Home | Ezine | Forums | Links | Contact
NitroExpress.com: english sidemount on my Metfordrifled .333.Jeffery Mauser

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1
rigbymauser
.400 member


Reged: 15/05/05
Posts: 1970
Loc: Denmark
english sidemount on my Metfordrifled .333.Jeffery Mauser
      #104271 - 05/05/08 03:30 AM

A nickel 26mm steel scope 4x36.





Edited by CptCurl (04/05/11 08:32 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
mehulkamdar
.416 member


Reged: 09/01/04
Posts: 3688
Loc: State of Ill-Annoy USA.
Re: english sidemount on my Metfordrifled .333.Jeffery Mauser [Re: rigbymauser]
      #104278 - 05/05/08 05:50 AM

Rigbymauser,

What a beautiful rifle! Is this a new gun or an old one restored by an expert?

And if it is a new gun, are Metford rifled barrels still being made somewhere?

Thanks for posting and good hunting!

--------------------
The Ark was made by amateurs. Experts built the Titanic.

Mehul Kamdar


Post Extras: Print Post   Remind Me!   Notify Moderator  
rigbymauser
.400 member


Reged: 15/05/05
Posts: 1970
Loc: Denmark
Re: english sidemount on my Metfordrifled .333.Jeffery Mauser [Re: mehulkamdar]
      #104311 - 05/05/08 02:55 PM

Quote:

Rigbymauser,

What a beautiful rifle! Is this a new gun or an old one restored by an expert?

And if it is a new gun, are Metford rifled barrels still being made somewhere?

Thanks for posting and good hunting!





http://forums.accuratereloading.com/eve/forums/a/tpc/f/3221043/m/825104938

Thanks for your compliments!. Perhaps this rifle here would a good choice for India along with my 10 bore??..hahaha


Post Extras: Print Post   Remind Me!   Notify Moderator  
Paul
.400 member


Reged: 28/08/07
Posts: 1031
Loc: Melbourne, Victoria, Australia
Re: english sidemount on my Metfordrifled .333.Jeffery Mauser [Re: rigbymauser]
      #104541 - 08/05/08 09:42 PM

Nice rifle! How do you find the Nickel scope? I nearly bought one with a smaller objective, new but discounted to $50, then realised that despite its wee front bell, it was a 6X. It gave a beautiful view but had too much power and too little light gathering to put on my .30/06 for our thick bush.

Post Extras: Print Post   Remind Me!   Notify Moderator  
mehulkamdar
.416 member


Reged: 09/01/04
Posts: 3688
Loc: State of Ill-Annoy USA.
Re: english sidemount on my Metfordrifled .333.Jeffery Mauser [Re: Paul]
      #104547 - 08/05/08 11:13 PM

The Nickel name has been revived by Gerhard Optik.

--------------------
The Ark was made by amateurs. Experts built the Titanic.

Mehul Kamdar


Post Extras: Print Post   Remind Me!   Notify Moderator  
mehulkamdar
.416 member


Reged: 09/01/04
Posts: 3688
Loc: State of Ill-Annoy USA.
Re: english sidemount on my Metfordrifled .333.Jeffery Mauser [Re: rigbymauser]
      #104548 - 08/05/08 11:19 PM

Rigbymauser,

Very nice pics. I am still intrigued by where you got the Metford rifled barrel made because your other post suggests that your barrelmaker had several more Metford rifled barrels. I can understand that you may want to keep this secret.

India is about to reopen hunting for non Indian citizens for pigs (some of the biggest boar in the world) and nilgai. The pressure is on the country to make it work and the onlys tumbling block has been the government's insistence that there be trained professional shikaris to guide the hunt. While the old shikaris have died out, some SOuth African companies have started to train shikaris in India from what I have heard and you may soon be able to give your rifles the thrill of hunting in India again.

Cheers!

--------------------
The Ark was made by amateurs. Experts built the Titanic.

Mehul Kamdar


Post Extras: Print Post   Remind Me!   Notify Moderator  
Paul
.400 member


Reged: 28/08/07
Posts: 1031
Loc: Melbourne, Victoria, Australia
Re: english sidemount on my Metfordrifled .333.Jeffery Mauser [Re: mehulkamdar]
      #104551 - 08/05/08 11:24 PM

I'll be interested to know how good they are in field blending, eye relief and recoil resistance.

Edited by Paul (08/05/08 11:28 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
rigbymauser
.400 member


Reged: 15/05/05
Posts: 1970
Loc: Denmark
Re: english sidemount on my Metfordrifled .333.Jeffery Mauser [Re: mehulkamdar]
      #104588 - 09/05/08 06:36 AM

Quote:

Rigbymauser,

Very nice pics. I am still intrigued by where you got the Metford rifled barrel made because your other post suggests that your barrelmaker had several more Metford rifled barrels. I can understand that you may want to keep this secret.

India is about to reopen hunting for non Indian citizens for pigs (some of the biggest boar in the world) and nilgai. The pressure is on the country to make it work and the onlys tumbling block has been the government's insistence that there be trained professional shikaris to guide the hunt. While the old shikaris have died out, some SOuth African companies have started to train shikaris in India from what I have heard and you may soon be able to give your rifles the thrill of hunting in India again.

Cheers!




Please don`t be puzzled with the barrelmaker. His name is Arthur Smith of Colchester. He made me two barrels in .333cal metford rifled( 7 grooved)+ one for himself. The twist ratio is 1:11 as the original jefferys were. Before anyone will decide to get such a special barrel, I think they will have too wait atleast two years as I did + pushing the barrelmaker for every 2 weeks......hahaha. I am sure Mr Smith will makeup such a barrel again....but one will have to be armed with heavenly giftet patience. Each barrel back then cost £650(included London proofmaks) + s&h....so it weren`t all that bad either...hahaha.
I ordered two barrels so in case in many years to come, I could have the spare barrel when the other is worn out. (I am gonna keep this rifle here)
I spended over $1000 in phone bills to call every barrel maker in USA to make me these .333cal barrels with the segmental grooves of the metford pattern...nobody made .333cals and none of them had heard anything about "metford segmental rifling".
India as a country has always been more interesting for me than even africa. I have somehow got to collect many books of hunting in India.

Edited by rigbymauser (09/05/08 06:38 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
9.3x57
.450 member


Reged: 22/04/07
Posts: 5501
Loc: United States
Re: english sidemount on my Metfordrifled .333.Jeffery Mauser [Re: rigbymauser]
      #104613 - 09/05/08 12:11 PM

[quote India as a country has always been more interesting for me than even africa.




First, GREAT rifle! Really interesting project and a really interesting end result! I hope it takes plenty of rådyr, hjort, elg and...nilgai!!

To Africa I have been a number of times, but India...India does indeed seem more fascinating!

--------------------
What are the Rosary, the Cross or the Crucifix other than tools to help maintain the fortress of our faith in Jesus Christ, the Son of God?


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39201
Loc: Barossa Valley, South Australi...
Re: english sidemount on my Metfordrifled .333.Jeffery Mauser [Re: 9.3x57]
      #180576 - 03/05/11 02:59 AM

BTTT too.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
vikram
.300 member


Reged: 29/07/04
Posts: 105
Loc: Warwickshire,England
Re: english sidemount on my Metfordrifled .333.Jeffery Mauser [Re: NitroX]
      #180583 - 03/05/11 03:30 AM

Lovely rifle.

--------------------
"Routine is death to Heroism."- P.G.Wodehouse


Post Extras: Print Post   Remind Me!   Notify Moderator  
Lee440
.224 member


Reged: 06/01/06
Posts: 47
Loc: Texas
Re: english sidemount on my Metfordrifled .333.Jeffery Mauser [Re: mehulkamdar]
      #181039 - 08/05/11 06:52 AM

I see this is an old post, but I would love to know who makes that sidemount and is it available on the market. Lovely rifle!

Post Extras: Print Post   Remind Me!   Notify Moderator  
rigbymauser
.400 member


Reged: 15/05/05
Posts: 1970
Loc: Denmark
Re: english sidemount on my Metfordrifled .333.Jeffery Mauser [Re: Lee440]
      #181041 - 08/05/11 07:01 AM

Quote:

I see this is an old post, but I would love to know who makes that sidemount and is it available on the market. Lovely rifle!



Thanks! .

Recknagel makes the english sidemount.

I believe today in the white its about 440euros. But then ofcouse comes the squarebridging and fitting.


Post Extras: Print Post   Remind Me!   Notify Moderator  
tophet1
.400 member


Reged: 15/09/07
Posts: 1873
Loc: NSW, Australia
Re: english sidemount on my Metfordrifled .333.Jeffery Mauser [Re: rigbymauser]
      #181053 - 08/05/11 07:46 AM

Your killing me Jens .... drool.

Post Extras: Print Post   Remind Me!   Notify Moderator  
RobertL
.224 member


Reged: 21/04/11
Posts: 21
Loc: Germany
Re: english sidemount on my Metfordrifled .333.Jeffery Mauser [Re: tophet1]
      #181200 - 10/05/11 05:25 AM

Hello LEE440,

you can find a 1" sidemount at G. Prechtel see:

http://www.golmatic.de/Waffen_EN/buechsenmacherbedarf_en/visier_en.htm

Item #WTO2301

Robert


Post Extras: Print Post   Remind Me!   Notify Moderator  
Lee440
.224 member


Reged: 06/01/06
Posts: 47
Loc: Texas
Re: english sidemount on my Metfordrifled .333.Jeffery Mauser [Re: RobertL]
      #181963 - 19/05/11 11:41 AM

Thanks for the link, RobertL.!! There was little info or pics showing how it fits. Does it require square bridging the rear and how is it done?

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 23 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 7984

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved