Home | Ezine | Forums | Links | Contact
NitroExpress.com: #3 remington hepburn

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
ducmarc
.400 member


Reged: 14/07/14
Posts: 1207
Loc: fla
#3 remington hepburn
      #259670 - 30/01/15 01:30 PM

well i've been wanting to build a big bore rifle for a while now with no real luck when my dad called he found his remington hepburn action that he had lost for 20 years. not wanting it he gave it to me so whats a good big bore caliber for that type of action .i beleive it was orginally 38-55 i thought of 450-358,400 jeffery or maybe a 450 nitro express if the action would hold it

--------------------
'killed by death' Lemmy.. ' boil the dog ' Elvis Manywounds "my best friend is my magnum forty four" hank willams the third.

Post Extras: Print Post   Remind Me!   Notify Moderator  
rglenz
.300 member


Reged: 14/03/08
Posts: 136
Loc: w. Minn
Re: #3 remington hepburn [Re: ducmarc]
      #259674 - 30/01/15 03:10 PM

Remington Hepburn's are black powder actions,sell it to a collector and get something made for nitro.

Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 9023
Loc: There's a lighthouse in the mi...
Re: #3 remington hepburn [Re: rglenz]
      #259678 - 30/01/15 05:41 PM

45-120 and having fun

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras: Print Post   Remind Me!   Notify Moderator  
Ash
.400 member


Reged: 10/05/11
Posts: 1653
Loc: Australia
Re: #3 remington hepburn [Re: lancaster]
      #259684 - 30/01/15 07:33 PM

Lucky!

I'd love a remington Hepburn someday. In my opinion these are the nicest American single shot actions (that I've come across) so far.

--------------------
.

Post Extras: Print Post   Remind Me!   Notify Moderator  
xausa
.400 member


Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
Re: #3 remington hepburn [Re: Ash]
      #259690 - 30/01/15 09:17 PM

The problem with Remington Hepburns is stocking them.

Fitting a stock with minimal drop is a real problem because of the way the tangs are angled.

Post Extras: Print Post   Remind Me!   Notify Moderator  
CptCurlAdministrator
.450 member


Reged: 01/05/04
Posts: 5284
Loc: Fincastle, Botetourt County, V...
Re: #3 remington hepburn [Re: xausa]
      #259693 - 30/01/15 11:20 PM

The Hepburn has its firing pin at a steep angle. This requires precise bushing and fitting to prevent the firing pin being stuck in the primer. That may be the biggest impediment to greater than black powder pressures. Otherwise, the action is strong.

Believe it or not, my varmint shooting partner from the early 80's had a Hepburn built up in the .22/30-30 Ackley Improved. The action held this cartridge fine, but he experienced problems with firing pin hangup early in the rifle's career. A little tweaking did correct this problem. Personally, I would not be so bold with a Hepburn unless the breech block had a major re-build on the lines of a Neidner-Mann treatment. I don't know if this is possible with the Hepburn block.

As said, stocking this action presents very limited possibilities. An all-out schuetzen style will be your best choice if you want to be true to the action's history. I once saw a beautiful schuetzen rendition of a Hepburn in fabulous flame colored fiddleback maple done by Hal Hartley. Something like that in a traditional caliber from 32-40 to 45-70 would be a lot of fun.

The only Hepburn in my past ownership was chambered in .22K Hornet. It retained its original wood from Remington. For some reason I could never get acceptable accuracy from it (the Hornet and K Hornet are notoriously difficult). I let it go for other horizons.

My very favorite vintage American action is the 1878 Sharps Borchardt. My next favorite is the 1885 Winchester High Wall. Sadly, all are gone to my demanding double rifle habit.

Curl

--------------------
RoscoeStephenson.com

YOUR DOUBLE RIFLE IS YOUR BEST FRIEND.



Post Extras: Print Post   Remind Me!   Notify Moderator  
CptCurlAdministrator
.450 member


Reged: 01/05/04
Posts: 5284
Loc: Fincastle, Botetourt County, V...
Re: #3 remington hepburn [Re: CptCurl]
      #259695 - 30/01/15 11:57 PM

I just did an internet search and came up with an example (not my gun):







Curl

--------------------
RoscoeStephenson.com

YOUR DOUBLE RIFLE IS YOUR BEST FRIEND.



Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26975
Loc: Beautiful British Columbia, Ca...
Re: #3 remington hepburn [Re: CptCurl]
      #259705 - 31/01/15 03:22 AM

Curl- THAT is lovely. The midrange sight fits nicley in front of the comb. A long range staff might hinder cleaning.
TKs for posting that picture.
They do made nice BP ctg. rifles.
The angled firing pins also hinder Sharps 68 and 74 actions.
If stuck and the block is dropped, oft times, the end of the pin gets broken.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras: Print Post   Remind Me!   Notify Moderator  
ducmarc
.400 member


Reged: 14/07/14
Posts: 1207
Loc: fla
Re: #3 remington hepburn [Re: DarylS]
      #260960 - 22/02/15 05:08 PM

picked up a green mountian tapered octogon barrelin 45 going to go with 45-90 .

--------------------
'killed by death' Lemmy.. ' boil the dog ' Elvis Manywounds "my best friend is my magnum forty four" hank willams the third.

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26975
Loc: Beautiful British Columbia, Ca...
Re: #3 remington hepburn [Re: ducmarc]
      #260975 - 23/02/15 03:29 AM

I have one of those GM tapered octagonal barrels in a Winchester heavy #3 or #3 1/2 taper - 35" long, 1" at the muzzle. Mine is chambered for the 1.9" case as I used my .458 2" reamer "held back". I had it threaded for my modified 1868 Sharps action.
With it's fairly long leade, smokeless loaded bullets can be seated out considerably and with it's bl. length, it gets approximately 250fps higher velocity than what is noted in Hodgdon's data - ie: for their listed 400gr. jacketed at 1,640fps, I get 1,850fps a pressures well under 24,000CUP. My loaded length is the same with those bullets as if loaded for a Marlin. Of course, my rifle cannot take the pressure the lever guns do, so I hold them to loads listed below 28,000CUP.
1,850fps is not shabby for a Sharps with 400gr. bullets.

Incidently, this barrel and load made a witnessed 7/8", 10 shot group at 100meters, off bags. Very accurate barrels. Got mine from trackofthewolf. This was when using a cheap $300.00 tang mounted aperture sight and #110.00 hooded front globe (Sharps design) with aperture.

With an original Sharps Carbine open rear sight and silver blade front, I've made a number of 1 1/2" 3 shot groups at 100 meters, witnessed by my brother, using 42.0gr. Benchmark and 506gr. cast RN w/GC @ 1,500fps.

Note the action is a modern Italian action in 4140 steel. The design is from 1868 - so low pressure only.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras: Print Post   Remind Me!   Notify Moderator  
ducmarc
.400 member


Reged: 14/07/14
Posts: 1207
Loc: fla
Re: #3 remington hepburn [Re: DarylS]
      #261099 - 24/02/15 04:04 PM

it slugged out at .456 think thats normal for a new green mountain barrel?

--------------------
'killed by death' Lemmy.. ' boil the dog ' Elvis Manywounds "my best friend is my magnum forty four" hank willams the third.

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26975
Loc: Beautiful British Columbia, Ca...
Re: #3 remington hepburn [Re: ducmarc]
      #261156 - 25/02/15 03:00 PM

Mine was .4565 as well. Bit tight - OK with jacketed .458" bullets as well.

I managed to pick up the 495gr. Schmitzer(spitzer) Lyman mould was well as the #457125 525gr.RN, both for $20.00, due to both being slightly undersized. They cast .4575" in my alloy and my rifle loves them, smokeless or black powder.

Those 18" twist GM barrels shoot!

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras: Print Post   Remind Me!   Notify Moderator  
ducmarc
.400 member


Reged: 14/07/14
Posts: 1207
Loc: fla
Re: #3 remington hepburn [Re: DarylS]
      #261421 - 01/03/15 03:18 PM

Glad to here that. just a wait now for my gunsmith. found a place for new walnut.

--------------------
'killed by death' Lemmy.. ' boil the dog ' Elvis Manywounds "my best friend is my magnum forty four" hank willams the third.

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26975
Loc: Beautiful British Columbia, Ca...
Re: #3 remington hepburn [Re: ducmarc]
      #261455 - 02/03/15 04:29 AM

The fist day benching my new GM barrel, the 18" twist, I was shooting 400gr. RP FN's & had worked up to 48.0gr. Benchmark in the 1.9", .45/60 case.
Chrono'd speed was 1,850fps in the 35" bl.

Using an Italian copy of a Soule Tang Sight and globed Sharps front with aperture, I managed a 7/8", 10 shot group off the bags at 100 meters. It was absolutely amazing. Most loads with REAL black powder run from 1" to 2" at 100 meters, 5-shot groups using same sights using the afor mentioned bullets. My rifle seems to prefer the 525gr. #457125. A blow-tube is used between shots and is shot 'dirty'. I have only just started working on the BP loads.

42gr. Benchmark and 506gr. RN GasChecked Lyman bullet (478gr.?) managed several 1 1/2" groups using open Sharps Sights, V and silver blade.

These loads were safe in my Sharps with the huge, BP firing pin.

The rifle with the Carbine Rear Sight. An 1868 Italian action that I finished from the rough milled state, filed on the hammer a bit to make it look like a 74 hammer, then had the action metaloyed after polishing. Thus, the colour.



--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras: Print Post   Remind Me!   Notify Moderator  
ducmarc
.400 member


Reged: 14/07/14
Posts: 1207
Loc: fla
Re: #3 remington hepburn [Re: DarylS]
      #261459 - 02/03/15 05:10 AM

i like it> can"t wait for mine i"ve been reading about black powder loading and brought out my navy arms rolling block in forty five seventy< sorry my caps won"t unlock for some reason> waiting for the weather to clear at the same time that i have time to go to the range>

--------------------
'killed by death' Lemmy.. ' boil the dog ' Elvis Manywounds "my best friend is my magnum forty four" hank willams the third.

Post Extras: Print Post   Remind Me!   Notify Moderator  
ducmarc
.400 member


Reged: 14/07/14
Posts: 1207
Loc: fla
Re: #3 remington hepburn [Re: ducmarc]
      #261460 - 02/03/15 05:17 AM

i"m on the hunt for a period correct looking ladder type sight plan on hunting with it this fall for whitetail and a black bear if i"m lucky>

--------------------
'killed by death' Lemmy.. ' boil the dog ' Elvis Manywounds "my best friend is my magnum forty four" hank willams the third.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 53 anonymous users are browsing this forum.

Moderator:  Huvius 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 14666

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved