Home | Ezine | Forums | Links | Contact
NitroExpress.com: Steyr 6.5x53R - info on this wanted as well

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Pages: 1
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39881
Loc: Barossa Valley, South Australi...
Steyr 6.5x53R - info on this wanted as well
      #196351 - 11/12/11 03:57 AM








Steyr 1911



The barrel is marked 1940.


The rear sight.




Blitzen is excited and smells gun oil and cordite and says "Lets go hunting!"

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 9033
Loc: There's a lighthouse in the mi...
Re: Steyr 6.5x53R - info on this wanted as well [Re: NitroX]
      #196355 - 11/12/11 04:19 AM

must be a dutch military rifle
probably to good and to rare to butcher this for a sporter

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
Igorrock
.400 member


Reged: 01/03/07
Posts: 1649
Loc: Finland
Re: Steyr 6.5x53R - info on this wanted as well [Re: lancaster]
      #196363 - 11/12/11 05:17 AM

Rifle seems to be very similar like this:

http://www.collectie.legermuseum.nl/strategion/strategion/i004800.html



--------------------
http://promaakari.wordpress.com/


Post Extras: Print Post   Remind Me!   Notify Moderator  
GK
.300 member


Reged: 29/10/09
Posts: 161
Loc: Adelaide
Re: Steyr 6.5x53R - info on this wanted as well [Re: Igorrock]
      #196395 - 11/12/11 12:38 PM

The Dutch had more variations of mannlichers than any other country. According to my reference there were at least 13 versions of Dutch carbines and an additional 5 versions for the KNIL (Royal Dutch East Indies Army). If I had to guess its closest to a Karabun M.95 No.4 OM or NM (the differences are stocks and fittings etc.).

However as it does not have a bayonet lug I would gues that this example is more likey to be a KNIL carbine than a Dutch example. The rifle vesions proved too long for the small statured East Indies soldiers so they were issues carbines while the rifles were kept for the European soldiers. The lack of a bayonet lug is because the native soldiers were issued cutlasses for hand to hand fighting and for use as bush knives.

If the bore is good and all parts are matching I would agree with Lancaster and say that its propably too good and original to convert into a sporter. There are heaps of Dutch carbines around that have bad bores and really bad woodwork.

George

Edited by GK (11/12/11 12:39 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39881
Loc: Barossa Valley, South Australi...
Re: Steyr 6.5x53R - info on this wanted as well [Re: GK]
      #196421 - 11/12/11 05:56 PM

So the 1911 on the action, what does that signify? That the action is a model 1911 or made in 1911 or ?

Also the barrel 1940, would that mean the barrel was probably made in 1940 and the rifle barrelled or re-barrelled approximately then?

***

Thanks Igorrock for that link. Looks pretty much the same.

***

Thanks Lancaster for the information.


GK, Thanks for the information and reply.


Lancaster and GK,

I read what you are saying regarding if this is in good condition a military rifle collector might like it in their collection.

I bought the rifle off used guns, and this one and a second one sat on their listings I believe for eighteen months. So collectors would have had ample chance to snap it up if they were interested. Also there was a second one there anyway still listed when I looked last.

Regarding matching numbers will have a look to see if it does.

Re good vs bad bores, as I want a shooter, I don't want a rifle with a poor bore. Better a rifle with a poor bore sits in a collectors gun safe than mine! I am not intending to re-barrel but want a 6.5x53R Steyr. Haven't checked out the bore properly yet. If the barrel is not up to it, it can become a collectors safe-queen.

However I only bought this rifle after I believed I missed out on the 6.5x54 previously displayed on a thread. So my intention was to try to do something with that one first. Neither are a high priority seeing what I have bought since. So they may come back on the market one day still in same condition.

I do like the look of this classic Steyr action however in a nice customised rifle. Good to get information on them and their origins.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
darwinmauser
.300 member


Reged: 07/05/07
Posts: 217
Loc: Darwin NT
Re: Steyr 6.5x53R - info on this wanted as well [Re: NitroX]
      #196439 - 11/12/11 08:54 PM


John the Dutch had a 1895 model Mannlicher so the 1911 would be a manufacture date and the 1940 would be when it was last rebarreled. It looks to be in very good condition especially if it was used in Indonesia , normally they are beat to hell when the colonials finished with them. I would agree that if it's all matching it's more of a collectors piece than a candidate for a sporter. As a matter of interest a quantity of these rifles were sent to Lithgow in about 1940 to be rebarreled to 303 British ,from memory they were lost when the ship carrying them back was sunk.


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39881
Loc: Barossa Valley, South Australi...
Re: Steyr 6.5x53R - info on this wanted as well [Re: darwinmauser]
      #196844 - 16/12/11 12:30 AM

Thanks darwinmauser.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39881
Loc: Barossa Valley, South Australi...
Re: Steyr 6.5x53R - info on this wanted as well [Re: NitroX]
      #339771 - 04/04/20 11:08 PM

This rifle is still intact and unaltered. Amazing this thread from 'yesterday' was eleven years ago!

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 9033
Loc: There's a lighthouse in the mi...
Re: Steyr 6.5x53R - info on this wanted as well [Re: NitroX]
      #339773 - 05/04/20 04:02 AM

good to hear the rifle ist still original

have made hunting rifles in the past and will do it in the future but allways working with parts or deactivated guns of the lowest collector value where I use the action. this dutch mannlicher is just to fine to butcher it. they are very rare in this condition.

do you shoot it in the last 11 years? could be a good hunting rifle when the iron sights are right.

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39881
Loc: Barossa Valley, South Australi...
Re: Steyr 6.5x53R - info on this wanted as well [Re: lancaster]
      #347380 - 01/12/20 12:04 AM

Quote:

good to hear the rifle ist still original

have made hunting rifles in the past and will do it in the future but allways working with parts or deactivated guns of the lowest collector value where I use the action. this dutch mannlicher is just to fine to butcher it. they are very rare in this condition.

do you shoot it in the last 11 years? could be a good hunting rifle when the iron sights are right.




Hi Lancaster, still a "collectors" safe queen. Haven't shot it yet.

If it ever gets modified sporterised it won't be soon. Can't pay for it anyway.

Loads of higher priorities for both getting shooting and customising as needed first.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39881
Loc: Barossa Valley, South Australi...
Re: Steyr 6.5x53R - info on this wanted as well [Re: NitroX]
      #347434 - 01/12/20 05:23 PM

Hi Guys, ignoramus here.

Are these the correct stripper clips for my rifle?

https://www.buffaloarms.com/dutch-hembrug-1895-mannlicher-stripper-clips-scmdutch

https://buffaloarms-ecomitizellc.netdna-...a0/scmdutch.jpg

Dutch Hembrug & 1895 Mannlicher Stripper Clips
Be the first to review
Sku: SCMDUTCH

Availability: In Stock

Manufacturer: Buffalo Arms Co.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3591
Loc: Darwin, Top End of Australia
Re: Steyr 6.5x53R - info on this wanted as well [Re: NitroX]
      #347438 - 01/12/20 10:59 PM

They look correct to me.
Price is not too bad if you grab ten, even with our current exchange rate.

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au


Post Extras: Print Post   Remind Me!   Notify Moderator  
3DogMike
.400 member


Reged: 29/01/15
Posts: 1464
Loc: Western Slope, Colorado USA
Re: Steyr 6.5x53R - info on this wanted as well [Re: Marrakai]
      #347451 - 02/12/20 04:07 AM

Nitro John,
Yes, those are the proper ones for the Dutch/Romanian Steyr Mannlicher.
Got those same ones from Buffalo and use them in my Wm. Evans .256 Mannlicher (6.5x53R)
- Mike

--------------------
"Will Rogers never met a fighter pilot"
- Anon

“Always carry a flask of whiskey in case of snakebite, and furthermore always carry a small snake."
-- W. C. Fields


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rothhammer1
.400 member


Reged: 06/01/17
Posts: 1826
Loc: The Redwoods of California
Re: Steyr 6.5x53R - info on this wanted as well [Re: NitroX]
      #347453 - 02/12/20 07:03 AM

Quote:

This rifle is still intact and unaltered. Amazing this thread from 'yesterday' was eleven years ago!




John;
If you want to know more about 'Dutch Mannlichers' (or any other military firearm of the 19th - 20th Centuries) than any human should, watch Othias and Mae at C&Rsenal. Their videos are very thorough.

If your information is not in this video: https://www.youtube.com/watch?v=oYReGvJeiO0 , watch their others. There are several on Mannlicher variants.

More: https://www.youtube.com/watch?v=BUo6d9madRY

https://www.youtube.com/watch?v=-B8F4IfA35g

https://www.youtube.com/watch?v=1qLF693Dxs8

https://www.youtube.com/watch?v=cG6dwtGsZTg

--------------------
Citizen of the Cherokee Nation

Edited by Rothhammer1 (02/12/20 07:15 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rothhammer1
.400 member


Reged: 06/01/17
Posts: 1826
Loc: The Redwoods of California
Re: Steyr 6.5x53R - info on this wanted as well [Re: NitroX]
      #347455 - 02/12/20 08:14 AM

Quote:

This rifle is still intact and unaltered. Amazing this thread from 'yesterday' was eleven years ago!




Here is one like yours, but rough: https://simpsonltd.com/dutch-mann-licher-d16084/#gallery-6

Makes a good case for keeping yours original.

--------------------
Citizen of the Cherokee Nation


Post Extras: Print Post   Remind Me!   Notify Moderator  
Hoot
.275 member


Reged: 25/01/17
Posts: 93
Loc: MN
Re: Steyr 6.5x53R - info on this wanted as well [Re: Rothhammer1]
      #347456 - 02/12/20 09:36 AM

Another source but I don't know if they will export...
https://www.gunpartscorp.com/products/263190


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rothhammer1
.400 member


Reged: 06/01/17
Posts: 1826
Loc: The Redwoods of California
Re: Steyr 6.5x53R - info on this wanted as well [Re: Rothhammer1]
      #347457 - 02/12/20 10:00 AM

I've poked about on the 'net a bit and found things that agree with / expand on GK and others' posts above.

Watch this vid at 22:34 https://www.youtube.com/watch?v=o0lXFAXzLfk for a variant that matches yours - the KNIL Marechaussee, or M95 Karabijn.


Another reference: https://www.quartermastersection.com/dutch-east-indies/infantry-weapons/1249/M.95Karabijn

KNIL: https://www.globalsecurity.org/military/world/europe/nl-landmacht-knil.htm

KNIL video: https://www.youtube.com/watch?v=2MlbRPjppOs

From what I've found in a brief internet search, they seem to be fairly common in horrible condition but yours may be rather scarce as clean as it is if unmodified. It seems that most of them were used and used hard for decades.

Have you checked the chamber size just to be sure? The 1940 date would fit for a rebarrel in Holland just prior to Nazi invasion, and is consistent with other examples to be found on the 'net, but many were later converted to .303 British.


KNIL Marechaussee M95 Karabijn


Captured and used by Japanese


KNIL

--------------------
Citizen of the Cherokee Nation


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rothhammer1
.400 member


Reged: 06/01/17
Posts: 1826
Loc: The Redwoods of California
Re: Steyr 6.5x53R - info on this wanted as well [Re: Rothhammer1]
      #347466 - 02/12/20 03:01 PM

I've got something for you, John.

I seem to have discovered the identity of the unit marking on your KNIL Marechaussee. Per information found here; https://www.gunboards.com/threads/dutch-knil-carbine-help.1085037/ , it was issued to the KNIL South & East Borneo Territorial Command.

Here's the pertinent bits:

-------------------------------------------------------------------------

Z. O. B. is Garnizoensbataljon Zuid- en Oost afd. Borneo. Garrison Battalion of South & East Borneo. the e- is usually preceded by a unit number but because of the low weapon number and the fact that it is a garrison rather than a field unit there is no unit number. I don't know where the garrison was located on Borneo. Neat pick up. Thanks for sharing.
Regards
Dan

South and East Borneo, would suggest the Oil well and oil storage Town and Port of Kalimantan, the only major place that would merit a Garrison for its strategic importance.
Also the Provincial capital.
The KNIL managed to fire the oil plants and storage before the Japanese occupied Borneo in 1942.
Doc AV

Doc AV
I think you nailed it. The carbine configuration is that of the Marechaussee. The unit information came from the book "Nederlandse Vurrwappens, KNIL En Militaire Luchtvaat 1897-1942." by Drs. G. de Vries & B. J. Martens. The book is printed in the Dutch language. They wrote several books on Dutch weapons.
Regards
Dan

------------------------------------------------------------------------



So, if I have it right, your carbine came into this world at Steyr, Austria, in 1911 as a full length 'Dutch' M1895 Mannlicher rifle which was sent to Hembrug in the Netherlands in 1940 to be reconfigured to its present carbine form for issue to the KNIL at the Garrison Battalion of South and East Borneo.


Other stuff:

South and East Borneo Territorial Command (Regiment status), overseeing southern and eastern part of Borneo, commanded by Lt. Col. H.T. Halkema.

Combat units:
South and East Borneo Garrison battalion, based in Bandjermasin
City Watchmen company, based in Bandjermasin
Militia platoon, based in Bandjermasin

Detached units:
City Watchmen platoon, based in Amoentai
City Watchmen platoon, based in Barabai
City Watchmen platoon, based in Kandangan
Air Defense Artillery squad, based in Koetawaringin Airbase

Fire Support unit:
Air Defense Artillery squad, based in Bandjermasin

Other Support unit:
Mobile Auxiliary First-Aid platoon

https://www.awm.gov.au/collection/C1173341

https://surplused.com/index.php/2014/09/25/a-quick-and-dirty-guide-dutch-mannlichers/




Post Extras: Print Post   Remind Me!   Notify Moderator  
Spud303
.224 member


Reged: 25/05/11
Posts: 48
Loc: ACT, Australia
Re: Steyr 6.5x53R - info on this wanted as well [Re: NitroX]
      #347533 - 04/12/20 08:10 PM

John,
You may run into some problems importing those stripper clips from the USA. I think there might be restrictions for the sellers on sending them here (the rules seem to change constantly these days). They are available at the gunshows over here in NSW & I've been buying them for use in my Steyr sporter. If you can't find any in SA I'm happy to send a few over to get you going.
Spud


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39881
Loc: Barossa Valley, South Australi...
Re: Steyr 6.5x53R - info on this wanted as well [Re: Spud303]
      #347536 - 04/12/20 11:19 PM

Yes I was going to talk to Bob about that. I think buffalo does not export (?)

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26994
Loc: Beautiful British Columbia, Ca...
Re: Steyr 6.5x53R - info on this wanted as well [Re: NitroX]
      #347541 - 05/12/20 04:59 AM

"Buffalo Arms" if that is of whom you are referring, exports to Canada - things like moulds, but if stripper clips are listed as gun parts, they might have export restrictions at the USA border to anywhere outside those borders.
DHS might have to be contacted, or more simply, Buffalo Arms.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Waidmannsheil
.400 member


Reged: 19/04/13
Posts: 2443
Loc: Melbourne Australia
Re: Steyr 6.5x53R - info on this wanted as well [Re: DarylS]
      #347545 - 05/12/20 06:06 AM

John, you won't have any problems bringing the clips into Australia, I have done it heaps of times. You will however struggle to get anyone in the US to send you any. From Europe however is not a problem which is where many of mine have come from.

Matt.

--------------------
There is nothing wrong with vegetarian food, so long as there is meat with it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rothhammer1
.400 member


Reged: 06/01/17
Posts: 1826
Loc: The Redwoods of California
Re: Steyr 6.5x53R - info on this wanted as well [Re: NitroX]
      #347574 - 06/12/20 08:31 AM

Quote:

Yes I was going to talk to Bob about that. I think buffalo does not export (?)




I just poked around on the 'net and found these:

https://enoughgun.com/forum/viewtopic.php?f=2&t=1240

https://www.police.nsw.gov.au/online_ser...arms_or_weapons

https://b709a-form-victoria.pdffiller.com/

https://enoughgun.com/forum/viewtopic.php?f=76&t=782

It seems that (if information is current and if I understand it correctly) to receive firearms magazines (or any other part, ammo component...) you would need to apply for and receive a 'Form B709' (and / or B709A ?) from your local law enforcement agency(?).

I'd be willing to have them 'drop shipped' to me and then forward them to you as long as it's legal and we're compliant.

Otherwise I'd simply declare them as 'machine parts' or 'hardware' on the customs forms and ship them off. Shipping of anything from US to OZ seems to be rather expensive, however.

I sent you a PM with a few more details.

--------------------
Citizen of the Cherokee Nation


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 94 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 26796

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved