Home | Ezine | Forums | Links | Contact
NitroExpress.com: Recoil speed x trigger pull weight

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
DDouble
.300 member


Reged: 17/02/06
Posts: 127
Loc: Brazil
Recoil speed x trigger pull weight
      #280341 - 05/04/16 08:01 AM

I have both a .470 and a 9.3x74R DRs.

Because the rifle is much lighter, the speed of the kick on the 9.3mm is much greater.

The 9.3mm truly "kicks" while the .470 only "pushes" (although farther).

The question is: which one would you set up your TRIGGER PULL WEIGHT heavier??? The 9.3 or the 470?? Which one is more likely to double charge the faster kick of the 9.3mm or the lengthier push of the .470???

My original idea was to set up the .470 a pound heavier, but could it be best to do the opposite???

Would you consider 3.5 lbs as to light for a .470???

Thanks

--------------------
Ddouble

Post Extras: Print Post   Remind Me!   Notify Moderator  
4seventy
Sponsor


Reged: 07/05/03
Posts: 2210
Loc: Queensland Australia
Re: Recoil speed x trigger pull weight [Re: DDouble]
      #280351 - 05/04/16 11:26 AM

IMO 3.5lbs is pretty light for a big double.
Personally I like 4-5 pounds for both front and rear triggers on a 470NE double.

Thesedays a lot of the 'new to doubles' guys want their DR trigger pulls really light, some times 3 pounds or lighter.
At that weight it is no surprise that some are having occasional double discharges as well as accidental discharges.

If the two doubles were mine, I'd prefer them both to have similar pulls of between 4 to 5 pounds.

Post Extras: Print Post   Remind Me!   Notify Moderator  
crshelton
.333 member


Reged: 10/11/15
Posts: 379
Loc: Republic of Texas
Re: Recoil speed x trigger pull weight [Re: 4seventy]
      #280353 - 05/04/16 11:34 AM

All my rifles go off at 4 pounds. That really simplifies taking the shot and it becomes subconscious when hunting. You and the rifle trigger are one - when it is time to fire, the rifle does and the game falls.

--------------------
CRS,NRA Benefactor Member, TSRA, DRSS, DWWC, Whittington Center
Android Ballistics App at http://www.xplat.net/

Post Extras: Print Post   Remind Me!   Notify Moderator  
4seventy
Sponsor


Reged: 07/05/03
Posts: 2210
Loc: Queensland Australia
Re: Recoil speed x trigger pull weight [Re: crshelton]
      #280356 - 05/04/16 12:02 PM

And of course pull weight is only part of the deal.
Sear depth of engagement and angles are just as important in producing crisp yet safe trigger pulls.

Post Extras: Print Post   Remind Me!   Notify Moderator  
DDouble
.300 member


Reged: 17/02/06
Posts: 127
Loc: Brazil
Re: Recoil speed x trigger pull weight [Re: 4seventy]
      #280375 - 05/04/16 11:36 PM


thanks for inputs and I agree angle is so important for avoiding unsafe triggers

But my question remains: do you agree that, if inertia is opposite to acceleration, a lighter rifle should be "unsafer" at same angle and sear depth???

--------------------
Ddouble

Post Extras: Print Post   Remind Me!   Notify Moderator  
ejsxs
.224 member


Reged: 29/03/08
Posts: 14
Loc: NA
Re: Recoil speed x trigger pull weight [Re: DDouble]
      #280391 - 06/04/16 04:55 AM

My experience is that rifle weight should be proportional to trigger pull. The heavier the rifle (shotgun) so should be its trigger pull. The worst scenario is a big calibre/light rifle with a heavy trigger pull, IMO.

Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39245
Loc: Barossa Valley, South Australi...
Re: Recoil speed x trigger pull weight [Re: ejsxs]
      #280505 - 08/04/16 01:20 AM

My Jeffery before the triggers were fixed went off at 11 lbs and 13 lbs. One wondered why I couldn't shoot 'groups' well with it at those weights. I used to break into a sweat trying to squeeze the trigger especially the rear one. Used to double as well. But the gunsmith fixed that, except when I muck up now.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"

Post Extras: Print Post   Remind Me!   Notify Moderator  
gallipliphile
.224 member


Reged: 26/03/16
Posts: 21
Loc: New Zealand
Re: Recoil speed x trigger pull weight [Re: NitroX]
      #280789 - 12/04/16 04:19 PM

I once read; the rear trigger should have heavier pull.

Typically it will be operated with the stronger part of finger... and will therefore feel the same?

Usually 1/2 pound difference if u r in the 4 or 5 pound region i read.

So that's how i set shotguns up now...

As for trigger pulls on a heavy dangerous game rifle which gets used on dangerous game by very scared untrained newbies... 11 and 13 sounds perfect?

Just my $.2

Regards

Edited by gallipliphile (13/04/16 05:33 AM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 92 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2369

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved