Home | Ezine | Forums | Links | Contact
NitroExpress.com: Help with a Beretta GR-4 SXS

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Shotguns

Pages: 1
DonT
.224 member


Reged: 16/05/12
Posts: 33
Loc: Minnesota
Help with a Beretta GR-4 SXS
      #225988 - 26/02/13 09:07 AM

Good Day,

I recently picked up a Beretta GR-4 SXS 12ga.
The prior owner had the barrels shortened slightly to about 26 1/2" and Briley VX choke tubes installed. I am assuming at the same time they had the ejectors deactivated.

Unfortunately this last item is becoming a pain in the neck as the springs are still in place and I have to work against those to reinstall the forend. This makes for a real pain every time the forend is removed.

I would like to activate the ejectors but when I bought the gun the dealer said he couldn't find the parts to do that, personally I don't know that they knew how to fix it. I know with a lot of SXS it is just a matter of turning a screw or moving a clip but I have been unable to find anything on the Net explaining what to do.

I am looking for someone that is familar with these guns and can tell me what to look for or what to do to reactivate the ejectors.

If you can offer some help could you please drop me a PM...

Thanks in Advance...
DonT


Post Extras: Print Post   Remind Me!   Notify Moderator  
500Nitro
.450 member


Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia
Re: Help with a Beretta GR-4 SXS [Re: DonT]
      #225991 - 26/02/13 09:57 AM


Call Beretta in the US, I am sure they have
gunsmiths who know and if not, they can
always call the factory.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 12 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 1506

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved