Quote:

---

The most used action remains the Mauser 98 or 96 type for Stalking Rifles. Even if we have in stock some beautiful commercial Original Oberndorf Mauser systems, single or double square bridge, solid wall, “Intermediate” or “Kurz”, we don’t consider those to be superior to the productions of Deutsche Waffen und Munitionsfabriken. Generally, the systems made by DWM for Brazilian 1908, Argentinian 1909 and the Mauser “Standard Modell” made in Oberndorf are of exceptional quality.

The use of forged Swedish steel (AISI 1330 type) with proper thermal treatment of these military “luxury” versions could only be amortized through large series made in arsenal. Similarly, models 24 made by Ceska Zbojovka CZ and especially G33/40 are exceptionally good, as well as, in a lesser measure, the Polish Model 29.

We reserve the superb Gewher actions, made in Erfurt or Amberg before WWI to intermediate calibers and we do not hesitate, although they require extensive file modeling and finish work, to use the very hard and strong Byf.42/43 military productions, which, with the latter FN, remain our favorites for “hard” or “violent” calibers.

The Swedish 96 is by itself a superb foundation for intermediate calibers such as 6.5×57, 7×57 or .284 Winchester.
For special executions, and for all our left-handed rifles, we use the superb FZH (Feinmechanische Zerspanungs) systems that are made with the same steel as the old Oberndorf ones.

However, the selected mechanism remains a starting basis that has to be carefully blue printed, squared, adjusted and polished. To do this, after the first file shaping, the receiver is carefully checked to make sure an hazardous barrel take apart hasn’t warped it, then it is set on a special jig, surfaces are rectified and squared, threading is cleaned and the bolt lug squared and lapped. Now the base is sound and can receive the barrel.

---

Post Extras: