Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: New to me MS 6.5x54 and bullet question

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Pages: 1

mart
.300 member

Reged: 20/01/04
Posts: 107
Loc: Alaska

New to me MS 6.5x54 and bullet question
#243612 - 11/03/14 02:55 PM

I just picked up a 1903 MS 6.5x54 and am excited to get home from the slope in a couple of weeks and get some range time with it. I've also been accumulating bullets and brass for load development. Today I won the auction on some RWS 6.5mm, 154 grain H mantel bullets. I believe these are similar to the partition in construction except that these have a good sized hollow point. Does anyone have any experience with these bullets. I also scored some old 6.5 Lubaloy 160 grain bullets. Might be fun to hunt the old rifle with some vintage bullets. Thanks.

Mart

Post Extras:

eagle27
.400 member

Reged: 24/01/09
Posts: 1165
Loc: Rolleston, Christchurch, New Z...

Re: New to me MS 6.5x54 and bullet question [Re: mart]
#243615 - 11/03/14 06:02 PM

The H-Mantle bullet seemed to be well liked by those I knew who used them. Two of my German friends used them out here in NZ on red deer, chamois and tahr and they performed well. They are actually closer to a Corelok bullet than a Nosler Partition as can be seen in the sectioned bullet in this photo. There were copper capped and plain lead soft nose varieties that I saw used. Didn't know of hollow points.

Post Extras:

Viking338
.333 member

Reged: 11/08/11
Posts: 480
Loc: Queensland Australia

Re: New to me MS 6.5x54 and bullet question [Re: eagle27]
#243622 - 11/03/14 11:16 PM

Few I know tried them said they were ok, along with the Cone Points, Tig's and Tug's. Always seemed over priced here in Oz, the technology was sound "for it's day" and still work (Nosler Partitions still have a huge following) just have been passed I think buy new innovations. I still think RWS (changed name now I think) projectiles look cool though

Post Extras:

mart
.300 member

Reged: 20/01/04
Posts: 107
Loc: Alaska

Re: New to me MS 6.5x54 and bullet question [Re: Viking338]
#243627 - 12/03/14 02:06 AM

Thanks guys. When I get home from the slope I'll post pictures of the rifle and the bullets. I can't view the pictures of the cross sectioned bullets. They have it pretty tight here on bandwidth and block most of the photo storage sites.

Mart

Post Extras:

xausa
.400 member

Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA

Re: New to me MS 6.5x54 and bullet question [Re: mart]
#243629 - 12/03/14 02:33 AM

Don't forget to check the groove diameter of your Mannlicher Schoenauer. Mine, like many others, measures .268", and that factor limits the number of bullets available.

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 26994
Loc: Beautiful British Columbia, Ca...

Re: New to me MS 6.5x54 and bullet question [Re: xausa]
#243635 - 12/03/14 03:26 AM

Hornady now has a .268", 160gr. RN, by the way, listed as a 'Carcano' bullet.

If you have a .268" groove diameter, this oversized Hornady 160gr. might be 'better' than the .264/.263" commonly available bullets.

If your oversized 6.5 is like my oversized 9.3 - maybe it won't care, accuracy wise about shooting undersized bullets. The 9.3x57 is actually .370" groove to groove and still shoots an inch at 100 meters with .365" through .367" bullets.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

mart
.300 member

Reged: 20/01/04
Posts: 107
Loc: Alaska

Re: New to me MS 6.5x54 and bullet question [Re: DarylS]
#243641 - 12/03/14 04:42 AM

As soon as I get home I'm going to slug the bore. I have several varieties of .264 bullets ordered. If I need to I'll try some .268's. Hopefully it will handle the .264's.

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 26994
Loc: Beautiful British Columbia, Ca...

Re: New to me MS 6.5x54 and bullet question [Re: mart]
#243647 - 12/03/14 07:55 AM

Almost forgot, my last M96 6.5x55 had a .266" groove diameter -- it's bore was brand new, appears unfired, as-did the bolt.
That rifle put 120 Speer, 129 Hornady, 140 Hornady and 160gr. Hornady's into 1 1/2" at 100 meters off bags using the battle sights and Reloader #19 as well as Hodgdon H450 powders.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

Pages: 1

Extra information

0 registered and 209 anonymous users are browsing this forum.

Moderator: CptCurl

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3080

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact