Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Help needed - Sabatti 22-250 feed problems

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Pages: 1

Davo
.224 member

Reged: 23/03/10
Posts: 34
Loc: Northern Tablelands, NSW

Help needed - Sabatti 22-250 feed problems
#161168 - 29/05/10 04:01 PM

Hi All
Years ago I bought a 22-250 Sabatti for my wife as it is a nice light rifle with good balance. We were in Far North Queensland and did not do much hunting.

When we moved back home and started shooting larger numbers of pests it soon became evident that there was a basic design flaw with the rifle. It has a hinged floorplate and it is if the internal magazine is too large for the calibre. I showed it to one of my work mates and he suggested that maybe they had a few odd parts left over at the end of a run and "cobbled together this rifle". It is a real nuisance as it shoots beautifully, but after a couple of shots the bullets get all shuffled out of alignment and continually misfeeds

Is it possible to do any general modifications to the magazine to remedy this problem?

Cheers
Andrew

Post Extras:

CHAPUISARMES
.416 member

Reged: 16/01/08
Posts: 2908
Loc: DUBBO, NSW, AUSTRALIA

Re: Help needed - Sabatti 22-250 feed problems [Re: Davo]
#161169 - 29/05/10 04:14 PM

Hi Andrew,

The Australian agent is now SH-Shooting. www.shshooting.com.au the guy in charge is Mr Stephen Haberman 0412 300 011 he is a real nice guy but not sure if he can help as he has just started importing Sabatti but may give you a guide.

Cheers,

Jeff Gray

Post Extras:

Brithunter
.300 member

Reged: 17/03/10
Posts: 184
Loc: Lincolnshire, England

Re: Help needed - Sabatti 22-250 feed problems [Re: CHAPUISARMES]
#161194 - 30/05/10 04:35 PM

Sounds like a magazine block is missing. Common on the "short" chamberings they use one magazine case and put a block in to reduce it's length fot the shorter cartridges.

--------------------
Don't let the bastards grind you down!

Post Extras:

Davo
.224 member

Reged: 23/03/10
Posts: 34
Loc: Northern Tablelands, NSW

Re: Help needed - Sabatti 22-250 feed problems [Re: Brithunter]
#161199 - 30/05/10 10:02 PM

Thanks for that fellas.

I will take some measurements and talk to the manufacturer and see if the wrong maggazine block is in it.

Cheers
Andrew

Post Extras:

CHAPUISARMES
.416 member

Reged: 16/01/08
Posts: 2908
Loc: DUBBO, NSW, AUSTRALIA

Re: Help needed - Sabatti 22-250 feed problems [Re: Davo]
#161217 - 31/05/10 11:07 AM

Hi Davo,

If your going direct to the factory, remember that they do not understand English the way that those who have it as a main language do so I suggest as the old saying goes " A picture is worth a thousand words" take a few photos and add that to your Email.

Cheers,

Jeff Gray

Post Extras:

Davo
.224 member

Reged: 23/03/10
Posts: 34
Loc: Northern Tablelands, NSW

Re: Help needed - Sabatti 22-250 feed problems [Re: CHAPUISARMES]
#161221 - 31/05/10 02:51 PM

Thanks Jeff
I spoke to Stephen this morning and was most helpful. I am going to take a few measurements tonight and photos and he is going to see if the new magazine system will fit.

Cheers
Andrew

Post Extras:

CHAPUISARMES
.416 member

Reged: 16/01/08
Posts: 2908
Loc: DUBBO, NSW, AUSTRALIA

Re: Help needed - Sabatti 22-250 feed problems [Re: Davo]
#161224 - 31/05/10 04:58 PM

Hi Davo,

Well done, that's good, please let me know what happens.

Cheers,

Jeff Gray

Post Extras:

Davo
.224 member

Reged: 23/03/10
Posts: 34
Loc: Northern Tablelands, NSW

Re: Help needed - Sabatti 22-250 feed problems [Re: CHAPUISARMES]
#161234 - 31/05/10 10:47 PM

Hi Jeff

I just sent an email off to Stephen. For your info, with factory ammo in the magazine and the bullet sitting right back in the magazine, the nose of the projectile is 15mm back from the start of the feed ramp. To my untrained eye, it looks like there is a magazine block both at the front and rear. When speaking to Stephen, he said that they have now gone away from doing these staggered feed style magazines.

Cheers
Davo

Post Extras:

Davo
.224 member

Reged: 23/03/10
Posts: 34
Loc: Northern Tablelands, NSW

Re: Help needed - Sabatti 22-250 feed problems [Re: Davo]
#161280 - 01/06/10 06:36 PM

Hi Jeff
Just had a reply back from Stephen and he was more than helpful and very prompt with his response. PM sent.

Cheers
Andrew

Post Extras:

Pages: 1

Extra information

0 registered and 122 anonymous users are browsing this forum.

Moderator:

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4712

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact