Home | Ezine | Forums | Links | Contact
NitroExpress.com: M-S 1930 System?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Pages: 1
Hemihead
.275 member


Reged: 21/12/12
Posts: 54
Loc: N.Y. USA
M-S 1930 System?
      #292382 - 21/12/16 02:53 PM

Can anyone possibly know the maker or engraver on this 6.5x54?The engravers name or initials are to the right of the Elk's right leg on the floorplate..Any help appreciated.Just found out the engraver was Albin Obiltschnig of Ferlach. [image][/image] [image][/image] [image][/image] [image][/image] [image][/image]

Edited by Hemihead (22/12/16 08:45 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Hemihead
.275 member


Reged: 21/12/12
Posts: 54
Loc: N.Y. USA
Re: M-S 1930 System? [Re: Hemihead]
      #292487 - 24/12/16 08:45 AM

Does the 1253.49 mean the rifle was built by either Austrian gunmaker Franz Schmid or maker Franz Schmeid?

Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 464
Loc: Perpignan, France
Re: M-S 1930 System? [Re: Hemihead]
      #292514 - 24/12/16 07:20 PM


Perhaps one of the numerous rifles made for the post-war occupant.
Seems to have been completed October 1939, then embellished and finally proofed in 1949.

DORLEAC
www.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
Hemihead
.275 member


Reged: 21/12/12
Posts: 54
Loc: N.Y. USA
Re: M-S 1930 System? [Re: Hemihead]
      #292525 - 25/12/16 02:46 AM

Thanks Dorleac.I might have thought ".49" was Franz Schmid.Would there be a maker's mark anywhere? http://www.hallowellco.com/Ferlach%20gunmakers_code_numbers.htm

Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 464
Loc: Perpignan, France
Re: M-S 1930 System? [Re: Hemihead]
      #292528 - 25/12/16 05:06 AM


Most of these rifles were customized for some "boss" of the occupant force.
Albin was a top notch engraver of Ferlach but the time was difficult and any work was good to take.
Until 1945 the marking 49.xxxx (followed by serial number) was the proof house code for Franz Schmeid, after 1945 it becomes the code for Franz Schmid. Notice that the code is before the SN, not after.
1253.49 above proof marks indicates that's the 1253 rifle proofed in 1949.
All this must be confirmed by a close examination of the different markings.

DORLEAC
www.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
Hemihead
.275 member


Reged: 21/12/12
Posts: 54
Loc: N.Y. USA
Re: M-S 1930 System? [Re: DORLEAC]
      #292533 - 25/12/16 05:38 AM

The engraver's name is to the right of the stag's forleg if you magnify it.Do you think it was Albin or his son Han's that engraved the rifle?I thought it might have been Schmeid's work because I found this drilling that has a similar buttstock. http://www.gunauction.com/buy/13910066

Edited by Hemihead (25/12/16 05:40 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 464
Loc: Perpignan, France
Re: M-S 1930 System? [Re: Hemihead]
      #292542 - 25/12/16 08:22 AM

Appears to be the work of the late Albin and the stock bears no more than a traditional and comon Austrian cheekpiece.

DORLEAC
www.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
Hemihead
.275 member


Reged: 21/12/12
Posts: 54
Loc: N.Y. USA
Re: M-S 1930 System? [Re: DORLEAC]
      #292545 - 25/12/16 09:27 AM

Thanks for your expertise Dorleac.I'll know more when I get my hand's on it.I now know who engraved it,but it would be nice to know who the gunmaker was.Happy Holiday's,Ed

Post Extras: Print Post   Remind Me!   Notify Moderator  
Hemihead
.275 member


Reged: 21/12/12
Posts: 54
Loc: N.Y. USA
Re: M-S 1930 System? [Re: Hemihead]
      #294642 - 02/02/17 08:14 AM

Rifle was made by Josef Mischitz.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 38 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2277

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved