Home | Ezine | Forums | Links | Contact
NitroExpress.com: Manton - must cock right lock first

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifles

Pages: 1
Kynoch
.224 member


Reged: 11/02/05
Posts: 40
Loc: Iowa, United States
Manton - must cock right lock first
      #263279 - 08/04/15 12:07 PM

Received a Manton bore last week. I was surprised to learn that the right lock must be cock at least once before the left lock can be cocked. When the right hammer is cocked, the rear trigger is "set" (moves forward) and allows the left hammer to engage. Without this, the left hammer can be thumbed back but no full or half cock can be felt. The right lock can be left cocked or at half cock or lowered backed down and the left hammer will engage. Is this by design or is something wrong? Very repeatable. Anyone else hear of a set up like this? The locks have stalking safeties. Will get some opinions in Tulsa this weekend. Thanks in advance.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Ash
.400 member


Reged: 10/05/11
Posts: 1652
Loc: Australia
Re: Manton - must cock right lock first [Re: Kynoch]
      #263292 - 08/04/15 09:03 PM

More details on the rifle! Can't help you with the questions, but sounds unusual.

--------------------
.


Post Extras: Print Post   Remind Me!   Notify Moderator  
gungadoug
.333 member


Reged: 13/08/12
Posts: 285
Loc: NM
Re: Manton - must cock right lock first [Re: Ash]
      #263302 - 08/04/15 11:11 PM

I have not heard of such, and it sounds suspect to me. I would remove the locks, I am assuming side or back action locks here, and see if the triggers act that way with one or more locks out. It sure sounds like an interference thing to me! I suppose it could be designed that way, but on a bore gun I would think it could be dangerous in certain situations.
Interesting! Doug


Post Extras: Print Post   Remind Me!   Notify Moderator  
Kynoch
.224 member


Reged: 11/02/05
Posts: 40
Loc: Iowa, United States
Re: Manton - must cock right lock first [Re: gungadoug]
      #263731 - 18/04/15 02:07 AM

It was a problem and not buy design. I took the rifle to Tulsa last weekend. Kirk Merrington was kind enough to take a look at it for me. With the locks off you could see that the tips of the sears were touching due to wood shrinkage. Backing off the lock screw a quarter turn and the locks work perfectly and exactly one would expect. Thanks for the comments everyone.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 78 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2043

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved