Home | Ezine | Forums | Links | Contact
NitroExpress.com: 1961 Mannlicher-Schoenauer MCA

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
pacecars
.300 member


Reged: 25/09/05
Posts: 130
Loc: Tallahassee, Florida, USA
1961 Mannlicher-Schoenauer MCA
      #163710 - 09/07/10 06:11 AM

I am about to become the proud owner of a 1961 Mannlicher-Schoenauer MCA .30-06 with the 1/2 sporter stock. Somewhere in its life the front and rear sights were removed completely. Where could I obtain original sights and who could install them? I am guessing the rear sight would be the main issue since they went to so much trouble to remove it completely. Did they come with a vented butt pad? Any reccomendations for a solid pad? Here is a link with pictures: http://24hourcampfire.com/ubbthreads/ubb...FS#Post4225133.

Post Extras: Print Post   Remind Me!   Notify Moderator  
pacecars
.300 member


Reged: 25/09/05
Posts: 130
Loc: Tallahassee, Florida, USA
Re: 1961 Mannlicher-Schoenauer MCA [Re: pacecars]
      #163712 - 09/07/10 06:30 AM

The only real complaint I have with this model is the swept back bolt handle. How difficult would it be to have the bolt handle straightened?

Post Extras: Print Post   Remind Me!   Notify Moderator  
wjw
.275 member


Reged: 05/06/10
Posts: 55
Loc: b.c.
Re: 1961 Mannlicher-Schoenauer MCA [Re: pacecars]
      #163744 - 09/07/10 03:48 PM

pacecars

Just looked at mine. The handle has a slight angle back at the root. To look good, obne would have to cut the handle and grind the top of the root flat before weldong on a new handle. Trying to have the present handle straightened will most likely not be asthertically pleasing.

Bill

Post Extras: Print Post   Remind Me!   Notify Moderator  
pacecars
.300 member


Reged: 25/09/05
Posts: 130
Loc: Tallahassee, Florida, USA
Re: 1961 Mannlicher-Schoenauer MCA [Re: wjw]
      #163755 - 09/07/10 09:40 PM

I will have to look at it when it arrives and see if I can get used to it. Ihave had a 1910, 1908 and a 1950 not to mention a few Model M Pros and they all had the straight bolt handle which looks better to me but I may get used to it. I figure this gun has already been messed with so I can't really hurt it.

Post Extras: Print Post   Remind Me!   Notify Moderator  
pacecars
.300 member


Reged: 25/09/05
Posts: 130
Loc: Tallahassee, Florida, USA
Re: 1961 Mannlicher-Schoenauer MCA [Re: pacecars]
      #164662 - 21/07/10 06:42 AM

What would be the best way to rfinish the stock? I want a hand rubbed oil finish, no white line spacers and a solid recoil pad.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 62 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2701

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved