Home | Ezine | Forums | Links | Contact
NitroExpress.com: How to zero a vintage german scope.

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1
Gundog01
.333 member


Reged: 16/05/15
Posts: 291
Loc: Ohio usa
How to zero a vintage german scope.
      #273847 - 23/11/15 12:24 PM

I have a Mauser type G in 9.3x62, it has an original optic on it, from the 20s, I can not read the writing of who made it, but it reads x5 on the tube and 200 & 300 respectively on the dial on the top, I am not familiar with the process of dialing in the wind & elevation of this type of scope, I shot it today and it was about 6" low at 50yrds. Thank you.

Post Extras: Print Post   Remind Me!   Notify Moderator  
kuduae
.400 member


Reged: 13/01/10
Posts: 1792
Loc: middle of Germany
Re: How to zero a vintage german scope. [Re: Gundog01]
      #273874 - 24/11/15 12:35 AM

A photo or two would be helpful! Turning the dial on top clockwwise makes the rifle shoot up. I guess about a quarter turn is more than 6", but it's cut and try. Disregard the range numbers on top of the dial. These are on a seperate ring clamped on by Little screw(s) and is to be indexed after zeroing in the rifle.
Windage adjustment is not in the scope, but usually by opposing screws in the rear mount foot.On some old Mounts it is by a crossfeed with a square key in the rear mount foot, sometimes there is no adjustment provided at all. Then you have to drive the front base plate left or right in it's Slot.


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39881
Loc: Barossa Valley, South Australi...
Re: How to zero a vintage german scope. [Re: kuduae]
      #273875 - 24/11/15 12:51 AM

Kuduae,

Sounds familiar.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 166 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 1362

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved