Home | Ezine | Forums | Links | Contact
NitroExpress.com: 20 mm Manton muzzle loader

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Muzzleloaders & Blackpowder

Pages: 1
lancaster
.470 member


Reged: 06/05/08
Posts: 8664
Loc: There's a lighthouse in the mi...
20 mm Manton muzzle loader
      #221180 - 09/12/12 01:42 AM

a 20 mm caliber muzzle loader of Manton/London
seller claims good accuracy with 90 grains BP at 100 meter
http://www.egun.de/market/item.php?id=4155991













--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
DoubleD
.400 member


Reged: 23/11/03
Posts: 2386
Loc: Retired in Oklahoma
Re: 20 mm Manton muzzle loader [Re: lancaster]
      #221182 - 09/12/12 02:06 AM

I doubt Manton made anything in 20mm

--------------------
DD, Ret.


Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 8664
Loc: There's a lighthouse in the mi...
Re: 20 mm Manton muzzle loader [Re: DoubleD]
      #221184 - 09/12/12 02:44 AM

of course it was a 10 bore rifle then

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
DoubleD
.400 member


Reged: 23/11/03
Posts: 2386
Loc: Retired in Oklahoma
Re: 20 mm Manton muzzle loader [Re: lancaster]
      #221188 - 09/12/12 03:26 AM

Metric and inch can be mathematically converted but they are not interchangeable. A 10 bore slug is different that 20mm bullet.

10 bore is .775 or 19.68 mm 20mm is .787.

Could this really be a musket and not a bore gun? A .75?

It also has been restocked, and poorly-look at the fit of the lock plate to bolster and barrel; and fit of hooked breech to barrel.

--------------------
DD, Ret.


Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 8664
Loc: There's a lighthouse in the mi...
Re: 20 mm Manton muzzle loader [Re: DoubleD]
      #221189 - 09/12/12 03:50 AM

seller says "zirka 20mm" what means cirka or around 20 mm and tells me he did not realy take care for the correct diameter. must have been a 10 bore in the old days and I dare to say that it would not be easy to find two 10 bore's with the exact same diamter.


and yes its a rifled barrel

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylSModerator
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: 20 mm Manton muzzle loader [Re: DoubleD]
      #221194 - 09/12/12 04:49 AM

Quote:


It also has been restocked, and poorly-look at the fit of the lock plate to bolster and barrel; and fit of hooked breech to barrel.




Not well done is right.
The drip rail fit to lock plate is very poor, as is the breech plug to tang fit as you noted.
A rifle barrel I'm sure - and the calibre might have been enlarged somewhere along with line, freshed or re-cut larger.
The lock and sotck doesn't seem to fit the size well. I've seen pictures (none closeup & personal, unfortunately) of Sporting Rifles up to 6 bore - .91 cal, where the barrel size was not evident, the gun's actual geometry being perfect.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 2 anonymous users are browsing this forum.

Moderator:  DarylS 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3100

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved