Home | Ezine | Forums | Links | Contact
NitroExpress.com: Lee Enfield No 1 Mk 1*** Sporter - Need Parts

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Lee Speed Forum & Archive

Pages: 1
GeezerD
.224 member


Reged: 14/02/13
Posts: 48
Loc: Michigan , U.S.A.
Lee Enfield No 1 Mk 1*** Sporter - Need Parts
      #229960 - 12/05/13 10:19 AM

I am in the process of refurbishing a Lee Enfield No 1 MK 1 sporter. It has a Watkins Speed rear sight that I won't be using, and I also have an extra magazine cutoff w/screw and a couple of the sheet metal ramp covers for the issue front sight. I need a magazine to convert to 5rd and the charger guide that mounts on the bolthead. Also trigger guard screws and safety spring screw without buggered heads. ------------------ GeezerD

Post Extras: Print Post   Remind Me!   Notify Moderator  
Nailcreek
.300 member


Reged: 13/08/08
Posts: 150
Loc: Saukville, WI, USA
Re: Lee Enfield No 1 Mk 1*** Sporter - Need Parts [Re: GeezerD]
      #229962 - 12/05/13 01:06 PM

Make sure you post pictures as the project progresses.

--------------------
Veni, Vedici, Veggie ... I came, I saw, I had a salad.


Post Extras: Print Post   Remind Me!   Notify Moderator  
greenshoots
.300 member


Reged: 23/05/08
Posts: 204
Loc: uk
Re: Lee Enfield No 1 Mk 1*** Sporter - Need Parts [Re: Nailcreek]
      #229968 - 12/05/13 06:46 PM


try scott he did some good work for me

http://www.customscrewsandmore.com/PaymentandShippingOptions.html


greenshoots


Post Extras: Print Post   Remind Me!   Notify Moderator  
rgg_7
.275 member


Reged: 22/10/07
Posts: 56
Loc: Canada
Re: Lee Enfield No 1 Mk 1*** Sporter - Need Parts [Re: greenshoots]
      #229975 - 12/05/13 10:02 PM

PM sent I should be able to help you on a couple things on your list Ron(Canada)

Post Extras: Print Post   Remind Me!   Notify Moderator  
GeezerD
.224 member


Reged: 14/02/13
Posts: 48
Loc: Michigan , U.S.A.
Re: Lee Enfield No 1 Mk 1*** Sporter - Need Parts [Re: rgg_7]
      #229983 - 13/05/13 02:06 AM

I think I am going to use a Mauser tangent rear sight similar to the G33/40 sight and once I find a load it likes, I will regulate and mark it in 50yd increments from 50 to 300yds using the issue front sight. I am not trying to duplicate any particular Enfield sporting rifle, plus it's nothing that can't be undone. I will post some pictures as I get a little further along on the project. -------------- GeezerD

Post Extras: Print Post   Remind Me!   Notify Moderator  
GeezerD
.224 member


Reged: 14/02/13
Posts: 48
Loc: Michigan , U.S.A.
Re: Lee Enfield No 1 Mk 1*** Sporter - Need Parts [Re: GeezerD]
      #230742 - 01/06/13 07:01 AM

I have found a sight that will work out much better than the mauser tangent sight. I found a Martini Cadet Rear sight in excellent condition. It is graduated to 600yd with windage adjustment.
I am sure the calibration is different but it should work fine. -------------- GeezerD


Post Extras: Print Post   Remind Me!   Notify Moderator  
Nailcreek
.300 member


Reged: 13/08/08
Posts: 150
Loc: Saukville, WI, USA
Re: Lee Enfield No 1 Mk 1*** Sporter - Need Parts [Re: GeezerD]
      #230777 - 02/06/13 01:22 PM

When do you think you can share some pictures?

--------------------
Veni, Vedici, Veggie ... I came, I saw, I had a salad.


Post Extras: Print Post   Remind Me!   Notify Moderator  
GeezerD
.224 member


Reged: 14/02/13
Posts: 48
Loc: Michigan , U.S.A.
Re: Lee Enfield No 1 Mk 1*** Sporter - Need Parts [Re: Nailcreek]
      #230815 - 03/06/13 06:16 AM

About the only thing I have finished so far is the stock work. I added an ebony nose cap after shortening the forend about 4 inches and worked it down to an appropriate profile. The butt stock required quite a bit of work as a result of being oil saturated. But after leeching as much oil out of the wood as possible and using acraglas to reinforce the softened areas it has become quite presentable. I was able to steam out most of the dents although a couple had to be filled because the wood fibers were broken.

I am currently trying to obtain the nessesary parts to finish the project. I have a couple different sight options - A BSA Martini Cadet rear sight or a single fixed, two folding express rear sight. I have some replacement screws for the ones with damaged heads. A new firing pin is on the way and I located a bolt head charger guide in the UK,but it is a bit pricy.

I would still like to find a couple of Mk 3 magazines in VG to Exc condition.

And I still haven't figured out how to post photos to this site. ---------------GeezerD


Post Extras: Print Post   Remind Me!   Notify Moderator  
BigEyeBob
.275 member


Reged: 12/05/16
Posts: 60
Loc: Katherine Northern Territory ...
Re: Lee Enfield No 1 Mk 1*** Sporter - Need Parts [Re: GeezerD]
      #291853 - 12/12/16 10:06 PM

I bought a couple of complete Martini Henry rear sights off ebay ,they fit the mk3 barrels perfectly ,they have a fixed standing leaf and a ladder thats is graduated to 1000 yds if I recall correctly .Hope fully they are graduated for the 303 cartridge sighting when the converted them to 303 from 557/450
I plan on using them on my lee enfield projects to replace the military rear sights.
I am currently in the process of making a 5 shot magazine from a standard 10 round no 1 MK3 magazine ,the same as the magazine used in the no4 pattern BSA sporting rifle chambered in 375 x 2 1/2" from the 1912 BSA catalogue .Its a simple conversion if you have some metal working skills and some hand tools.BSA did not make a special magazine for this cartridge ,they just used a slightly modified standard 10 round magazine.

Bob.aka Kev

--------------------
I'm not young enough to know every thing .


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 5 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4095

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved