Home | Ezine | Forums | Links | Contact
NitroExpress.com: Neat gun

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

Pages: 1
Caprivi
.375 member


Reged: 30/09/08
Posts: 811
Loc: America's Serengeti, Buffalo W...
Neat gun
      #130885 - 30/03/09 12:43 PM

http://www.simpsonltd.com/product_info.p...ccd6cf4b8841aef

is the 12.7x44 the same or similar to the 50/70 US ???

--------------------
To live life as it is handed to me from God


Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 9052
Loc: There's a lighthouse in the mi...
Re: Neat gun [Re: Caprivi]
      #130895 - 30/03/09 02:27 PM

the 12,7x44r is very similar and brass can be make from 50/70 ,reloading dies can be use iirc

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
88MauSporter
.375 member


Reged: 06/06/07
Posts: 530
Loc: Alaska / Texas
Re: Neat gun [Re: lancaster]
      #130931 - 31/03/09 02:46 AM

Caprivi:
I just posted a shooting session with my 12.7x44 x 16ga last week. Fung gun to shoot.
I use brass from Buffalo arms made for the caliber. It is very close to the 50/70, but the smaller in diameter. The brass i have was made from .348 win brass. I had a few cases sent to me from buffalo that were made from 8mm Label. These were too small in the base after measuring. I sent them back and they replaced them, plus 4 more. I also have some betrem brass, but haven't tried them yet.

A message about loading. I used 777 power in mine. Afte the last shooting session, I noticed I had a little trouble opening the gun on one shot. I examined the primers and found they were pushing into the firing pin hole. Scared me. I looked at previous loading and the primers were not deformed like this.
I took the rest of the loaded cases and pullet the bullets and found that I had over compressed, somehow, the power. In some cases it was a solid mass.
The warnings from Hogdens is to NOT compress. I believe I spiked pressure with the compression. I must have miss judged the powder and seating depth.
I am backing away from the 777 until I figure out what happened. I will likely switch to black or 4198 loads.

This is a great gun to shoot and handle. I have an HVA M 17B SXS hammer gun.

--------------------
"A hunter should not use a rifle that will kill an animal when everthing goes right; you should use one that will do the job when everything goes wrong." 88MauSporter


Post Extras: Print Post   Remind Me!   Notify Moderator  
Caprivi
.375 member


Reged: 30/09/08
Posts: 811
Loc: America's Serengeti, Buffalo W...
Re: Neat gun [Re: 88MauSporter]
      #130934 - 31/03/09 02:55 AM

Great info. Did you get yours from Simpson's ???? They have a few plus some 16x20/577. Also a few in 9(???)x 57/360 with 12 and 16ga gun barrels. Very cool.

--------------------
To live life as it is handed to me from God


Post Extras: Print Post   Remind Me!   Notify Moderator  
Caprivi
.375 member


Reged: 30/09/08
Posts: 811
Loc: America's Serengeti, Buffalo W...
Re: Neat gun [Re: 88MauSporter]
      #130935 - 31/03/09 02:58 AM

Forgot to say, yes, I followed your thread on the 12.7, very nice, very informative. I like the idea of one of these as a forest gun. Shot and a big slug are intriguging.

--------------------
To live life as it is handed to me from God


Post Extras: Print Post   Remind Me!   Notify Moderator  
88MauSporter
.375 member


Reged: 06/06/07
Posts: 530
Loc: Alaska / Texas
Re: Neat gun [Re: Caprivi]
      #130938 - 31/03/09 03:26 AM

No, not from Simpsons. i bought mine a couple years ago. This is a Husqvarna underlever.
The 9.3x57 / 360 is a nice round as well. It is mild. About like a .38-55. The cases can be made from the british .360 or short ones from .30-30 from what i am told.

The 12.7 will shoot better than what I had on the targets. I was shooting just to see if the barrels came close togehter.
Thanks.

--------------------
"A hunter should not use a rifle that will kill an animal when everthing goes right; you should use one that will do the job when everything goes wrong." 88MauSporter


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 27014
Loc: Beautiful British Columbia, Ca...
Re: Neat gun [Re: 88MauSporter]
      #130956 - 31/03/09 08:04 AM

Here's mine - left 16 bore shot for paper or plastic, right is 13 bore ball w/brass case, straight rifled. 1 1/2" at 28 yards offhand for 1st 5 in a row, then tended to string an inch to the right. It was -10 and windy, too cold to shoot more. Haven't shot the left barrel yet , but picked up a mould to try RB in it as well .



Maybe I'll get lucky with the next one, a 16bore by 12.7x44R- it's what I want for a moose/grouse gun with a bot more range than the 13 bore ball without spin. I do need to try it farther out, now. Spring may come sometime and I've got a lot of ammo prepared for testing- bare ball as well as undersized, cloth patched - both in brass cases. Buffalo Arms is GREAT!!!

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Edited by Daryl_S (31/03/09 08:08 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
88MauSporter
.375 member


Reged: 06/06/07
Posts: 530
Loc: Alaska / Texas
Re: Neat gun [Re: DarylS]
      #130967 - 31/03/09 11:43 AM

Daryl<
Very nice gun. I don't have a place at the moment to shoot at less than 50 meters. I intend to bring this to a boar hunt this weekend. It will be my second gun. I will use my Husky 9.3 M46 first. Then this.
Loved the moose story and read the posts about your shooting the 13 bore. Great stuff. Wonderful guns from another age.

--------------------
"A hunter should not use a rifle that will kill an animal when everthing goes right; you should use one that will do the job when everything goes wrong." 88MauSporter


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
2 registered and 96 anonymous users are browsing this forum.

Moderator:  Huvius 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4134

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved