Home | Ezine | Forums | Links | Contact
NitroExpress.com: 416 Taylor loads

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Pages: 1
Crobar
.224 member


Reged: 24/11/12
Posts: 11
Loc: BC Canada
416 Taylor loads
      #279883 - 26/03/16 04:16 PM

http://i193.photobucket.com/albums/z6/kevan4570/IMG_0916_zpsqgygppu1.jpg

Hope this come through..

--------------------
Expect nothing and you won't be disappointed..


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: 416 Taylor loads [Re: Crobar]
      #279898 - 27/03/16 03:09 AM

Nice!

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ash
.400 member


Reged: 10/05/11
Posts: 1652
Loc: Australia
Re: 416 Taylor loads [Re: DarylS]
      #279914 - 27/03/16 10:57 AM

Wow that is gorgeous! Is that one of the full ribs that a member here was selling?

Can't help on loads - I assume .416 ruger starting loads could be used as a starting point.

Edited by Ash (27/03/16 10:58 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Crobar
.224 member


Reged: 24/11/12
Posts: 11
Loc: BC Canada
Re: 416 Taylor loads [Re: Ash]
      #279919 - 27/03/16 12:39 PM

I'm sorry, I was so concerned about getting the picture through that I did not add my query for load information.
The rifle is an '03 A3 Springfield built by my late Brother over 20 yrs. ago when he was attending Trinidad College.
He did all the metalwork and stock, it has a full octagon barrel and is 9 lbs. as pictured.
I would not want it any lighter..
My only change will be to for a lower mounted glass, probably a 1.5-5 Leupold.

Any load info will be seriously appreciated..

--------------------
Expect nothing and you won't be disappointed..


Post Extras: Print Post   Remind Me!   Notify Moderator  
DoubleD
.400 member


Reged: 23/11/03
Posts: 2386
Loc: Retired in Oklahoma
Re: 416 Taylor loads [Re: Crobar]
      #279920 - 27/03/16 01:07 PM

Try this link for a dedicated .416 Taylor page.

http://www.lchr.org/a/25/kc/

Lots of 416 Taylor info there.

--------------------
DD, Ret.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3475
Loc: Darwin, Top End of Australia
Re: 416 Taylor loads [Re: DoubleD]
      #281171 - 19/04/16 10:54 AM

Here's a recommendation from a long-time .416 Taylor owner, FWIW.

No need to chase 2400 fps. Period!

If you shoot the 400-grainers at 2250 to 2280 no powder compression is needed, the cases will last forever, the bullets will penetrate deeply and kill better, and that 9-pound rifle will not beat the crap out of you.

Remember the British .400 Nitro killed tons of DG over the decades with an MV of 2150 fps from the test barrel, considerably less from shorter-barrelled hunting rifles. Nobody had a chronograph back then, so no-one questioned the fact that it just worked!

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au


Post Extras: Print Post   Remind Me!   Notify Moderator  
cooch
.300 member


Reged: 21/09/03
Posts: 192
Loc: Southern NSW
Re: 416 Taylor loads [Re: Marrakai]
      #281185 - 19/04/16 08:09 PM

I'm contemplating acquiring a BLR for rebarrelling and setting up as a hound-gun. Shots at Sambar are rarely over 100 yards.

This calibre sounds almost ideal.

--------------------
"The only logical response to an animal that lives obsessed with avoiding capture is to chase it." - Jose Ortega y Gassett


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: 416 Taylor loads [Re: cooch]
      #281191 - 20/04/16 01:56 AM

Ken Waters wrote up the .416 Taylor in an experimental Winchester M70 they sent to him, as well, John Whooters used a .416 Taylor in Africa for Cape Buffalo.

Both guys seemed to not have trouble hitting the 2,400fps range with 400's and one can always use 300's to 350's for 'lesser' game, at higher speeds, flatter trajectories.

Ken Waters, "Pet Loads" and Wolf Pumbishing's "Wildcat Cartridges Combo Edition" and "Big Bore Rifles and Cartridges" also have considerable data. This data might all be available on-line.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
coll416
.275 member


Reged: 19/02/12
Posts: 77
Loc: Central Queensland
Re: 416 Taylor loads [Re: DarylS]
      #282634 - 19/05/16 08:29 AM

AR2206H/H4895 (outside Oz) is the best powder I have used for.416 Taylor when using 400gn-410gn bullets. My favourite load goes 2360fps with 410gn Woodleigh soft. This load crunches big scrub bulls! I like using the 340gn Woodleigh at 2550fps foranything lighter.

I am happy to share loadsifyou pm!


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: 416 Taylor loads [Re: coll416]
      #282674 - 20/05/16 01:58 AM

Ken Waters and John Whooters were loading the .416 Taylor with IMR4320.

I would prefer the H4895 (Extreme) loads myself if hunting in hot climates.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Re: 416 Taylor loads [Re: DarylS]
      #282688 - 20/05/16 10:59 AM

I have used the 416Rem on numerous hunts in Africa--think it has slightly higher case capacity than the Taylor however think similar powders would work??

I have used 400gr A-Frames for softs and 400gr Barnes solids with RL-15--easily hitting the 2400fps mark..but agree with one of the previous comments..no need to be 2400fps--anything between 2150 and that is good and will work very well with a well placed shot..

Ripp

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: 416 Taylor loads [Re: Ripp]
      #286431 - 14/08/16 10:04 AM

In Waters Winchester .416 Taylor rifle, 70.0gr. IMR4320 with a 400gr. Colarado Custom went 2,401fps producing 5,116fpe, and 72.0gr. was maximum running 2,447fps for 5,320 fpe.

Ken ALSO ran the 300gr. Colorado SP's at up to 2,711fps using 45.0gr. of the same powder.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Wanabebwana
.300 member


Reged: 11/01/13
Posts: 221
Loc: Canada
Re: 416 Taylor loads [Re: DarylS]
      #286628 - 20/08/16 12:58 PM

The best thing about the Taylor is that it can simply be rechambered to .416 Ruger. Factory ammo and lower pressure are a good thing. Shaving .06" from the rear mag wall of the '03 allows longer COL and lower pressures. On the other hand 400gr at 2250-2300fps will do the job.( Works for the .404 Jeffrey).

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 76 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4391

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved