FATBOY404
.400 member
Reged: 14/11/09
Posts: 1730
Loc: QLD
|
|
Was over at the neighbors yesterday to drop off a set of mounts for his 1022 that he asked me to get for him when I was in Brisbane.
I got a set of alloy ones from the gun show at Redbank for $25.
He said "how much" ? to which I said "you do plenty for me so just have them".
We got talking and he said "when are you going to kill some of these f#cking pigs here as they are out of control and i can't poison yet because the sheep are in the same paddocks" ?.
I said "See you in the morning".
Ended up with 36 pigs until 8.30am but most were just slips.
Got a few photo's but it was pretty hectic.
By fatboy404 at 2012-03-05
By fatboy404 at 2012-03-05
By fatboy404 at 2012-03-05
By fatboy404 at 2012-03-05
By fatboy404 at 2012-03-05
By fatboy404 at 2012-03-05
The 8x68 is hard on these little fella's.
By fatboy404 at 2012-03-05
By fatboy404 at 2012-03-05
Duke" and "George" are working really well off the 4 wheeler with Duke now up to 274 pigs.
By fatboy404 at 2012-03-05
Here is how they "hole up".
By fatboy404 at 2012-03-05
The 8x68 "Tracking system".
By fatboy404 at 2012-03-05
This is what a bullet box should look like !.
By fatboy404 at 2012-03-05
Duke copped one for his trouble.
By fatboy404 at 2012-03-05
--------------------
"WHATEVER BLOWS YOUR HAIR BACK"
|
JeffK
.275 member
Reged: 06/03/11
Posts: 95
Loc: Perth, WA
|
|
Fantastic day out - and I seriously live in the wrong State!
--------------------
Regards, Jeff
|
gryphon
.450 member
Reged: 01/01/03
Posts: 5487
Loc: Sambar ground/Victoria/Austral...
|
|
Good day out alright mate.
--------------------
Get off the chair away from the desk and get out in the bush and enjoy life.
|
Sville
.400 member
Reged: 23/03/10
Posts: 1189
Loc: Sweden
|
|
Quote:
This is what a bullet box should look like !.
By fatboy404 at 2012-03-05
Or "A nice day at the office"...... 
|
NitroX
.700 member
Reged: 25/12/02
Posts: 40645
Loc: Barossa Valley, South Australi...
|
|
I wish I had that result when visiting the neighbours!
Well done.
I see the 8x68S is doing good work again.
--------------------
John aka NitroX
 ...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"
|
old_mate
.224 member
Reged: 07/12/11
Posts: 2
Loc: QLD, Australia
|
|
duke finaly cops one on the chin.
Will you be at the partens place this weekend?
|
FATBOY404
.400 member
Reged: 14/11/09
Posts: 1730
Loc: QLD
|
|
No mate I will have northerly winds so I will be spraying.
You will have to tackle the pigs on your own.
--------------------
"WHATEVER BLOWS YOUR HAIR BACK"
|
Viking338
.333 member
Reged: 11/08/11
Posts: 480
Loc: Queensland Australia
|
|
You do love that 8x68 don't you. Well another day in paradise it seems, I hope there are some left for Easter 
|
FATBOY404
.400 member
Reged: 14/11/09
Posts: 1730
Loc: QLD
|
|
Quote:
You do love that 8x68 don't you. Well another day in paradise it seems, I hope there are some left for Easter
You are supposed to eat fish at easter mate not pork.
If you are lucky I will lend you my bike and "George" and I'm sure you will burn some powder.
The hardest thing for you will be makeing a choice between the 338Fed,338-06,9.3,7x57,7.62x39,308 and the "Boar spear". 
--------------------
"WHATEVER BLOWS YOUR HAIR BACK"
|
Viking338
.333 member
Reged: 11/08/11
Posts: 480
Loc: Queensland Australia
|
|
Ha pork and fish both white meat to me well I will have to do some reloading with those .338 Woodleighs I am sure but I was thinking that the the 9.3 is likely feeling left out  but then the old faithful .308 Finwolf is very handy in the thick stuff now I have worked out how to make those 5 shot mags for it. Ah decisions decisions
|
Ash
.400 member
Reged: 10/05/11
Posts: 1654
Loc: Australia
|
|
Ah when were you there!?
Didnt see you at the show, but i wasnt there for very long (couple hours, just buying some cartridges for the collection).
Good work on the pigs, wish they were that plentiful here (probably are, i dont go out to look hah)
Cheers,
Ash.
--------------------
.
Edited by Ash (08/03/12 08:01 PM)
|
FATBOY404
.400 member
Reged: 14/11/09
Posts: 1730
Loc: QLD
|
|
Quote:
Ah when were you there!?
Didnt see you at the show, but i wasnt there for very long (couple hours, just buying some cartridges for the collection).
Good work on the pigs, wish they were that plentiful here (probably are, i dont go out to look hah)
Cheers,
Ash.
Steve (Viking338) was working at one of the booths and I went to see him.
Was there from 8.30 until 11 am Saturday.
--------------------
"WHATEVER BLOWS YOUR HAIR BACK"
|
Ben
.400 member
Reged: 22/08/08
Posts: 1917
Loc: Northern Territory, Australia
|
|
Good stuff, Neale!
|
DarylS
.700 member
Reged: 10/08/05
Posts: 27690
Loc: Beautiful British Columbia, Ca...
|
|
Good post Neale. Those RWS 8x68 cases are nice, ay.
Since you've probably got lots of brass I was hesitant to mention this, but standard 2.650" or longer magnum brass is useable. Merley turn the belts down to .522" or .523", trim to length and fireform. They form perfectly and function as normal at any pressure level and work properly in 8x68S dies.
--------------------
Daryl
"a gun without hammers is like a Spaniel without ears" King George V
|
AFRO408
.333 member
Reged: 21/01/09
Posts: 312
Loc: Arding NSW
|
|
Way to go Neale!!
Good to see the 8x68 getting a good workout too.
Is that little love bite on Duke's cheek ok?
Cheers
Tony
--------------------
Flinch ? Wot flinch ? Gunsmithing is my PASSION.
|
FATBOY404
.400 member
Reged: 14/11/09
Posts: 1730
Loc: QLD
|
|
Quote:
Good post Neale. Those RWS 8x68 cases are nice, ay.
Since you've probably got lots of brass I was hesitant to mention this, but standard 2.650" or longer magnum brass is useable. Merley turn the belts down to .522" or .523", trim to length and fireform. They form perfectly and function as normal at any pressure level and work properly in 8x68S dies.
Don't think I would have the patiants for that mate but good to know you can do it.
--------------------
"WHATEVER BLOWS YOUR HAIR BACK"
|
FATBOY404
.400 member
Reged: 14/11/09
Posts: 1730
Loc: QLD
|
|
Quote:
Way to go Neale!!
Good to see the 8x68 getting a good workout too.
Is that little love bite on Duke's cheek ok?
Cheers
Tony
Just to show he cares.
Glad you have got an 8x68 reamer as I may need it soon.
--------------------
"WHATEVER BLOWS YOUR HAIR BACK"
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
