Home | Ezine | Forums | Links | Contact
NitroExpress.com: Lee Speed 375 FL NE 2.5"

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Lee Speed Forum & Archive

Pages: 1
Bidgee
.375 member


Reged: 08/04/15
Posts: 711
Loc: Northern Rivers, NSW
Lee Speed 375 FL NE 2.5"
      #269659 - 26/08/15 04:37 PM

A friend of mine has just purchased a Lee Speed .375 FL NE 2.5" and I thought that I would share some photos of it on here.

And no, he doesn't want to sell it!



Post Extras: Print Post   Remind Me!   Notify Moderator  
Bidgee
.375 member


Reged: 08/04/15
Posts: 711
Loc: Northern Rivers, NSW
Re: Lee Speed 375 FL NE 2.5" [Re: Bidgee]
      #269660 - 26/08/15 04:43 PM

Here are some more photos.







I will get a few better shot including full length over the next few days.

Cheers


Post Extras: Print Post   Remind Me!   Notify Moderator  
LesLeeSpeed
.300 member


Reged: 14/11/13
Posts: 223
Loc: Queensland Australia
Re: Lee Speed 375 FL NE 2.5" [Re: Bidgee]
      #269664 - 26/08/15 05:37 PM

I think you probably need to borrow it from him for a couple of years to use as a pattern. If you get the oportunity, see what mods were made to the mag and rails to make the straight case feed.
LesLeeSpeed


Post Extras: Print Post   Remind Me!   Notify Moderator  
Waidmannsheil
.400 member


Reged: 19/04/13
Posts: 2377
Loc: Melbourne Australia
Re: Lee Speed 375 FL NE 2.5" [Re: LesLeeSpeed]
      #269667 - 27/08/15 06:44 AM

Looks fantastic and in a great caliber.

Waidmannsheil.

--------------------
There is nothing wrong with vegetarian food, so long as there is meat with it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
A10ACN
.300 member


Reged: 30/01/05
Posts: 198
Loc: USA
Re: Lee Speed 375 FL NE 2.5" [Re: Waidmannsheil]
      #269768 - 29/08/15 11:02 PM

Oh, yeah! And looks to be in great condition. Been wanting one of those for a while now. Show us some shooting results!

Post Extras: Print Post   Remind Me!   Notify Moderator  
Bidgee
.375 member


Reged: 08/04/15
Posts: 711
Loc: Northern Rivers, NSW
Re: Lee Speed 375 FL NE 2.5" [Re: A10ACN]
      #270101 - 07/09/15 03:26 PM

here are a couple more photos of my mates .375 that I took today.



Post Extras: Print Post   Remind Me!   Notify Moderator  
Bidgee
.375 member


Reged: 08/04/15
Posts: 711
Loc: Northern Rivers, NSW
Re: Lee Speed 375 FL NE 2.5" [Re: Bidgee]
      #270102 - 07/09/15 03:28 PM

And another.



Cheers


Post Extras: Print Post   Remind Me!   Notify Moderator  
Viking338
.333 member


Reged: 11/08/11
Posts: 480
Loc: Queensland Australia
Re: Lee Speed 375 FL NE 2.5" [Re: Bidgee]
      #270114 - 07/09/15 08:00 PM

Oh my that brings a tear to my eye, I dream one day of owning one like that

Post Extras: Print Post   Remind Me!   Notify Moderator  
buckbrush
.300 member


Reged: 23/08/07
Posts: 120
Loc: Alberta
Re: Lee Speed 375 FL NE 2.5" [Re: Viking338]
      #270685 - 19/09/15 12:03 PM

That checkering pattern is unusual for a Lee Speed.

Post Extras: Print Post   Remind Me!   Notify Moderator  
BillfromOregon
.333 member


Reged: 27/10/04
Posts: 254
Loc: Sweetwater, by God Texas
Re: Lee Speed 375 FL NE 2.5" [Re: buckbrush]
      #276019 - 03/01/16 10:48 AM

Tis a pearler indeed!

Post Extras: Print Post   Remind Me!   Notify Moderator  
Roy
.300 member


Reged: 06/09/15
Posts: 219
Loc: New Mexico
Re: Lee Speed 375 FL NE 2.5" [Re: BillfromOregon]
      #276047 - 04/01/16 04:49 AM

That's a cracker...!

Just one 'major' fault with it.....it's not mine.....!

Thanks for sharing,

Roy.

--------------------
My Website: www.wilkinsonfscollection.com

http://wilkinsonfscollection.com/wilkinsonfscollection.com/The_Lee-Speed_Rifle.html


Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3522
Loc: Colorado
Re: Lee Speed 375 FL NE 2.5" [Re: Roy]
      #276050 - 04/01/16 06:52 AM

What a great rifle!
Not a thing wrong with that one!

--------------------
He who lives in the past is doomed to enjoy it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
VonGruff
.400 member


Reged: 08/02/09
Posts: 1119
Loc: South Otago, New Zealand.
Re: Lee Speed 375 FL NE 2.5" [Re: Huvius]
      #276054 - 04/01/16 07:54 AM

Definitely a treasure to find one and in such great condition.
Have you got some more detail on the differences that allow it to feed the 375 cartridges

--------------------
Von Gruff.

Exodus 20:1-17

Acts 4:10-12


Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3522
Loc: Colorado
Re: Lee Speed 375 FL NE 2.5" [Re: VonGruff]
      #276069 - 04/01/16 12:57 PM

VonGruff, your post prompted me to take a look at my own 303 Lee Speed and my guess is that the .375s would feed just fine.
The ramp is quite steep in my gun but it looks like the carrier will angle the tips of the cartridges up enough that feeding is kept quite smooth.
The rounded nose bullets of the day would most likely feed quite smoothly too from the same magazine but I would be interested in seeing if the follower is any different in the .375 as opposed to the 303. I would think that a follower that pushes the front end of the cartridge up would help in feeding.

--------------------
He who lives in the past is doomed to enjoy it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
VonGruff
.400 member


Reged: 08/02/09
Posts: 1119
Loc: South Otago, New Zealand.
Re: Lee Speed 375 FL NE 2.5" [Re: Huvius]
      #276072 - 04/01/16 04:02 PM

It was the width at the front of the mag that I was thinking of with the bullet and case dia as more of a limiting factor than the angle of entry. Looking at the mag in Bidgee's posts it seems to be a shorter than standard 10 shot but longer than the 5 shot Lee Speed mag so wondered if it was a special mag for the 375 cartridge that was wider in the front..

--------------------
Von Gruff.

Exodus 20:1-17

Acts 4:10-12


Post Extras: Print Post   Remind Me!   Notify Moderator  
BillfromOregon
.333 member


Reged: 27/10/04
Posts: 254
Loc: Sweetwater, by God Texas
Re: Lee Speed 375 FL NE 2.5" [Re: VonGruff]
      #276120 - 05/01/16 11:23 AM

For what it is worth, a .38-55 round will not feed through the "guide ears" at the front of two Enfield magazines I have, but certainly would with a bit of file work.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Sarg
.400 member


Reged: 20/01/07
Posts: 1365
Loc: Nil
Re: Lee Speed 375 FL NE 2.5" [Re: BillfromOregon]
      #276128 - 05/01/16 03:52 PM

Bill that would be a SMLE mag I assume, I don't think any 375's were build on that action type all on the MLM MLE Long Tom action & mag set up, quite different ?

I have a 375Ex & 2 mags + a 8mm Lee Speed, but not with me right now, I must go get the 375Ex to check the mag for you guys, but from memory looks the same to me other than being shorter & squared off, same ever where else.... I think !


Post Extras: Print Post   Remind Me!   Notify Moderator  
AlanD
.275 member


Reged: 14/12/08
Posts: 55
Loc: NSW Australia
Re: Lee Speed 375 FL NE 2.5" [Re: Sarg]
      #276130 - 05/01/16 04:53 PM

What a handsome rifle!

I thought the magazine looks a little deeper than the standard 5 or 6 round magazine. Has it been inserted into the magazine well fully?

Regards

AlanD
Sydney


Post Extras: Print Post   Remind Me!   Notify Moderator  
Sarg
.400 member


Reged: 20/01/07
Posts: 1365
Loc: Nil
Re: Lee Speed 375 FL NE 2.5" [Re: AlanD]
      #276168 - 06/01/16 08:28 AM

Would you not listen to some one who has more then one of them & stated such in a post before yours ?

If he stated it was shorter the normal would you not think shorter than the 10 shot mag ?

A lot of the BSA/Lee Speed sporters had 10rd mags, around a third of mine have them, I differentiate between the Lee Speed-BSA sporter & the later plain stocked nonengraved BSA sporter which mostly has the 10 shot mag but again a few came or had fitted the shorter mag, hard to tell if these are factory as no engraving on this later model, having said that one of mine was, it was missing the fore wood so I don't know what type it had unfortunately.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 5 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 6206

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved