Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Cogswell & Harrison 375 NE 2 1/2

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifle Photos & Archive

Pages: 1 | 2 | >> (show all)

chemarq
.275 member

Reged: 17/03/10
Posts: 50
Loc: Spain

Cogswell & Harrison 375 NE 2 1/2
#169051 - 06/10/10 08:46 AM

After too many months... finally i found a nice classic english double rifle that i was able to pay. It was not cheap but it was affordable for me... and i bought it in an auction.

The rifle was a Cogswell and Harrison, and i imagine that it was affordable because of the caliber, a bit old fashioned and unusual 375 NE 2 1/2. When the double arrived to Spain was not as beautifull as is now... but a slow process of restoration... and now it has returned to my home.

Here you have some pics... i am really in love with the gun. According to the manufacturers, it was made in 1912... and i can assure you that shoots perfectly.

The blue colours now are really beautiful, and it is an amazing old rifle, in my opinion. I just wanted to show you this nice old rifle, that has been my drem for many months, and now is a reality.

Just a small question for many gun collectors with much more experience than me. I have been able to get dies, and only 20 shells of this caliber. i would need information where to buy more shells, and some recomendations of loads for him. The barrels say that is regulated for 270 gr bullets with 40 gr of cordite.

Thank you

JM

Spain

--------------------
Spitskop Safaris - South Africa

www.spitskop.co.za

Edited by CptCurl (06/10/10 09:36 PM)

Post Extras:

Print Post

Remind Me!

Notify Moderator

chemarq
.275 member

Reged: 17/03/10
Posts: 50
Loc: Spain

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: chemarq]
#169052 - 06/10/10 08:49 AM

Just a detail of the wood stock.
Really nice walnut stock in reddish colour.

JM

--------------------
Spitskop Safaris - South Africa

www.spitskop.co.za

Edited by CptCurl (06/10/10 09:39 PM)

Post Extras:

Print Post

Remind Me!

Notify Moderator

mehulkamdar
.416 member

Reged: 09/01/04
Posts: 3688
Loc: State of Ill-Annoy USA.

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: chemarq]
#169053 - 06/10/10 08:56 AM

JM,

Very, very nice! The old Coggies are still much loved in India where many of them were sold. Did you restore her yourself, or did you get this done by a gunsmith? Details, please!

And, of course, hunting pictures will be eagerly anticipated now that you have served the appetizer. Waiting for the lovely main course . . .

Good hunting!

--------------------
The Ark was made by amateurs. Experts built the Titanic.

Mehul Kamdar

Post Extras:

Print Post

Remind Me!

Notify Moderator

RigbyUser
.275 member

Reged: 23/11/08
Posts: 65
Loc: Victoria, Australia

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: mehulkamdar]
#169262 - 10/10/10 01:23 AM

Also a useful medium game caliber, well done, great choice.
What will you hunt with this one? I imagine it will be lethal on red deer and boar.

Good luck with it

Post Extras:

Print Post

Remind Me!

Notify Moderator

lancaster
.470 member

Reged: 06/05/08
Posts: 9038
Loc: There's a lighthouse in the mi...

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: RigbyUser]
#169298 - 10/10/10 02:24 PM

great rifle and a fine medium cartridge for spain
because I have a mannlicher for this round was also looking for brass. the best way imho is to resize it from the new Hornady 405 Win brass.
270 grain bullets only available from Woodleigh now but you can also contact Wim Degol in Belgium who is making first class bullet that you can compare with the australian stuff.

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras:

Print Post

Remind Me!

Notify Moderator

Ben
.400 member

Reged: 22/08/08
Posts: 1917
Loc: Northern Territory, Australia

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: lancaster]
#169306 - 10/10/10 07:02 PM

Nice!

Post Extras:

Print Post

Remind Me!

Notify Moderator

kamilaroi
.400 member

Reged: 18/12/04
Posts: 1803
Loc: sydney, new south wales, Austr...

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: Ben]
#169309 - 10/10/10 08:06 PM

Pardon me but is that the original buttstock/ cheeekpiece?

Post Extras:

Print Post

Remind Me!

Notify Moderator

herrdoktor
.275 member

Reged: 03/08/07
Posts: 85
Loc: Spain

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: kamilaroi]
#169333 - 11/10/10 04:51 AM

Chemarq:

I have send you a private message

Antonio

Post Extras:

Print Post

Remind Me!

Notify Moderator

Oldbrit
.333 member

Reged: 04/04/10
Posts: 381
Loc: UK

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: herrdoktor]
#169382 - 12/10/10 04:22 AM

If you look back in the archives you will find that I bought some new brass for my 1902 Webley in 375 X 2.5" from Horneber. You may want to search under Oldbrit for my postings about that. Converting from any other calibre required more work than I am equipped for (i.e. a lathe).

Since then I've been loading the Horneber brass and I have no complaints about his quality, only his delivery times. It you're going to buy from him make sure he's got the brass in stock before you part with your cash.

I got the best results with Reloader 15 and had no difficulty matching factory ballistics (see below) with gas checked cast bullets. I've also tried AA2520 but it's very fine grained and I felt that I was getting powder into the primer pocket. A square of tissue tamped down into the case prior to charging with powder fixed it but it's a fiddle I don't need. I've also had good results with AA5744 for reduced loads in my single barrel rifle. I am going to try IMR 3031 sometime but haven't got around to it yet.

I also obtained a small supply of original Kynoch ammuntion made in the 1930s. One of the five round boxes was open with only four rounds in it. I pulled one and it indeed had a 270 grain bullet and 40 grains of Cordite. I shot the other three off and found they averaged about 1950 fps with a low velocity spread. When I have time and the patience to figure out how to post pictures I'll list photographs of the rifle and the ammunition.

Hope this helps.

Post Extras:

Print Post

Remind Me!

Notify Moderator

Oldbrit
.333 member

Reged: 04/04/10
Posts: 381
Loc: UK

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: Oldbrit]
#169412 - 12/10/10 08:43 PM

Ok, let's see if I can sort this pictures thing out...

My Webley was originally fitted with a scope in the factory but sadly that has gone the way of all flesh.

Edited by CptCurl (16/10/10 10:24 PM)

Post Extras:

Print Post

Remind Me!

Notify Moderator

chemarq
.275 member

Reged: 17/03/10
Posts: 50
Loc: Spain

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: RigbyUser]
#169639 - 16/10/10 02:02 AM

Quote:

Also a useful medium game caliber, well done, great choice.
What will you hunt with this one? I imagine it will be lethal on red deer and boar.

Good luck with it

My main objective id wild boar, hunting in thick forest, this is a suitable caliber for short distance shots.

Red deer usually force you to shoot a bit longer distances... and i will hunt with the 300 H&H, much more lethal in medium-long distances.

Thanks
Jose

--------------------
Spitskop Safaris - South Africa

www.spitskop.co.za

Post Extras:

Print Post

Remind Me!

Notify Moderator

chemarq
.275 member

Reged: 17/03/10
Posts: 50
Loc: Spain

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: Oldbrit]
#169641 - 16/10/10 02:05 AM

Quote:

If you look back in the archives you will find that I bought some new brass for my 1902 Webley in 375 X 2.5" from Horneber. You may want to search under Oldbrit for my postings about that. Converting from any other calibre required more work than I am equipped for (i.e. a lathe).

Since then I've been loading the Horneber brass and I have no complaints about his quality, only his delivery times. It you're going to buy from him make sure he's got the brass in stock before you part with your cash.

I got the best results with Reloader 15 and had no difficulty matching factory ballistics (see below) with gas checked cast bullets. I've also tried AA2520 but it's very fine grained and I felt that I was getting powder into the primer pocket. A square of tissue tamped down into the case prior to charging with powder fixed it but it's a fiddle I don't need. I've also had good results with AA5744 for reduced loads in my single barrel rifle. I am going to try IMR 3031 sometime but haven't got around to it yet.

I also obtained a small supply of original Kynoch ammuntion made in the 1930s. One of the five round boxes was open with only four rounds in it. I pulled one and it indeed had a 270 grain bullet and 40 grains of Cordite. I shot the other three off and found they averaged about 1950 fps with a low velocity spread. When I have time and the patience to figure out how to post pictures I'll list photographs of the rifle and the ammunition.

Hope this helps.

It seems that Horneber discontinued this caliber..is not in their list.

http://www.huelsen-horneber.de/frame_engl.html

You ordered many years ago ???

Jose

--------------------
Spitskop Safaris - South Africa

www.spitskop.co.za

Edited by chemarq (16/10/10 02:05 AM)

Post Extras:

Print Post

Remind Me!

Notify Moderator

lancaster
.470 member

Reged: 06/05/08
Posts: 9038
Loc: There's a lighthouse in the mi...

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: chemarq]
#169662 - 16/10/10 05:55 AM

horneber will make what ever you want...
but it can be that you wait 2-3 year's for your brass

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras:

Print Post

Remind Me!

Notify Moderator

chemarq
.275 member

Reged: 17/03/10
Posts: 50
Loc: Spain

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: lancaster]
#169702 - 16/10/10 09:29 PM

Quote:

horneber will make what ever you want...
but it can be that you wait 2-3 year's for your brass

I would prefer to find some brass earlier...

I have 30 brass and i can start shooting... but i feel more confident with 100 brass to work with...
That is teh reason because i am looking for some more.

Jose

--------------------
Spitskop Safaris - South Africa

www.spitskop.co.za

Post Extras:

Print Post

Remind Me!

Notify Moderator

Oldbrit
.333 member

Reged: 04/04/10
Posts: 381
Loc: UK

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: chemarq]
#169710 - 16/10/10 10:11 PM

As I received my brass only a couple of weeks ago and I only bought 100 I would assume he has some in stock now. His production runs must be in the thousands to make setting the kit up economically feasible. And no, it never was on his web site.

I've got some original Berdan brass knocking about but getting the primers is the problem. I did consider drilling it for shotgun primers for reduced loads but the arrival of the Horneber brass put this idea on hold. Has anybody ever tried this with old Berdan brass?

Edited by Oldbrit (16/10/10 10:16 PM)

Post Extras:

Print Post

Remind Me!

Notify Moderator

Oldbrit
.333 member

Reged: 04/04/10
Posts: 381
Loc: UK

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: Oldbrit]
#169711 - 16/10/10 10:24 PM

P.S. If you don't fancy Horneber you can try Kynamco, they sold me my first lot of Boxer brass...
http://www.new-kynoch.apt-sites.com/

Post Extras:

Print Post

Remind Me!

Notify Moderator

Oldbrit
.333 member

Reged: 04/04/10
Posts: 381
Loc: UK

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: Oldbrit]
#169713 - 16/10/10 10:37 PM

(I'm settling on this thread for this subject as it's getting confusing.)

Jeff Gray suggested that there may be problems getting Kynamco brass out of the UK. I'm not aware of any restrictions (I live about an hour's drive away from Kynamco). Would Jose have problems importing them into Spain?

Post Extras:

Print Post

Remind Me!

Notify Moderator

CHAPUISARMES
.416 member

Reged: 16/01/08
Posts: 2908
Loc: DUBBO, NSW, AUSTRALIA

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: Oldbrit]
#169738 - 17/10/10 07:50 AM

Hi Oldbrit,

Suggest you have another look at my post, I said that it WOULD BE POSSIBLE to get it out of UK but would need an Import certificate to get them into Australia from UK. If Kynamco is made by Bertram
( NOT ALL ) then go direct to Bertram. Their Email is.: b.bertram1@bigpond.com as they have no active website.

Cheers,

Jeff Gray

.

Post Extras:

Print Post

Remind Me!

Notify Moderator

AkMike
.416 member

Reged: 19/11/05
Posts: 2576
Loc: Anchorage, Alaska

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: CHAPUISARMES]
#169760 - 17/10/10 06:06 PM

I don't know if there's any export problems but Jamison International has 375 flanged brass. You could drop them an email and ask if they'll send some to you.

http://www.jamisoninternational.com/category-s/21.htm

--------------------
"When you see that in order to produce, you need to obtain permission from men who produce nothing; when you see that money is flowing to those who deal not in goods, but in favors; you may know that your society is doomed." Ayn Rand

Post Extras:

Print Post

Remind Me!

Notify Moderator

casper50
.400 member

Reged: 18/10/07
Posts: 1445
Loc: Alaska

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: AkMike]
#174013 - 24/01/11 11:56 PM

Buffalo arms sell it also. Not cheap.

http://www.buffaloarms.com/browse.cfm/4,190.html

website won't work. Search 375 flanged. $100 for 20 Bertram.

Edited by casper50 (24/01/11 11:58 PM)

Post Extras:

Print Post

Remind Me!

Notify Moderator

Igorrock
.400 member

Reged: 01/03/07
Posts: 1649
Loc: Finland

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: casper50]
#174202 - 27/01/11 03:40 AM

I think NORMA of Sweden makes ammo for this caliber...

http://www.norma.cc/content.asp?Typ=55&a...Nitro%20Express

--------------------
http://promaakari.wordpress.com/

Post Extras:

Print Post

Remind Me!

Notify Moderator

lancaster
.470 member

Reged: 06/05/08
Posts: 9038
Loc: There's a lighthouse in the mi...

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: Igorrock]
#174203 - 27/01/11 04:04 AM

no, this is another cartridge, the 375 Nitro Express flanged magnum
if you are looking for new ammo there is a guy on egun trying from time to time to sell new kynoch softpoint ammo for 5 euro per round. iirc he had over 120 cartridges and will give probably a discount if you take them all.

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras:

Print Post

Remind Me!

Notify Moderator

93mouse
.375 member

Reged: 17/08/07
Posts: 745
Loc: Slovenia

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: Igorrock]
#174205 - 27/01/11 04:09 AM

Igorrock .375 NE 2 1/2 is not .375 H&H Fl.

Edited by CptCurl (27/01/11 11:34 AM)

Post Extras:

Print Post

Remind Me!

Notify Moderator

Igorrock
.400 member

Reged: 01/03/07
Posts: 1649
Loc: Finland

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: 93mouse]
#174376 - 29/01/11 08:00 AM

Thanks for the correction.

--------------------
http://promaakari.wordpress.com/

Post Extras:

Print Post

Remind Me!

Notify Moderator

chemarq
.275 member

Reged: 17/03/10
Posts: 50
Loc: Spain

Re: Cogswell & Harrison 375 NE 2 1/2 [Re: 93mouse]
#174671 - 02/02/11 08:51 AM

Quote:

Igorrock .375 NE 2 1/2 is not .375 H&H Fl.

Really the 375 NE 2 1/2 is quite a slow cartridge.
Not suitable for dangerous game... but effective against wildboars or bears in short distances.

Best regards
Jose

--------------------
Spitskop Safaris - South Africa

www.spitskop.co.za

Post Extras:

Print Post

Remind Me!

Notify Moderator

Pages: 1 | 2 | >> (show all)

Extra information

0 registered and 75 anonymous users are browsing this forum.

Moderator: CptCurl

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 20890

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved