Home | Ezine | Forums | Links | Contact
NitroExpress.com: Amberg 1918/1919 sporter

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1
chapmen
.300 member


Reged: 26/02/10
Posts: 234
Loc: Middle of germany
Amberg 1918/1919 sporter
      #214906 - 18/08/12 10:22 PM

Just restoring an rare "Gewehrfabrik (riflefactory ) Amberg 98 sporter.....
The riflefactory made between nov. 1918 till end of 1919 very few sporter or Pirschbüchsen for the civilian market, just to keep the employes in work. Also there excisting very few from riflefactory Danzig and Erfurt.
Stock is the prewar type with large sideplates, stamped with Amberg logo, also the right side of the system is marked with Gew.F Amberg. Chambered for 8x57 Is ,almost all parts are modified from military parts,trigger is the french type . No civilian proof marks, only the military proofstamp- bavarian lion.
Mounted with an suhler einhak , not known by now if this was made in fabric or later. Scope is an Goerz 3x sniper type with an other rifle sn. Mounting is similar to the bavarian sniper rifles before 1918.
Highest SN from Amberg i know is 9xx.
















more pics will follow by interest.....

--------------------
some fine old guns from germany :
www.jagdwaffensammler.de

Edited by CptCurl (02/12/12 01:15 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Igorrock
.400 member


Reged: 01/03/07
Posts: 1649
Loc: Finland
Re: Amberg 1918/1919 sporter [Re: chapmen]
      #214907 - 19/08/12 12:07 AM

Would you please send borh side fotos of the whole rifle ? The trigger construction looks very interesting.

--------------------
http://promaakari.wordpress.com/


Post Extras: Print Post   Remind Me!   Notify Moderator  
chapmen
.300 member


Reged: 26/02/10
Posts: 234
Loc: Middle of germany
Re: Amberg 1918/1919 sporter [Re: Igorrock]
      #214908 - 19/08/12 01:26 AM

I am just working on the stock, when i finished i give more pics.
The trigger is called in germany "Französicher Rückstecher", i dont know to translate this corect.
Its an kind of an single set trigger, if you push the trigger forward it sets.
Usually this kind of trigger was used in combination guns.

Typical for bolt action at this time in germany was the double set trigger.

--------------------
some fine old guns from germany :
www.jagdwaffensammler.de


Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 9025
Loc: There's a lighthouse in the mi...
Re: Amberg 1918/1919 sporter [Re: chapmen]
      #214909 - 19/08/12 02:05 AM

forward set trigger or rear set trigger

interesting specialty, I suspect in 8x57 or later reamed out to 8x60?

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
chapmen
.300 member


Reged: 26/02/10
Posts: 234
Loc: Middle of germany
Re: Amberg 1918/1919 sporter [Re: lancaster]
      #214916 - 19/08/12 02:53 AM

Ok, thanks - it is an forward set trigger.
Chambering is original, 8x57 IS.









--------------------
some fine old guns from germany :
www.jagdwaffensammler.de

Edited by CptCurl (02/12/12 01:16 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 9025
Loc: There's a lighthouse in the mi...
Re: Amberg 1918/1919 sporter [Re: chapmen]
      #214973 - 19/08/12 10:25 PM

the good thing about this sporter is you could see it was made in amberg(bavaria) at 1000 meter. I dont believe Erfurt or Danzig made the stock with the bavarian checkpiece but have the common german checkpiece.
without the amberg logo on the stock one could believe it's a later gunmaker work build of an Amberg made Gewehr 98?

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
chapmen
.300 member


Reged: 26/02/10
Posts: 234
Loc: Middle of germany
Re: Amberg 1918/1919 sporter [Re: lancaster]
      #214978 - 19/08/12 11:55 PM

The Erfurt and Danzig stocks have the "normal" checkpiece.
The interesting point is that it is definetely not an later conversion, this are the only rifles that ever made in german state firms for the comercial market, also it is definetely dated between 1918-1919. (All state factorys where closed at end of 1919)
You must remember that it was forbidden in 1918 to own military rifles for civilians, so the stocks and the systems were clearly signed to get no problem with this. Also this rifle is chambered in original 8x57 IS, treaty of versaille was later and this one survived to be chambered in 8x60.
There where no extras that could be orderd, only this type, no other chambering, no other stock, no engraving.

--------------------
some fine old guns from germany :
www.jagdwaffensammler.de


Post Extras: Print Post   Remind Me!   Notify Moderator  
MarkPoley
.224 member


Reged: 22/05/12
Posts: 35
Loc: Yellville, Arkansas
Re: Amberg 1918/1919 sporter [Re: chapmen]
      #215043 - 20/08/12 09:24 AM

Very nice rifle. Looks like the stock has a lot of drop at the heel.

--------------------
Acts 4: 12-13 ; Rom. 8:29


Post Extras: Print Post   Remind Me!   Notify Moderator  
vegard_dino
.333 member


Reged: 05/03/09
Posts: 262
Loc: From Norway, but living in Swi...
Re: Amberg 1918/1919 sporter [Re: MarkPoley]
      #216358 - 09/09/12 01:24 AM



Thanks for showing.
A very nice rifle.

Have you taken it to the range?

--------------------
Cheers all, Vegard_dino


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 16 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 9093

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved