Home | Ezine | Forums | Links | Contact
NitroExpress.com: Ruger Bisley Blackhawk Hunter

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Handguns

Pages: 1
Seancass
.224 member


Reged: 30/11/11
Posts: 21
Loc: IN, USA
Ruger Bisley Blackhawk Hunter
      #195530 - 02/12/11 07:25 AM

Here's a quick pic of my Ruger Bisley. She wears a Leupold M8 2x EER. Nothing much, but she shoots better than I can. This is the gun that has just gotten me started handloading.



The gun can do better than this, but I can't do a whole lot better!



Here's my first try at 100 yard shooting with it. I've since taken a liking to plinking at steel so i don't have any picture of groups or of the "clang" sound. This group was 5 shots under 5 inches so maybe i was a little scared i couldn't repeat it! My handloads easily(soundly!) outdo any factory rounds i've found yet. They're pretty basic, no tricks or skilled work, just powder and lead.


Edited by CptCurl (02/12/11 10:47 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
CptCurlAdministrator
.450 member


Reged: 01/05/04
Posts: 5284
Loc: Fincastle, Botetourt County, V...
Re: Ruger Bisley Blackhawk Hunter [Re: Seancass]
      #195536 - 02/12/11 07:54 AM

Very good shooting and a fine handgun. .44 Mag.?

Curl

--------------------
RoscoeStephenson.com

YOUR DOUBLE RIFLE IS YOUR BEST FRIEND.



Post Extras: Print Post   Remind Me!   Notify Moderator  
FATBOY404
.400 member


Reged: 14/11/09
Posts: 1730
Loc: QLD
Re: Ruger Bisley Blackhawk Hunter [Re: CptCurl]
      #195537 - 02/12/11 08:22 AM

That is some good shooting.

I had a couple of hand guns for awhile but with our gun laws in Qld it all got too hard.

My favourite was a Para Ordnance P14 45ACP.

Thanks for sharing.

--------------------
"WHATEVER BLOWS YOUR HAIR BACK"


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 27017
Loc: Beautiful British Columbia, Ca...
Re: Ruger Bisley Blackhawk Hunter [Re: FATBOY404]
      #195539 - 02/12/11 08:59 AM

Sounds like a .45 Colt and the 2400 is only a moderate load, but one listed for Ruger Blackhawks, I think. In a .44mag, it's a heavy .44 SPL load.

5" to 6" at 100yards is VERY good accuracy (my opinion) from an accurate revolver with open sights.

With the scope, I'm sure you can do better - either with a more accurate load, or with more practise - keep at 'er, you're headed in the right direction.

Way to go! Nice looking combination, the heavy full length rib and all stainless.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Seancass
.224 member


Reged: 30/11/11
Posts: 21
Loc: IN, USA
Re: Ruger Bisley Blackhawk Hunter [Re: DarylS]
      #195594 - 03/12/11 01:26 AM

It is a .44 Mag. Not loaded too heavy. I think i've since made more accurate loads, this was one of my first times shooting it. I've got some much nicer loads now that are very pleasant to shoot and more accurate than me.

As i said, I really enjoy shooting steel so i havn't gone for groups recently. I should mention, the 35yd group was rested, the 100yd group was seated with my back against a truck tire and my hands wedged between my knees.

I know the scope i have is a high quality scope, but my eyes could really use more than 2x to get the full long range potential out of this gun.

Thanks for all the compliments!


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 27017
Loc: Beautiful British Columbia, Ca...
Re: Ruger Bisley Blackhawk Hunter [Re: Seancass]
      #195611 - 03/12/11 04:36 AM

Looking good Sean. My own .44's have prefered full charges with 245 to 275gr. SWC's, flat bases, all keith Style, square or rounded grease grooves, no checks using 2400, H110 and W296. Unfortunately, they're hard on my little Smith29, not so with your Bisley.

I've use the 50/50 Alox, LBT Blue, SPG and Lyman BP Gold over the years. All shoot well without and leading in my revolvers. The bullets I shoot are all .430" in diameter to match my cylinder throats & I shoot nothing harder than WW alloys - without zinc. This helps accuracy. Commercial cast bullets are harder and usually lead some as they don't obturate well to seal as-do the WW bullets.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 150 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2787

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved