Home | Ezine | Forums | Links | Contact
NitroExpress.com: 12 ga sizing dies

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
470evans
.333 member


Reged: 30/03/05
Posts: 278
Loc: Texas, USA
12 ga sizing dies
      #111330 - 08/08/08 01:05 PM

Anyone know where to get dies to size .740 cast paradox bullets down to .734 -.736?

Thanks

Post Extras: Print Post   Remind Me!   Notify Moderator  
rigbymauser
.400 member


Reged: 15/05/05
Posts: 1972
Loc: Denmark
Re: 12 ga sizing dies [Re: 470evans]
      #111336 - 08/08/08 02:41 PM

Quote:

Anyone know where to get dies to size .740 cast paradox bullets down to .734 -.736?

Thanks



You may just have to go to a local workshop and have a simple tube made, where you can punch them dowm with a rod that are just a little smaller a la .720cal.

Post Extras: Print Post   Remind Me!   Notify Moderator  
szihn
.400 member


Reged: 24/06/07
Posts: 2121
Loc: United States
Re: 12 ga sizing dies [Re: rigbymauser]
      #111337 - 08/08/08 03:22 PM

It's easy to make one out of a 7/8"X14 bolt.
e-mail me if you need help
szihn@wyoming.com

Post Extras: Print Post   Remind Me!   Notify Moderator  
CowboyCS
.333 member


Reged: 05/10/07
Posts: 386
Loc: Kansas u.S.A.
Re: 12 ga sizing dies [Re: szihn]
      #111342 - 08/08/08 08:48 PM

That's what I was gonna say, except I was gonna add that if he didn't want to or couldn't do it, I would do it for him.

C

--------------------
The Bill of Rights- Void were prohibited by law
Stolzer & Son's Gunsmithing

Post Extras: Print Post   Remind Me!   Notify Moderator  
sbs470
.333 member


Reged: 15/04/04
Posts: 378
Loc: Sheffield Tasmania
Re: 12 ga sizing dies [Re: CowboyCS]
      #111345 - 08/08/08 09:14 PM

I have made several out of grade 8 bolts as szihan has suggested in different sizes .They work fine.

good shooting
sbs470

Post Extras: Print Post   Remind Me!   Notify Moderator  
bouldersmith
.375 member


Reged: 23/03/06
Posts: 627
Loc: Boulder Colorado
Re: 12 ga sizing dies [Re: sbs470]
      #111346 - 08/08/08 10:03 PM

.875" minus .735", minus thread depth x 2= makes for some damn thin walls....you may look into using an over size die.....ask me how I know....I too have a 12 bore paradox. It is a special made Item as far as I know. I turned mine.
Steve

--------------------
New website http://www.bertramandco.com

Post Extras: Print Post   Remind Me!   Notify Moderator  
sbs470
.333 member


Reged: 15/04/04
Posts: 378
Loc: Sheffield Tasmania
Re: 12 ga sizing dies [Re: bouldersmith]
      #111409 - 09/08/08 09:53 PM

I have four of the bolts which I bored out then had them honed by a guy to my final sizes..732,730,729 and 728. I turned the push ram at .725.By using a grade 8 or CAT bolt wall thickness is not a problem and when screwed into a RCBS Big Max press the walls are well suported.Lets remeber that we are swaging lead.I machine a lead into the bolt head so the bullet centres in the die.
The reason I have had to go through this exercise of swaging bullets is that I don't own a paradox.I have a A.Hollis with invisable rifling or Lancasters patent oval bore.I have had to do a lot of swaging ,load development and casting of various lead tin ratios to get the rifle shooting,not to mention wads.powder and bullet lubes.Without a large lube cookie the barrels lead up quickly and the invisible becomes very visible I cast two bullets both are CBE moulds.one is a traditional Fosbery bullet and the other is a bluff nose ,both are hollowpoint and weigh 750 gr subject to lead tin mix and measure 735 & 734

good shooting
sbs470

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 75 anonymous users are browsing this forum.

Moderator:  tinker 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3038

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved