Home | Ezine | Forums | Links | Contact
NitroExpress.com: Cleaning a double question

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
Postman
.375 member


Reged: 25/09/13
Posts: 846
Loc: Canada
Cleaning a double question
      #283686 - 10/06/16 06:24 AM

So here's a question that I've had for some time but was afraid to ask:

With my more pedestrian rifles, I normally run a patch through the bore(s) with solvent, then I will insert a chamber plug and fill the bore with Butches Bore Shine, seal the muzzles with Saran Wrap and an elastic band to prevent evaporation, then let the chemicals soak and remove the copper fouling over the course of 4 days or so. After pouring out the solvent, several oil soaked patches nicely finishes the job. This works absolutely wonderfully for bolt guns etc, but is it safe to do with multi barrel firearms where there are soft solder joins between the barrels? Would the solvent weaken or erode the solder? I have erred on the side of caution with my expensive doubles, and have not done the soak routine, but I find that copper fouling never really comes out of a bore unless one soaks or unless one scrubs it to death.....

So how do others clean? Any soakers out there? Anyone worried about the barrel join material?

Any and all opinions / commentary would be most welcome!!!

Many thanks,

Postman

Post Extras: Print Post   Remind Me!   Notify Moderator  
Wayne59
.400 member


Reged: 20/06/15
Posts: 1219
Loc: Lagrange Ga. USA
Re: Cleaning a double question [Re: Postman]
      #283695 - 10/06/16 08:35 AM

I have been trying to find something that will work on copper fouling. I have a couple of rifles that copper foul badly. So far I haven't found anything that works as advertised. I may have to try your method.

Post Extras: Print Post   Remind Me!   Notify Moderator  
mchughcb
.333 member


Reged: 21/02/14
Posts: 377
Loc: Victoria, Australia
Re: Cleaning a double question [Re: Wayne59]
      #283715 - 10/06/16 11:26 PM

Guys I clean my double with KG12 after I get the carbon out. I will make a video one day soon of the copper being lifted out of the barrel in about 3 minutes. KG12 leaves the opposition for dead and you don't need to scrub much or fill the barrel with solvent over night.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Wayne59
.400 member


Reged: 20/06/15
Posts: 1219
Loc: Lagrange Ga. USA
Re: Cleaning a double question [Re: mchughcb]
      #283730 - 11/06/16 05:29 AM

Who makes KG12. Is it available every where.

Post Extras: Print Post   Remind Me!   Notify Moderator  
mchughcb
.333 member


Reged: 21/02/14
Posts: 377
Loc: Victoria, Australia
Re: Cleaning a double question [Re: Wayne59]
      #283745 - 11/06/16 03:19 PM

http://www.brownells.com/gun-cleaning-ch...-prod44933.aspx

Just order mine online.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Rockdoc
.400 member


Reged: 07/12/06
Posts: 1212
Loc: NSW, Australia
Re: Cleaning a double question [Re: mchughcb]
      #283746 - 11/06/16 03:36 PM

Quote:

Guys I clean my double with KG12 after I get the carbon out. I will make a video one day soon of the copper being lifted out of the barrel in about 3 minutes. KG12 leaves the opposition for dead and you don't need to scrub much or fill the barrel with solvent over night.



Me too. After 37 years best I have found. Oil gun with Ballistol.

Cheers. Chris

Post Extras: Print Post   Remind Me!   Notify Moderator  
Postman
.375 member


Reged: 25/09/13
Posts: 846
Loc: Canada
Re: Cleaning a double question [Re: Rockdoc]
      #283752 - 11/06/16 10:57 PM

So the million dollar question remains:

Will various barrel solvents attack or otherwise compromise the integrity of the barrel join solder? Not being a builder, I don't even know if it is copper pipe plumbers solder, silver solder, or a brazing rod that is used in the barrel joins, so I'm fairly ignorant wrt to the exposure of same to the various solvents......

Post Extras: Print Post   Remind Me!   Notify Moderator  
mchughcb
.333 member


Reged: 21/02/14
Posts: 377
Loc: Victoria, Australia
Re: Cleaning a double question [Re: Postman]
      #283755 - 11/06/16 11:58 PM

I've been using for years on my drilling and it's got more barrel soldering than any double. No sign of attack.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Re: Cleaning a double question [Re: mchughcb]
      #283756 - 12/06/16 12:09 AM

Quote:

http://www.brownells.com/gun-cleaning-ch...-prod44933.aspx

Just order mine online.



This is the same solvent they used at the long range shooting school I attended a while back..worked very well...

Ripp

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
1 registered and 137 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2699

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved