Home | Ezine | Forums | Links | Contact
NitroExpress.com: Project 6.5X54 MS

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
Twopipe
.224 member


Reged: 17/05/13
Posts: 5
Loc: MN
Project 6.5X54 MS
      #231121 - 12/06/13 11:01 PM

I have a gunsmithing friend that asked me a while back what I'd like to make next. I had to think on that but came up with a 6.5X55. That's when he said "How about a 6.5X54 MS?". I had never heard of that round. The reason he suggested that was because he was given a 1903 action and he said he'd give it to me. When I first saw it I was amazed at how smooth it was considering the condition it's in. There was quite a bit of rust and pitting but all cosmetic. It is physically sound. We just installed a barrel and test fired it a couple days ago and it tested out just fine.

My plan is to give it a parkerized finish after all the fitting is done. I have found a wild cherry tree that should produce a stock blank with some good figure to make the stock from.

My main reason for this post is to see if anyone on here can shed some light as to when this action was made. The serial numbers do not match on anything that I could see. The bolt knob is round and solid, not hollow. I will try to post some pictures.

This is the serial number on the right side near the front of the action.


This is on the bottom of the action just behind the recoil lug.

Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 9034
Loc: There's a lighthouse in the mi...
Re: Project 6.5X54 MS [Re: Twopipe]
      #231133 - 13/06/13 03:54 AM

I would say a M 1903 greek model made in 1906

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras: Print Post   Remind Me!   Notify Moderator  
2152hq
.300 member


Reged: 20/05/12
Posts: 126
Loc: USA
Re: Project 6.5X54 MS [Re: lancaster]
      #231139 - 13/06/13 04:08 PM

Good action to build on. Many custom rifles were built on the Greek Military actions by the British arms makers.
The Model is 1903. ( I was told the (prefix) 'Y' in the Greek language is the first letter in the word meaning 'Model',,that would make sense, but it's only what I was told.)
Made on contract for the Greek Military.
Made at Steyr Works in Austria in 1906.
Part of the first contract for Military rifles and carbines for the Greek Govt.
Contract ran 1903 to 1913. Each production year marked on the left side rail along w/ 'Steyr'
Second contract started 1914 w/small changes to the rifle and carbine. Actions marked '(19)03/14'
Post WW1 some rifles were contracted by Breda (Italy) and are so marked on the ring. Same action as the 03/14 but the Steyr marked actions bring a better premium on a sporter.

IIRC the rifles had straight extended bolt handles and the carbines had the turned down handles.
I may be wrong on the latter and it's just been turned down later by someone that sportered it already.

I have a Geo. Gibbs rifle built on a Steyr Greek 1907(?) action and bbl. Very nice sporter in 256 Gibbs Magnum.

Good luck w/your project.

I'd do a bit of polishing to the action and give it a nice rust blue finish when done.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Igorrock
.400 member


Reged: 01/03/07
Posts: 1649
Loc: Finland
Re: Project 6.5X54 MS [Re: 2152hq]
      #231179 - 14/06/13 08:19 PM

Quote:

I'd do a bit of polishing to the action and give it a nice rust blue finish when done.


I second that !

--------------------
http://promaakari.wordpress.com/

Post Extras: Print Post   Remind Me!   Notify Moderator  
Mike_Bailey
.400 member


Reged: 26/02/07
Posts: 2289
Loc: GB
Re: Project 6.5X54 MS [Re: Igorrock]
      #231180 - 14/06/13 08:28 PM

see here, pistol grip too sharp for my taste but I should have specified
best
Mike

http://s222.photobucket.com/user/mlb6363...556515822309898

Post Extras: Print Post   Remind Me!   Notify Moderator  
Twopipe
.224 member


Reged: 17/05/13
Posts: 5
Loc: MN
Re: Project 6.5X54 MS [Re: Mike_Bailey]
      #231193 - 15/06/13 06:13 AM

Mike,
That is absolutely gorgeous!! I look at your work and think of how much I could learn from someone like you! The pitting on my action is fairly deep in spots and I think I'd take too much metal to polish it like yours. I do believe I can get it better than it is though. People are suggesting rust blueing but this is going to be a carry all day, in all types of weather game killing rifle and I've always liked the looks of a parkerized weapon and that type of finish is durable and rust resistant.
Again Mike, your work is exquisite!!

Post Extras: Print Post   Remind Me!   Notify Moderator  
Twopipe
.224 member


Reged: 17/05/13
Posts: 5
Loc: MN
Re: Project 6.5X54 MS [Re: Twopipe]
      #245817 - 16/04/14 04:19 AM

Here is how it ended up. The stock is made of cherry. To mount the scope I TIG welded a Picatinny rail to the barrel and put a long eye relief Scout scope on it. It has a fold down rear sight that is dovetailed into the rail.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3591
Loc: Darwin, Top End of Australia
Re: Project 6.5X54 MS [Re: Twopipe]
      #245933 - 17/04/14 11:09 AM

Quote:

TIG welded a Picatinny rail to the barrel



Wow! Didn't see that coming.....

Post Extras: Print Post   Remind Me!   Notify Moderator  
Sarg
.400 member


Reged: 20/01/07
Posts: 1365
Loc: Nil
Re: Project 6.5X54 MS [Re: Marrakai]
      #245940 - 17/04/14 12:37 PM

LoL LoL ! No that was a surprise !

One way to get a scope on the Bugger !

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 228 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4541

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved