Home | Ezine | Forums | Links | Contact
NitroExpress.com: Von Lengerke & Antione M-1903

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Pages: 1
twalker
.224 member


Reged: 23/07/10
Posts: 31
Loc: Southern California, USA
Von Lengerke & Antione M-1903
      #203525 - 24/02/12 08:39 AM

I've got a well used full stock rifle (23 inch barrel) imported through Von Lengerke & Antoine, Chicago in 1920. Is there still some demand for the rifle length 6.5x54?





I've been thinking of letting it go, but after each afternoon at the range it goes back into the safe.

Edited by CptCurl (16/03/12 11:17 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
twalker
.224 member


Reged: 23/07/10
Posts: 31
Loc: Southern California, USA
Re: Von Lengerke & Antione M-1903 [Re: twalker]
      #203630 - 25/02/12 04:25 AM

Maybe I should rephrase this one...

Does anyone else have experience with the rifle vs carbine model 1903 and is there a preference for one over the other?

As always, thanks for any insights you may have.

Terry


Post Extras: Print Post   Remind Me!   Notify Moderator  
A10ACN
.300 member


Reged: 30/01/05
Posts: 198
Loc: USA
Re: Von Lengerke & Antione M-1903 [Re: twalker]
      #203693 - 25/02/12 06:53 PM

The full stock rifles are not common. Most rifles (23") are half stock. I've seen one or two others over the years. I have seen no increased interest in the rifles with the full stocks. Most prefer the full stock carbines as they are light, handy and pleasing to the eye.

Post Extras: Print Post   Remind Me!   Notify Moderator  
kuduae
.400 member


Reged: 13/01/10
Posts: 1775
Loc: middle of Germany
Re: Von Lengerke & Antione M-1903 [Re: A10ACN]
      #203959 - 28/02/12 05:13 AM

Quote:

Does anyone else have experience with the rifle vs carbine model 1903 and is there a preference for one over the other?



I have both a M1903 carbine with 18" barrel and a half-stocked rifle by Gibbs with a 22" barrel. The difference is in the ballistics: The 10.3g = 159grs RWS standard factory load is listed with a MV of 670 m/sec = 2198 fps from a 45cm = 18" barrel. This velocity makes it barely illegal for use on any hoofed game except roe deer, as a minimum energy of 2000 joule at 100 m is required. From my 18" barrel it does slightly better, averaging 680 = 2230 fps over my chrony, but still illegal. From the 22" barrel of my Gibbs it clocks at 705 m/s = 2312 fps, making it legal. BTW my handloads with the 160gr Hornady do 735 m/s = 2400fps from the 22" barrel, duplicating the prewar #9 RWS load.
These results conform quite well to the old table "velocity vs. barrel length, 6.5mm", page 225 of the 1940 RWS handbook.


Post Extras: Print Post   Remind Me!   Notify Moderator  
twalker
.224 member


Reged: 23/07/10
Posts: 31
Loc: Southern California, USA
Re: Von Lengerke & Antione M-1903 [Re: kuduae]
      #203970 - 28/02/12 09:48 AM

Thanks Kuduae & A10ACN. This one is so trim and light already it's hard to imagine how the carbine would feel. Wouldn't mind finding out though.

Take care,

tw


Post Extras: Print Post   Remind Me!   Notify Moderator  
HistoricBore
.300 member


Reged: 28/09/11
Posts: 224
Loc: United Kingdom
Re: Von Lengerke & Antione M-1903 [Re: twalker]
      #205182 - 15/03/12 04:38 AM

I can see why it keeps coming home with you. I have a carbine, which is indeed very light and handy, and accurate as well. I have never seen a full-stocked rifle. All the British retailers fitted conventional shorter stocks, occasionally as take-downs. Why don't you telephone one of the auction houses like Julia's and see what they say?

I usually shoot the 140 grain bullets but they do not feed as smoothly as the 160 grs. I have been trying to find some 160 gr. solids, but without luck so far. It is rumoured that they exist in Austria - any ideas??


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39249
Loc: Barossa Valley, South Australi...
Re: Von Lengerke & Antione M-1903 [Re: twalker]
      #205211 - 15/03/12 03:38 PM

Quote:

I've got a well used full stock rifle (23 inch barrel) imported through Von Lengerke & Antoine, Chicago in 1920. Is there still some demand for the rifle length 6.5x54?





A simple answer. Yes. There is demand for the quintessential Mannlicher Schoenauer, the full wood carbine.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26516
Loc: Beautiful British Columbia, Ca...
Re: Von Lengerke & Antione M-1903 [Re: NitroX]
      #205236 - 16/03/12 02:24 AM

Now THAT is a rifle I'd like to own - however it's ownership is not in the cards for me, of that, I'm quite certain.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
tinker
.416 member


Reged: 12/03/05
Posts: 4835
Loc: Nevada
Re: Von Lengerke & Antione M-1903 [Re: DarylS]
      #205238 - 16/03/12 02:51 AM

That's a really nice rifle.
I would love to own it.
Message me if it ever comes for sale.




Cheers
Tinker

--------------------
--Self-Appointed Colonel, DRSS--



"It IS a dangerous game, and so named for a reason, and you can't play from the keyboard. " --Some Old Texan...


Post Extras: Print Post   Remind Me!   Notify Moderator  
twalker
.224 member


Reged: 23/07/10
Posts: 31
Loc: Southern California, USA
Re: Von Lengerke & Antione M-1903 [Re: HistoricBore]
      #205800 - 23/03/12 08:48 AM

Quote:

I usually shoot the 140 grain bullets but they do not feed as smoothly as the 160 grs. I have been trying to find some 160 gr. solids, but without luck so far. It is rumoured that they exist in Austria - any ideas??




These are fairly new from Cutting Edge Bullets:
02/23/2012
New 6.5mm 155gr Dangerous Game Solid Copper bullet
DGSC_G155_BBW_13
6.5mm 155 GR. DGSC G155 BBW#13

.264" diameter 155 grain Dangerous Game Solid Copper hunting bullet designed for Bolt Action Rifles but can be used in double rifles as well. Design incorporates a 4 band configuration for reduced barrel strain. It has the 67% Meplat BBW#13 nose profile which has proven to give the deepest penetration of any bullet tested to date.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 32 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 5453

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved