Home | Ezine | Forums | Links | Contact
NitroExpress.com: Fosbery again...

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
Marrakai
.416 member


Reged: 09/01/03
Posts: 3591
Loc: Darwin, Top End of Australia
Fosbery again...
      #269452 - 20/08/15 01:35 PM

Just tossed a post in the 'Bore Guns' forum, but thought I should put something here too.

I have been having good success lately tossing these big slugs, and the round balls for the double-eight as well. No rejects, and no frosting or wrinkles. I have finally learned just how much heat to put into the mold with my propane torch before starting, and also to slow down a fair bit between casts. There's a lot of heat in a 1 3/4 oz slug or a 2-oz round ball, and it has to be managed a bit more carefully than for .38 pistol bullets!

Anyway, lets hope they all chew-out the ten-ring on the weekend! (Fat Chance! )



--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras: Print Post   Remind Me!   Notify Moderator  
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Re: Fosbery again... [Re: Marrakai]
      #269454 - 20/08/15 06:33 PM

G'Day Fella's,

Impressive looking Marrakai!
Thats a large lump of lead and not to many pills for each pound of lead!!!

Doh!
Homer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"

Post Extras: Print Post   Remind Me!   Notify Moderator  
fsrmg1
.300 member


Reged: 25/07/03
Posts: 158
Loc: Western Australia
Re: Fosbery again... [Re: Homer]
      #276309 - 09/01/16 08:36 PM

Who was the mould maker? Are they still around?

--------------------
Cheers,

Rich

Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3591
Loc: Darwin, Top End of Australia
Re: Fosbery again... [Re: fsrmg1]
      #277093 - 25/01/16 12:42 PM

fsrmg1:
Apologies for late reply, been traveling...

Mold is brass, made by Jim Allison under the CBE shingle.

Cast Bullet Engineering - Jim Allison
Australia
http://www.castbulletengineering.com.au/

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras: Print Post   Remind Me!   Notify Moderator  
450_Ackley
.375 member


Reged: 06/02/03
Posts: 583
Loc: Darling Downs, Qld Australia
Re: Fosbery again... [Re: Marrakai]
      #277115 - 25/01/16 06:21 PM

Jim no longer owns CBE, I bought the company off him about 2 1/2 years ago.
We still make that mould though.

Regards,
David.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3591
Loc: Darwin, Top End of Australia
Re: Fosbery again... [Re: 450_Ackley]
      #277125 - 25/01/16 11:52 PM

Good to hear those molds are still available; thanks for the update David.
There are still references to Jim at CBE in several places on the web, guess they will disappear over time.

Jim did make all my brass molds of course, but sounds like you will be making my next one!

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras: Print Post   Remind Me!   Notify Moderator  
mart
.300 member


Reged: 20/01/04
Posts: 107
Loc: Alaska
Re: Fosbery again... [Re: Marrakai]
      #277596 - 05/02/16 06:49 PM

That's a big bullet. Very similar to one I cast for a friend. He had the mold but not the equipment to cast with so I throw a few for him every so often.

That's a 300 grain 45 Colt bullet on the left. The 12 bore bullet is 1100 grains according to the fellow who owns the mold.

Post Extras: Print Post   Remind Me!   Notify Moderator  
fsrmg1
.300 member


Reged: 25/07/03
Posts: 158
Loc: Western Australia
Re: Fosbery again... [Re: mart]
      #278879 - 06/03/16 11:21 AM

Glad to hear CBE will still be carrying on. Over the years I bought a number of moulds bearing that brand and have been happy with every single one of them.

--------------------
Cheers,

Rich

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 14 anonymous users are browsing this forum.

Moderator:  DarylS 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 5009

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved