Home | Ezine | Forums | Links | Contact
NitroExpress.com: Hammer Falling Block signed Miller&Greiss München

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

Pages: 1 | 2 | (show all)
chapmen
.300 member


Reged: 26/02/10
Posts: 229
Loc: Middle of germany
Re: Hammer Falling Block signed Miller&Greiss München [Re: 93x64mm]
      #268225 - 19/07/15 08:34 PM

Just made an casting.

barrel is 7.92mm / 8.15mm, throat 8.3mm.
Twist is 320mm / what is around 12,5".
I am in the lucky position to have an quite big ammount of the Hirtenberger factory made ammo,
so i think i dont have do reload the next twenty years.
But also it would be interesting to know what the rifle says to cast bullets....and yes, i can cast bullets on my own.

--------------------
some fine old guns from germany :
www.jagdwaffensammler.de


Post Extras: Print Post   Remind Me!   Notify Moderator  
chapmen
.300 member


Reged: 26/02/10
Posts: 229
Loc: Middle of germany
Re: Hammer Falling Block signed Miller&Greiss München [Re: kuduae]
      #268227 - 19/07/15 08:55 PM

Quote:


Right in part only. The gauge numbers did not indicate the groove diameter, but a diameter between the lands only. It was measured at the proofhouse using cylindrical plugs. The largest number that passed the barrel was stamped. There were no intermediate steps from gauge number to gauge number. Here a # 156.14 = 7.87 mm = .310" plug passed the barrel. but a # 141.96 = 8.13 mm = .320" one did not. So the actual bore/land diameter of a Barrel marked 156.14 may have been as large as 8.12 mm = .319".





My mistake- i mixed groove and land ........

--------------------
some fine old guns from germany :
www.jagdwaffensammler.de


Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 8716
Loc: There's a lighthouse in the mi...
Re: Hammer Falling Block signed Miller&Greiss München [Re: chapmen]
      #268235 - 20/07/15 12:30 AM

seems you are quite right with the Hirtenberger ammo in this rifle.
would be nice if you can shoot this load through a chrony sometimes.

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | (show all)



Extra information
0 registered and 36 anonymous users are browsing this forum.

Moderator:  Huvius 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 11572

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved