Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: SHORT Action Mauser '98

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1

UtahShotgunner
.275 member

Reged: 07/01/08
Posts: 53
Loc: PA

SHORT Action Mauser '98
#163377 - 05/07/10 01:56 AM

Directed to this forum from Accurate Reloading, it took me a while to realize I had registered here a couple of years ago.

Here is my original question and some information I added in regard to replies at Accurate Reloading.

Quote:

Saw one today. Heavy barrel chambered in .222, stocked in birdseye maple and wearing a Lichert 12x.

Nice 50's or 60's varmint rifle. I have never seen a short action Mauser. I called a gunsmith friend and we chatted, but he was unsure of the value though he did say they are rare.

I am putting this up in a couple forums here but what forum here would be best to ask this question on?

I post here rarely, so apologies if I should have put this elsewhere.

PS I did look for possibility that it was a welded action. I did not see any sign of this.

Quote:

I am a long way from home for the 4th holiday. I may be able to take another look at the rifle.

If we assume that I can determine it is an original kurz action, and not a reweld, what would the value on JUST the action be.

I'll judge the value of the rest of the rifle attached to it.

I'll ask if we can pull it from the stock tomorrow if I can get there again.

From memory, other things I noticed.

It had complete bottom metal, magazine fed.

"v76" or similar on side of action.

I did not see the s/n on any piece as I have noticed on military Mausers.

Appeared to have stripper clip guide.

That is all I can remember at the moment.

Post Extras:

xausa
.400 member

Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA

Re: SHORT Action Mauser '98 [Re: UtahShotgunner]
#163389 - 05/07/10 08:56 AM

If you want to see what an original "Kurz" action looks like: http://www.egun.de/market/item.php?id=2765723

Post Extras:

UtahShotgunner
.275 member

Reged: 07/01/08
Posts: 53
Loc: PA

Re: SHORT Action Mauser '98 [Re: xausa]
#163398 - 05/07/10 11:43 AM

Okay, can someone put a 'worst case' value on the action alone, if I can determine it is a true kurz?

I called and will be able to examine/purchase it tomorrow. IF it passes examination.

Post Extras:

Huvius
.416 member

Reged: 04/11/07
Posts: 3556
Loc: Colorado

Re: SHORT Action Mauser '98 [Re: UtahShotgunner]
#163404 - 05/07/10 02:51 PM

Quote:

Okay, can someone put a 'worst case' value on the action alone, if I can determine it is a true kurz?

You are kind of asking for a lot of speculation here.
Most Kurz actions I have seen for sale - and that's not a lot - are in the $2-3K range.
Should be fairly easy to identify as original or not. Remember, they are all small ring actions except for maybe one or two known.

Is it a square bridge action or a standard round action?
Is it cut for a scope or unaltered?
If it is a rare configuration the value may be much more than the action alone and a shame to split up.
Are you considering it for the action alone?
All I can say is that Kurz Mausers are indeed rare and a good one is hard to come by these days.

--------------------
He who lives in the past is doomed to enjoy it.

Post Extras:

UtahShotgunner
.275 member

Reged: 07/01/08
Posts: 53
Loc: PA

Re: SHORT Action Mauser '98 [Re: Huvius]
#163406 - 05/07/10 03:45 PM

Going to look again tomorrow but as I remember:

Round

Drilled for Lichert externally adjustable mount.

Configuration: USA built custom varminter stocked in birdseye maple.

Not going for the action. I'd keep it as is, but valuing it for the action and then I can figure out the rest.

Post Extras:

justcurious
.333 member

Reged: 17/03/10
Posts: 285
Loc: Germany

Re: SHORT Action Mauser '98 [Re: UtahShotgunner]
#163432 - 06/07/10 01:25 AM

Have never seen or heard of an original Oberndorf in whatever configuration the bolt head fitting a .222 cartridge.

Only a few post war FN standard length actions.

Post Extras:

kuduae
.400 member

Reged: 13/01/10
Posts: 1792
Loc: middle of Germany

Re: SHORT Action Mauser '98 [Re: justcurious]
#163440 - 06/07/10 03:31 AM

Photos of the action, please!
"V 76" may point to the Mauser factory, as Mauser used a V-prefix serial # for experimental actions.It depends on where it is and how it looks like. V stood for "Versuch" = test or try.

Post Extras:

TilleyMan
.333 member

Reged: 23/08/05
Posts: 272
Loc: Melbourne, Australia

Re: SHORT Action Mauser '98 [Re: justcurious]
#163453 - 06/07/10 06:42 AM

Quote:

Have never seen or heard of an original Oberndorf in whatever configuration the bolt head fitting a .222 cartridge.

Unless you particularly want a Kurtz Mauser action, you could save a small fortune by choosing a Brno ZKK601 short action (M98 derivative, essentially a small ring size with a grooved 'double square bridge' style receiver available from the factory in .222, .223. .243 and .308 etc).

If you get one with the right size bolt face most of the work will have been done, all that remains is some action smoothing and a trigger job. Should be able to pick up a whole rifle for $650-750... quite a few were imported to Canada I'm told.

Cheers

TM

Post Extras:

UtahShotgunner
.275 member

Reged: 07/01/08
Posts: 53
Loc: PA

Re: SHORT Action Mauser '98 [Re: kuduae]
#163473 - 06/07/10 03:06 PM

Quote:

Photos of the action, please!
"V 76" may point to the Mauser factory, as Mauser used a V-prefix serial # for experimental actions.It depends on where it is and how it looks like. V stood for "Versuch" = test or try.

I originally planned to post this:

"Welded....

From what I could see, using the advice and information from the folks here and Accurate Reloading. Oh well. A very cool project that someone put together with some very good workmanship, but not worth the asking price to me at the moment.

I am still mulling it over and may call up and offer them a lowball price. The old Lichert, which originally caught my attention, would be nice on one of my older rifles."

With what you said, I am uploading some (rather poor) pictures to Photobucket from my cell phone camera. I'll post them up when I get them on Pb.

Edited by UtahShotgunner (06/07/10 03:07 PM)

Post Extras:

UtahShotgunner
.275 member

Reged: 07/01/08
Posts: 53
Loc: PA

Re: SHORT Action Mauser '98 [Re: UtahShotgunner]
#163484 - 06/07/10 03:55 PM

Edited by CptCurl (06/07/10 08:28 PM)

Post Extras:

CptCurl
.450 member

Reged: 01/05/04
Posts: 5284
Loc: Fincastle, Botetourt County, V...

Re: SHORT Action Mauser '98 [Re: UtahShotgunner]
#163500 - 06/07/10 08:31 PM

UtahShotgunner:

That's not a '98 action and certainly not a Kurz.

It's a '93 or '95 - I'm not an expert on the older Mausers. The bolt shroud clearly isn't for a '98:

Curl

--------------------
RoscoeStephenson.com

YOUR DOUBLE RIFLE IS YOUR BEST FRIEND.

Post Extras:

Paul
.400 member

Reged: 28/08/07
Posts: 1031
Loc: Melbourne, Victoria, Australia

Re: SHORT Action Mauser '98 [Re: CptCurl]
#163502 - 06/07/10 09:01 PM

I'm a little puzzled, Utah...,
did you mean the action was cut and welded to make it short? Also, has one of your pics been reversed to look left-handed?

- Paul

Post Extras:

UtahShotgunner
.275 member

Reged: 07/01/08
Posts: 53
Loc: PA

Re: SHORT Action Mauser '98 [Re: Paul]
#163512 - 06/07/10 10:26 PM

Paul,

Yes, close inspection showed signs that led me to think it was welded. One picture was flipped for easier viewing, it is not a lefty.

Post Extras:

darwinmauser
.300 member

Reged: 07/05/07
Posts: 217
Loc: Darwin NT

Re: SHORT Action Mauser '98 [Re: UtahShotgunner]
#163514 - 06/07/10 10:31 PM

It's an m93 ,the square bottom of the bolt shows that, the square bottom was discontinued with the next model.

Post Extras:

justcurious
.333 member

Reged: 17/03/10
Posts: 285
Loc: Germany

Re: SHORT Action Mauser '98 [Re: darwinmauser]
#163515 - 06/07/10 10:37 PM

M93 as bolt head , shroud and bolt body without guide rib shows.

So an action heavily modified by shortening and by the way not suited to the pressures of a modern.222 cartridge.

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 26994
Loc: Beautiful British Columbia, Ca...

Re: SHORT Action Mauser '98 [Re: justcurious]
#163529 - 07/07/10 03:13 AM

As far as a Short Mauser action (not 98) for .222's? - simply the M527 CZ. Perfectly sized with single set trigger, fully adjustable in both stages and the second most accurate factory rifle made today. Savage is the first in most calibres. The CZ 527 comes in the "Euro Lux", "American" and "Varmint" models.

The action even has the inner shoulder for setting up headspace and for bottoming the threaded barrel against - same as a M98. They are clip fed- 5 round. Most of us shoot them single shot on gophers. Mine are chambered for the .17AH and .22 Hornet.

Comes in .222/.223/.204 and .17Rem., .22 Hornet and 7.62x39 I believe. There was a short run of .221 Fireballs a few years back through CZ USA. It may be out in .17 Fireball now, maybe not. That would be a nice addition to the line, along with a .17AH and .20 Fireball.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

Pages: 1

Extra information

0 registered and 359 anonymous users are browsing this forum.

Moderator: NitroX

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 6856

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact