Home | Ezine | Forums | Links | Contact
NitroExpress.com: M1950 possible to chance caliber?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
Bonde
.333 member


Reged: 16/02/06
Posts: 278
Loc: Norway
M1950 possible to chance caliber?
      #228419 - 09/04/13 06:24 PM

I've just aquired a M-S 1950 in .30-06, and would like to have a Claw-mount fitted and the barrel changed from .30-06 to 6,5x65RWS.

Can the caliber be changed withouth alteration to the magazine?

Would it likely feed slender pionted bullets well?

Would appreciate to hear from someone who has done this or similar.

--------------------
------------------------------------------------------
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill

Edited by bonde (09/04/13 07:35 PM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
Caprivi
.375 member


Reged: 30/09/08
Posts: 811
Loc: America's Serengeti, Buffalo W...
Re: M1950 possible to chance caliber? [Re: Bonde]
      #228430 - 10/04/13 12:43 AM

Years ago I rebarreled a 1903 to .35rem. I stayed with a similar case size but with the obviously larger neck diameter. I machined the spool to accomidate and it functioned well.

On your proposal, the 6.5RWS should ride the spool well, with the neck area being somewhat smaller, may well work without any alteration.

I have not measured a 6.5x65mm case so can only go by spec sheets. It is stated as being larger in diameter at the base....???.....Possibly, possibly not.

I think I would procure some ammunition and try it thru the spool. looking at the specs, other than the .003" larger base, it should chamber fine. The body is longer, but the shoulder is smaller.


Sounds like a very worthy project.









--------------------
To live life as it is handed to me from God

Edited by CptCurl (06/06/13 09:52 PM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
xausa
.400 member


Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
Re: M1950 possible to chance caliber? [Re: Caprivi]
      #228440 - 10/04/13 02:55 AM

I had a M1950 carbine in caliber .270 Winchester rebored to 9.3X62 and the magazine altered with no problems. As mentioned above, with a smaller bullet and case neck, the 6.5X65 RWS should feed with no further alterations. I hope your M1950 is a rifle, however. I would think a carbine in 6.5X65 would be truly a pain in the ear to shoot.

Post Extras: Print Post   Remind Me!   Notify Moderator  
kuduae
.400 member


Reged: 13/01/10
Posts: 1775
Loc: middle of Germany
Re: M1950 possible to chance caliber? [Re: xausa]
      #228441 - 10/04/13 03:41 AM

CAUTION here! Rebarreling a pre-war Mannlicher-Schoenauer is no big problem, as the cams which push back the locking lugs on opening to achieve initial extraction were machined inside the receiver ring. Post-war models, at least the 1952, had these cams machined as part of the barrel! This simplified production at the factory, where special tooling and fixtures were available, but it is nearly impossible for a normal gunsmith to get the barrel threads and those camming surfaces correctly shaped and aligned. I know a very good master gunsmith who told me he did it once, but would rather close shop than do it again.
Reboring to a larger caliber is not such a big problem, despite the necessary alterations to the magazine. So before damaging the original barrel, have it unscrewed carefully to check the arrangement of thos cams on a 1950.
BTW magazine aleration may be necessary for the change to 6.5x65 too, as the base to shoulder dimension, 2.12", is longer than that of the .30-06, 1.948". At least the guide ring as to be altered, and maybe even the rotor. So before starting the rebarreling get 5 6.5x65 cartridges and try if they fit into the magazine.

--------------------
German foresters: We like sustainability! For merely 300 years by 2013.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Bonde
.333 member


Reged: 16/02/06
Posts: 278
Loc: Norway
Re: M1950 possible to chance caliber? [Re: kuduae]
      #228464 - 10/04/13 07:33 AM

Thanks a lot for advice given!

It is a 1950 rifle model, but made after 1952 by the looks of it..

The .30-06 barrel is fine, so might leave as is till I wear out the barrel..
Wore out my last .30-06, before rebarreling it to 6,5x55sm.

A 6,5x65RWS in anything shorter than a 65cm barrel is too loud for me..

--------------------
------------------------------------------------------
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
1 registered and 31 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4646

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved