Home | Ezine | Forums | Links | Contact
NitroExpress.com: When would you cross bolt a big bore?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Pages: 1
HDU
.224 member


Reged: 02/12/04
Posts: 12
Loc: Sydney Australia
When would you cross bolt a big bore?
      #22224 - 14/12/04 03:42 PM

Is it worth doing for a .300 medium bore ina timber stock? What about a .458 BRNO? If not, when do you need to put another recoil lug or a cross bolt or 2 in?

Post Extras: Print Post   Remind Me!   Notify Moderator  
500Nitro
.450 member


Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia
Re: When would you cross bolt a big bore? [Re: HDU]
      #22243 - 15/12/04 07:52 AM


HDU

From a personal opinion from owning a number of big bores 375 and up
and based on my stock makers thoughts,

300 Win Mag etc etc 1 Cross Bolt
338 etc at least 1 cross bolt
375 and up 2 cross bolts, ESPECIALLY 458 and above.

It also depends on how good the stock job / bedding is.

A badly inletted stock will crack within 5 - 10 shots.

Adding another cross bolt is a lot less expensive than replacing a stock
if it breaks. I have seen people try to save money by skimping on these
things and it ends up costing them twice as much.

Hope this helps

500 Nitro


Post Extras: Print Post   Remind Me!   Notify Moderator  
4seventy
Sponsor


Reged: 07/05/03
Posts: 2210
Loc: Queensland Australia
Re: When would you cross bolt a big bore? [Re: HDU]
      #22249 - 15/12/04 09:37 AM

HDU,
For your 458 Brno, you would be far better off putting time into correctly bedding the two original recoil lugs than fitting a crossbolt.
Also you need to create some clearance behind the rear tang.
If crossbolts are not fitted and bedded correctly, they do little toward preventing cracking/splitting the stock.

I much prefer "hidden" crossbolting on big bolt guns.


Post Extras: Print Post   Remind Me!   Notify Moderator  
HDU
.224 member


Reged: 02/12/04
Posts: 12
Loc: Sydney Australia
Re: When would you cross bolt a big bore? [Re: 4seventy]
      #22267 - 15/12/04 09:05 PM

Thank you very much.

Any hints on which action screws should be tightened up in which order? How tight should they be?

Thanks agains...


Post Extras: Print Post   Remind Me!   Notify Moderator  
atkinson6
.375 member


Reged: 26/01/04
Posts: 678
Loc: Idaho
Re: When would you cross bolt a big bore? [Re: HDU]
      #22630 - 25/12/04 09:01 AM

I see no reason to cross bolt any caliber less than the 416 Remington, but you could cross bolt a 375 if you wish...

A good glass bedding job will do a better job than cross bolts in any caliber, but I still use them with a 416 up...Definately glass and cross bolt and use two recoil lugs on any gun larger than 458 Win...

My 9.3x62 and my 338 Win have not been glassed or cross bolted and I have been shooting them for many years, but they are custom rifles with proper bedding in good dry cured Turkish Walnut...

Good wood can make all the difference in the world..


Post Extras: Print Post   Remind Me!   Notify Moderator  
vapodog
.300 member


Reged: 28/12/04
Posts: 237
Loc: Nebraska USA
Re: When would you cross bolt a big bore? [Re: HDU]
      #22772 - 29/12/04 04:39 AM

The comments about glass bedding are so true.....However the appearance of good cross bolts that are milled in(as opposed to merely drilled) is "cool" and I install them on all my guns with bores 338 cal and bigger.

Are they needed?.....probably not.....but they sure don't hurt either.

--------------------


Post Extras: Print Post   Remind Me!   Notify Moderator  
butchloc
.300 member


Reged: 18/12/04
Posts: 230
Loc: faribault mn
Re: When would you cross bolt a big bore? [Re: HDU]
      #22785 - 29/12/04 06:54 AM

I had don allen build be a matched pair of dakota's a bit ago & he recommended cross bolting anything 375 and larger. I'll bow to his opinion

Post Extras: Print Post   Remind Me!   Notify Moderator  
Siskiyous6
.275 member


Reged: 21/11/04
Posts: 69
Loc: Del Norte COunty, CA
Re: When would you cross bolt a big bore? [Re: 500Nitro]
      #23730 - 08/01/05 04:42 PM

If a stock splits at 5 shots take demand that the manufacturer replace it.

--------------------
Pass it on!


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
1 registered and 201 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2436

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved