Home | Ezine | Forums | Links | Contact
NitroExpress.com: 7.65x53 argentine

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
ducmarc
.400 member


Reged: 14/07/14
Posts: 1207
Loc: fla
7.65x53 argentine
      #261872 - 07/03/15 02:37 PM

was the 7.65 x53 argentine ever punched out to 9mm or bigger picked up a nice little project 91 with a crappie barrel thinking about a light little thumper for the woods could go with 35 remington but would like a europeon caliber.

--------------------
'killed by death' Lemmy.. ' boil the dog ' Elvis Manywounds "my best friend is my magnum forty four" hank willams the third.

Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 8729
Loc: There's a lighthouse in the mi...
Re: 7.65x53 argentine [Re: ducmarc]
      #261885 - 07/03/15 10:40 PM

dont believe there is a wildcat based on the 7,65x53 so your best option would be the 9x57 Mauser

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras: Print Post   Remind Me!   Notify Moderator  
ducmarc
.400 member


Reged: 14/07/14
Posts: 1207
Loc: fla
Re: 7.65x53 argentine [Re: lancaster]
      #262015 - 10/03/15 01:29 PM

do you think the 91 action would hold up to the 9x57?

--------------------
'killed by death' Lemmy.. ' boil the dog ' Elvis Manywounds "my best friend is my magnum forty four" hank willams the third.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Ireload2
.224 member


Reged: 11/08/13
Posts: 41
Loc: USA
Re: 7.65x53 argentine [Re: ducmarc]
      #263126 - 04/04/15 07:38 PM

Sure you can check the data for the 7.65 and the 9X57 on the CIP site.
The standard pressure for the 9X57 is a good bit lower than the 7.65.
In many ways the 9X57 is a better deal since it is based on the 8X57 case. The 8X57 brass is more common and there are known standards for the headspace gauges. Good luck figuring out the dimensions
for a 7.65 No Go Gauge. The 7.65 has something CIP calls the delta L problem. With the delta L problem the longest possible cartridge is longer than the minimum chamber. The delta L is not listed in the English drawing but it is listed on the German language CIP drawing.
I put together a little spreadsheet to calculate the "headspace" and cartridge length dimensions using a .375 datum circle for the 7.65. I found that there is a delta L but it is different than what CIP shows. All in all the 9X57 is a better deal.

7.65 page

http://www.cip-bobp.org/homologation/en/tdcc_public?page=3&cartridge_type_id=1

9X57 page

http://www.cip-bobp.org/homologation/en/tdcc_public?page=4&cartridge_type_id=1




Edited by Ireload2 (04/04/15 07:47 PM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
Ash
.400 member


Reged: 10/05/11
Posts: 1653
Loc: Australia
Re: 7.65x53 argentine [Re: Ireload2]
      #263833 - 19/04/15 04:46 PM

If the 1888 held up to 9x57 the 91 should do just fine

--------------------
.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 31 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2344

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved