Home | Ezine | Forums | Links | Contact
NitroExpress.com: First accuracy test with my Blaser S2

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifles

Pages: 1
cchunter
.375 member


Reged: 01/01/03
Posts: 744
Loc: Kinna, Sweden
First accuracy test with my Blaser S2
      #14354 - 05/05/04 10:23 PM

I just shot 8 rounds with my Blaser S2 in 470 NE to test accuracy and to adjust the scope with the open sights.

Result

Round 1+2+3+4, 50 meter (55 yards)

Used to sight in the scope and adjusst it to open sights.

Round 5+6 Scope 4x, 50 meter (55 yards)

13 mm cc (~1/2 inch)

Round 7+8 open sights, 50 meter (55 yards)

32 mm cc (~1 1/4 inch)

Total round 5+6+7+8 50 meter (55 yards)

47 mm cc (less than 2 inch)

All 8 shots were made within 30 mínutes and altered right barrel left barrel.

This makes me very happy, I dont think I can ask for more?

----------------------------------------------------------------------

Only problem at the moment is to move the impact point up with about 15 cm (6 inch). Hopefully I can do that with another load.

--------------------


Christer Hansson


Post Extras: Print Post   Remind Me!   Notify Moderator  
475Guy
.400 member


Reged: 22/08/03
Posts: 1088
Loc: Kali, US
Re: First accuracy test with my Blaser S2 [Re: cchunter]
      #14355 - 05/05/04 10:33 PM

CC, it all depends on whether you are using factory or hand loads. If everything else is satisfactory to you, I'd just change the front sight to raise the point of impact. I'm sure you could call them and ask for a lower front sight to regulate your rifle. Your groups are OK, so the loads must be working right.

--------------------
Lo do they call to me,
They bid me take my place among
them in the Halls of Valhalla,
Where the brave may live forever.


Post Extras: Print Post   Remind Me!   Notify Moderator  
cchunter
.375 member


Reged: 01/01/03
Posts: 744
Loc: Kinna, Sweden
Re: First accuracy test with my Blaser S2 [Re: 475Guy]
      #14358 - 05/05/04 11:15 PM

475Guy

I handload so I will try first with more powder and then see what can be done with the open sights.

--------------------


Christer Hansson


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 86 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2768

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved