Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Bell Brass

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

Pages: 1

010166
.224 member

Reged: 21/01/09
Posts: 44
Loc: Australia, Perth

Bell Brass
#138176 - 29/06/09 12:16 PM

I have been looking for brass for a .404 jeffery and have come across some BELL cases, I do not know if BELL make quality cases. Can anybody help?

Post Extras:

500Nitro
.450 member

Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia

Re: Bell Brass [Re: 010166]
#138177 - 29/06/09 12:19 PM

Yes, they are good cases.

RWS are better but BELL are good, no problems with them.

Post Extras:

470evans
.333 member

Reged: 30/03/05
Posts: 278
Loc: Texas, USA

Re: Bell Brass [Re: 500Nitro]
#138178 - 29/06/09 12:49 PM

I've used Bell in 450/400,470 and 500/465. I've gotten 10+ loads and still going in the 470 and 450/400. I've been very satisfied and would recommend it.

Post Extras:

450_EXPRESS
.333 member

Reged: 04/01/09
Posts: 341
Loc: S.C.Montana

Re: Bell Brass [Re: 470evans]
#138179 - 29/06/09 01:27 PM

Another plus vote for the BELL cases. Mine are the 450 NE, I have no complaints.

Also used the .45 and .50 BELL Basic Brass for forming the various Sharp's cases and again, good quality, no problems.

Edited by 450_EXPRESS (29/06/09 01:41 PM)

Post Extras:

010166
.224 member

Reged: 21/01/09
Posts: 44
Loc: Australia, Perth

Re: Bell Brass [Re: 450_EXPRESS]
#138187 - 29/06/09 03:03 PM

Awesome guys, thank you very much for your help.

Post Extras:

xausa
.400 member

Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA

Re: Bell Brass [Re: 010166]
#138215 - 30/06/09 02:25 AM

I used Bell .577 NE 3" cases to form my rebated rim .577 VSRE cartridge. The heavy material in the case head accepted with no problems the rather drastic machining to adapt it to a magazine rifle. The cases have stood up under repeated reloadings with no difficulty.

Post Extras:

buckeyeshooter
.275 member

Reged: 04/02/04
Posts: 54
Loc: ohio, USA

Re: Bell Brass [Re: xausa]
#138267 - 01/07/09 04:20 AM

Bell made very high quality products, get all you need and feel good!

Post Extras:

bwananelson
.400 member

Reged: 08/10/07
Posts: 1195
Loc: DELTONA FLORIDA

Re: Bell Brass [Re: buckeyeshooter]
#138279 - 01/07/09 08:46 AM

i tried looking them up they dont make brass anymore

--------------------
THERE ARE NO DO OVERS IN LIFE DONT LET A CHANCE AT A DREAM SLIP AWAY.

Post Extras:

500Nitro
.450 member

Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia

Re: Bell Brass [Re: bwananelson]
#138280 - 01/07/09 08:50 AM

Quote:

i tried looking them up they dont make brass anymore

No, you are right.

They went into maing ammo for the military, 40mm Grenades.

Much more lucrative than dealing with hunters,
especially with a few wars going on !!!

Post Extras:

AkMike
.416 member

Reged: 19/11/05
Posts: 2576
Loc: Anchorage, Alaska

Re: Bell Brass [Re: 500Nitro]
#138333 - 02/07/09 08:52 AM

They were bought out by Jamison International. They are now located is Sturgis SD.

Most of the Jamison stuff is good quality but the have sent out some poor brass on a group order once.

--------------------
"When you see that in order to produce, you need to obtain permission from men who produce nothing; when you see that money is flowing to those who deal not in goods, but in favors; you may know that your society is doomed." Ayn Rand

Post Extras:

Pages: 1

Extra information

0 registered and 27 anonymous users are browsing this forum.

Moderator: tinker

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4068

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact