Home | Ezine | Forums | Links | Contact
NitroExpress.com: Falling block double prototype

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

Pages: 1 | 2 | 3 | (show all)
CHAPUISARMES
.416 member


Reged: 16/01/08
Posts: 2908
Loc: DUBBO, NSW, AUSTRALIA
Re: Falling block double prototype [Re: baileybradshaw]
      #173468 - 20/12/10 04:19 PM

Well done... almost complete, when will they be marketed ??

Cheers,

Jeff Gray

.


Post Extras: Print Post   Remind Me!   Notify Moderator  
baileybradshaw
.333 member


Reged: 21/06/08
Posts: 305
Loc: Diana, TX
Re: Falling block double prototype [Re: CHAPUISARMES]
      #173470 - 20/12/10 05:38 PM

Quote:

Well done... almost complete, when will they be marketed ??

Cheers,

Jeff Gray

.





I'm taking orders and ordering materials for the first run.

--------------------
www.bradshawgunandrifle.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
baileybradshaw
.333 member


Reged: 21/06/08
Posts: 305
Loc: Diana, TX
Re: Falling block double prototype [Re: baileybradshaw]
      #174274 - 28/01/11 01:48 AM

Glad NE forums has returned. Good on you John for all the work it must have taken.


Here's a few pictures of the rifle polished up in the white at the Dallas Safari Club show. It was well received and I took several orders. Had a great show.







--------------------
www.bradshawgunandrifle.com

Edited by CptCurl (28/01/11 09:55 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
AkMike
.416 member


Reged: 19/11/05
Posts: 2576
Loc: Anchorage, Alaska
Re: Falling block double prototype [Re: baileybradshaw]
      #174284 - 28/01/11 05:54 AM

Very Cool Bailey!
I hope you're still healing up well!

--------------------
"When you see that in order to produce, you need to obtain permission from men who produce nothing; when you see that money is flowing to those who deal not in goods, but in favors; you may know that your society is doomed." Ayn Rand


Post Extras: Print Post   Remind Me!   Notify Moderator  
Anonymous
Unregistered




Re: Falling block double prototype [Re: sirrocco]
      #174463 - 31/01/11 12:37 AM

Please do post pictures once you get the gun finished.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Ron_Vella
.333 member


Reged: 29/04/05
Posts: 432
Loc: Oshawa, Ontario, Canada
Re: Falling block double prototype [Re: ]
      #174663 - 02/02/11 06:32 AM

Bailey,
Welcome back, hope the hips are healing up well without too much discomfort. Also nice to have our favourite web site back up and running. Thanks again for the work on the quarter rib. I finnished fitting it about a week ago, finished the rust bluing last night, and installed it this morning. Attached are two photos of the rib, mounted on my 12-bore double rifle, with and without the scope mounted. Now I can use my first-born again with my poor old eyes.

Best,
Ron



Edited by CptCurl (04/02/11 09:53 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
baileybradshaw
.333 member


Reged: 21/06/08
Posts: 305
Loc: Diana, TX
Re: Falling block double prototype [Re: Ron_Vella]
      #174669 - 02/02/11 07:31 AM

Hey Ron,

Hips are doing incredibly well. I motored out to put blankets on my two horses this morning. I attribute a lot of it to my surgeon. There is a reason he has a three to four month wait list while doing 3 to 4 hips or knees a day.

The rib looks great. Is it soldered on or did you use screws? Glad it worked out.

--------------------
www.bradshawgunandrifle.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ron_Vella
.333 member


Reged: 29/04/05
Posts: 432
Loc: Oshawa, Ontario, Canada
Re: Falling block double prototype [Re: baileybradshaw]
      #174685 - 02/02/11 11:18 AM

Glad to hear that things are going well for you Bail. I didn't solder because then I would have had to do a complete refinish. It's held down with one 8-40 and four 6-48 screws, all into good solid steel. It isn't going to move in an earthquake!!

Post Extras: Print Post   Remind Me!   Notify Moderator  
Jager
.224 member


Reged: 10/01/12
Posts: 19
Loc: New South Wales Australia
Re: Falling block double prototype [Re: Ron_Vella]
      #290260 - 13/11/16 08:37 PM

Man l want one soooo bad .

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | 3 | (show all)



Extra information
0 registered and 9 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 14096

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved