Lots can be done to the M96 action. It is a 57,000psi action to start, with standard .470" rim diameter & case size. It was chambered.

Just for a lark, I once rechambered a model 1935 M96 action for the 6.5x68S round.
I didn't run full powered loads, but did push 129gr. Hornadys at 3,200fps.

My factory m96 military 29" bl. helped a bit in obtaining that velocity with 5gr. less H870 than my buddy was using in his 24" bl. His rifle beat my rifle by 100fps only.

Due to it's action length, it would eject only fired cases. The bolt had to be pulled 'slightly' to extract unfired rounds.

If the factory barrels are in good shape, a 6.5x55 Arch or AI would make an impressive long range deer rifle, capable of taking elk and moose as well. Of course at closer ranges, the standard 6.5x55 will do that anyway.

Other chamberings than the 6.5x55's (55,000psi round) in these rifles included 7x58, 8x57 and 9.3x62, all 57,000PSI rounds.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Joshua
.300 member


Reged: 01/03/16
Posts: 248
Loc: north carolina, usa
Re: Mauser m96 [Re: DarylS]
      #294473 - 30/01/17 10:15 AM

Very true Daryl. I think I may have to try to get one just to have for a future project lol

Post Extras: Print Post   Remind Me!   Notify Moderator  
pjaln
.375 member


Reged: 08/06/06
Posts: 708
Loc: massachusetts ,U.S.A.
Re: Mauser m96 [Re: Joshua]
      #294484 - 30/01/17 01:54 PM

joshua,,take a look around this site for what joel dorleac did with one ,,it is one of the best rifles ive ever seen ....paul

Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39063
Loc: Barossa Valley, South Australi...
Re: Mauser m96 [Re: pjaln]
      #294494 - 30/01/17 05:42 PM

The M96 also cocks on closing.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
xausa
.400 member


Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
Re: Mauser m96 [Re: NitroX]
      #294504 - 30/01/17 11:11 PM

Quote:

The M96 also cocks on closing.




That can be corrected with the Dayton Traister #DSL93 trigger kit. http://www.daytraco.com/


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: Mauser m96 [Re: xausa]
      #294520 - 31/01/17 05:08 AM

The cock on closing feature has never bothered me, but some guys do prefer to go through the fairly minor machine work of installing the kit and modifying the bot.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Louis
.375 member


Reged: 13/05/15
Posts: 977
Loc: France
Re: Mauser m96 [Re: DarylS]
      #294524 - 31/01/17 06:43 AM

I managed to acquire in late 2015 a Mauser 96 manufactured for Sweden at Oberndorf-Am-Neckar; this military rifle in 6,5x55 was part of the first batch of 40,000 rifles produced in Germany before production was transferred to Sweden. The action, in pristine condition, is marked "Waffen Fabrik Mauser Oberndorf A/N 1899" on the front; to the contrary the bore is in poor shape and the barrel will have to be removed. The plan is to have the action used for building in 2017 a classic light mountain stutzen rifle, most probably in 6,5x55 , 6,5x57 or 7x57. More pictures to follow, but probably not before 2018 as this project will be a long shot!
Louis

--------------------
"Everything that doesn't kill me makes me stronger"


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: Mauser m96 [Re: Louis]
      #294527 - 31/01/17 07:11 AM

Quote:

I managed to acquire in late 2015 a Mauser 96 manufactured for Sweden at Oberndorf-Am-Neckar; this military rifle in 6,5x55 was part of the first batch of 40,000 rifles produced in Germany before production was transferred to Sweden. The action, in pristine condition, is marked "Waffen Fabrik Mauser Oberndorf A/N 1899" on the front; to the contrary the bore is in poor shape and the barrel will have to be removed. The plan is to have the action used for building in 2017 a classic light mountain stutzen rifle, most probably in 6,5x55 , 6,5x57 or 7x57. More pictures to follow, but probably not before 2018 as this project will be a long shot!
Louis




Sounds a rather nice little project mate!
Difficult choice to make as to the calibre!!!!
Keep up the good work & some pictures if you can
I do like the '96's



Post Extras: Print Post   Remind Me!   Notify Moderator  
Joshua
.300 member


Reged: 01/03/16
Posts: 248
Loc: north carolina, usa
Re: Mauser m96 [Re: 93x64mm]
      #294534 - 31/01/17 08:48 AM

That does sound like a very interesting project you have. As for the cock on closing, it has never really bothered me. I would love to have one of those in the above mentioned 6.5x57, along with the standard swede. When I came across them, I wanted to make sure to let the members here know

Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39063
Loc: Barossa Valley, South Australi...
Re: Mauser m96 [Re: xausa]
      #294548 - 31/01/17 07:44 PM

Quote:

Quote:

The M96 also cocks on closing.




That can be corrected with the Dayton Traister #DSL93 trigger kit. http://www.daytraco.com/




It doesn't bother me either but is a feature of the M96 in original form.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39063
Loc: Barossa Valley, South Australi...
Re: Mauser m96 [Re: Louis]
      #294549 - 31/01/17 07:48 PM

Quote:

I managed to acquire in late 2015 a Mauser 96 manufactured for Sweden at Oberndorf-Am-Neckar; this military rifle in 6,5x55 was part of the first batch of 40,000 rifles produced in Germany before production was transferred to Sweden. The action, in pristine condition, is marked "Waffen Fabrik Mauser Oberndorf A/N 1899" on the front; to the contrary the bore is in poor shape and the barrel will have to be removed. The plan is to have the action used for building in 2017 a classic light mountain stutzen rifle, most probably in 6,5x55 , 6,5x57 or 7x57. More pictures to follow, but probably not before 2018 as this project will be a long shot!
Louis




Cool project.

I have an ex-mil M96 wearing some plastic stock and cut off military barrel. Nothing special but very accurate. Primarily as a loaner rifle for any guests.

I also have a walnit partly finished stock for it, moght even be cherry wood, I forget (?). A stutzen would be a cool idea. However for me, I would hang out for an original M-S stutzen if I ever source one.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
HistoricBore
.300 member


Reged: 28/09/11
Posts: 224
Loc: United Kingdom
Re: Mauser m96 [Re: NitroX]
      #294562 - 01/02/17 04:06 AM

I have one (a 1939 M-Sch 6.5) here in England, and it is lovely.... Must shoot it more.

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: Mauser m96 [Re: HistoricBore]
      #294566 - 01/02/17 04:22 AM

Note that removing these barrels can result in twisted actions, especially on the really old rifles.

Cutting a relief groove in front of the action to relieve hoop stress of the barrel against the action face, can help, eliminating any action damage.

We had a local gun smith, years ago, who used to slip a 2" x 3/8" late of steel up through the mag well, then torque on that with a long bar. He turned a bunch of these nice little actions into pretzels.

I used a standard action wrench with the relief cut in front and the actions twisted off easily with just a small bump on the wrench handle.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Louis
.375 member


Reged: 13/05/15
Posts: 977
Loc: France
Re: Mauser m96 [Re: DarylS]
      #294579 - 01/02/17 06:30 AM

Daryl, thank you for the reminder. The project I mentioned above - which will involve removing the old barrel, will be conducted by a Master Riflesmith; I am therefore fully confident about the outcome. I would love being able to achieve this by myself, as so many Forum members do, but my technical skills are unfortunately limited to rifle maintenance only! Louis

--------------------
"Everything that doesn't kill me makes me stronger"


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: Mauser m96 [Re: Louis]
      #294585 - 01/02/17 09:57 AM

No Problemo - good luck Louis.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Wanabebwana
.300 member


Reged: 11/01/13
Posts: 221
Loc: Canada
Re: Mauser m96 [Re: DarylS]
      #294588 - 01/02/17 10:54 AM

If you are going to build a rifle from scratch you should consider what the total cost in time and money will be and if you still want to proceed what it will be worth when you finish. A 96 action with modifications to have it cock on opening will be very close in cost to a 98 action. There is a reason why top rifle makers all over the planet use the Mauser 98 exclusively. I have yet to see a $40 000 H&H built on a M94-96 action.
If the rifle is to be thrown in the back of a pickup truck, used as a walking stick or a paddle then any action will do.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 56 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4318

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved