Home | Ezine | Forums | Links | Contact
NitroExpress.com: Mauser 98 action screws, how tight?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
Spud303
.224 member


Reged: 25/05/11
Posts: 48
Loc: ACT, Australia
Mauser 98 action screws, how tight?
      #212222 - 07/07/12 06:40 PM

I've had my Oberndorf Type B No.80 sporter apart to clean out the barrel channel in the stock. Is there any particular order for tightening the action screws back up. Front one first or rear first? How tight? Thanks
Spud

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26535
Loc: Beautiful British Columbia, Ca...
Re: Mauser 98 action screws, how tight? [Re: Spud303]
      #212236 - 07/07/12 11:45 PM

The accuracy shooters I sent a lot of time with, years ago, insisted that you put the muzzle down on a pad pushing straight down on the stock as you tighten the front screw first, then the rear.

The front needs to be tighter than the rear, however there can be NO springing of the action when tighening the rear screw. I do not have the pounds of torque numbers, but 35 pounds sounds familiar.

Proper bedding stops the springing that normally happens with Mausers that are not bedded for the first 1/2" to 1" of the chamber area, ahead of the lug.

Never glass bed on a tapered section of the barrel ie: in front of the chamber. Some rifles will still shoot quite well when bed this way, but many will walk their shots as the barrel heats if the taper is bedded. It is definite no/no for match rifles that must maintain accuracy for 5 to 20 or more shots.

I was also taught to relieve the action contact from the sides, front and bottom of the lug. That's important.

These 'accuracy' tips work and can help make a Mauser shoot well enough to think it's a M700 Rem. varmint rifle , but with superior extraction, feeding and gas handling, of course.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras: Print Post   Remind Me!   Notify Moderator  
Spud303
.224 member


Reged: 25/05/11
Posts: 48
Loc: ACT, Australia
Re: Mauser 98 action screws, how tight? [Re: DarylS]
      #212311 - 08/07/12 07:44 PM

Thanks Daryl. I'll give that a go.
Spud

Post Extras: Print Post   Remind Me!   Notify Moderator  
JohnTheGreek
.300 member


Reged: 16/11/04
Posts: 167
Loc: Cairo, Egypt
Re: Mauser 98 action screws, how tight? [Re: Spud303]
      #213390 - 24/07/12 08:26 PM

Quote:

How tight? Thanks



My rule on tightening all screws is "tighten until threads are stripped and then back off 1/4 turn". LOL.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 49 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3587

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved