Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: singleshot action for gauge calibers

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

Pages: 1

rigbymauser
.400 member

Reged: 15/05/05
Posts: 1972
Loc: Denmark

singleshot action for gauge calibers
#82014 - 08/07/07 04:17 AM

I wonder if one should make a 10 bore singleshot rifle, which action could be used?

Post Extras:

Print Post

Remind Me!

Notify Moderator

ALAN_MCKENZIE
.400 member

Reged: 24/03/04
Posts: 1214
Loc: Western Australia

Re: singleshot action for gauge calibers [Re: rigbymauser]
#82029 - 08/07/07 10:55 AM

The Greener GP martini action shotgun in 12 gauge is what I have.
Very strong action.
Brass and ammo is more readily available for the 12 bore.
Al

--------------------
"Dogs always bark at their master"
Sir Seretse Khama.25th June 1949

Post Extras:

Print Post

Remind Me!

Notify Moderator

450_Ackley
.375 member

Reged: 06/02/03
Posts: 583
Loc: Darling Downs, Qld Australia

Re: singleshot action for gauge calibers [Re: ALAN_MCKENZIE]
#82035 - 08/07/07 02:09 PM

Alan,
What brand of brass cases are you using, I have found a maker in the U.S that will make them according to your chamber cast and to what bullet diameter you are using, therefore no sizing needed. Does custom headstamps as well.
My bore gun, also built on a GP Greener should be "home" this coming week, can't wait to get started with a load development program.

Regards,
David

Post Extras:

Print Post

Remind Me!

Notify Moderator

rigbymauser
.400 member

Reged: 15/05/05
Posts: 1972
Loc: Denmark

Re: singleshot action for gauge calibers [Re: 450_Ackley]
#82037 - 08/07/07 05:30 PM

Quote:

Alan,
What brand of brass cases are you using, I have found a maker in the U.S that will make them according to your chamber cast and to what bullet diameter you are using, therefore no sizing needed. Does custom headstamps as well.
My bore gun, also built on a GP Greener should be "home" this coming week, can't wait to get started with a load development program.
Regards,
David

Can I ask who does the brass for you?

Post Extras:

Print Post

Remind Me!

Notify Moderator

ALAN_MCKENZIE
.400 member

Reged: 24/03/04
Posts: 1214
Loc: Western Australia

Re: singleshot action for gauge calibers [Re: rigbymauser]
#82040 - 08/07/07 09:09 PM

I bought my brass through Dave Gullo at Buffalo Arms in the US.
The brand is Magtech.
I would be interested to find out where you are getting your custom brass from.

--------------------
"Dogs always bark at their master"
Sir Seretse Khama.25th June 1949

Post Extras:

Print Post

Remind Me!

Notify Moderator

rigbymauser
.400 member

Reged: 15/05/05
Posts: 1972
Loc: Denmark

Re: singleshot action for gauge calibers [Re: ALAN_MCKENZIE]
#82051 - 08/07/07 11:22 PM

Quote:

I bought my brass through Dave Gullo at Buffalo Arms in the US.
The brand is Magtech.
I would be interested to find out where you are getting your custom brass from.

Oh Dave..
I have done business with Dave since he started his business...Good guy for sure

I will buy my brass from "Rocky Mountain Cartridge" who will make up my 10 Bore 3.25" for my also upcomming Manton & Co 10bore. I asked around here friday from people who are in business with doublerifles as pro, they all vouched 100% for their brass. I spoke with Paul Roberts, who made up a
.775Rigby doublerifle in the midt 90´s new spoke only well of RMC.
RMC will charge me $85 for 10 pcs of 10bore 3.25", which I don`t think are bad.
Dieter Horneber from germany will next year make brass for the old gauge calibers, starting with the 4bore....later the others

.
I can only say Dieter Horneber makes the best...my.333 Jeffery Rimless brass are pure gold...hahaha.

Post Extras:

Print Post

Remind Me!

Notify Moderator

DarylS
.700 member

Reged: 10/08/05
Posts: 27000
Loc: Beautiful British Columbia, Ca...

Re: singleshot action for gauge calibers [Re: rigbymauser]
#82058 - 08/07/07 11:46 PM

www.trackofthewolf.com also has 12 and other bore brass.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

Print Post

Remind Me!

Notify Moderator

450_Ackley
.375 member

Reged: 06/02/03
Posts: 583
Loc: Darling Downs, Qld Australia

Re: singleshot action for gauge calibers [Re: ALAN_MCKENZIE]
#82088 - 09/07/07 08:37 AM

Alan,
RMC (Rocky Mountain Cartridge) is where I will be getting it from, cost $45-00 US for 10 cases, made to your dimensions as per chamber cast, and your own headstamp if you wish, he also cuts it to the length of your chamber.
Look him up at www.rockymountaincartridge.com

Regards,
David.

Post Extras:

Print Post

Remind Me!

Notify Moderator

Omnivorous_Bob
.333 member

Reged: 03/10/05
Posts: 286
Loc: Montana

Re: singleshot action for gauge calibers [Re: 450_Ackley]
#82111 - 09/07/07 09:44 PM

I‘ll also vouch for RMC brass. Absolutely outstanding. It’s turned brass, but at bore gun pressures the strength is not an issue. It does use a lot of material though, and metal prices are through the roof in the last 2 years. I’m impressed he’s kept his prices as low as they are for a custom product. When you consider that it is made for your chamber and will virtually never wear out it is a steal.

Brass for my papercase 10 bore 2 5/8 was surprisingly an off the shelf item and arrived in a few days. Being as thick as a normal paper shell, they’ll never need resizing.

I ordered 30 cases when I got my gun and have lost track of how many roundballs they’ve launched. For my thin brass 4 he made the first .8” of the case .0004” thick (to hold the bullet), then it increased to .03” thick and greater. Same result, no resizing needed. Plus, he has the measurements from my cast on file if I ever do want more.

450, please make a post when you receive your Greener. I recently acquired one those with a similar project in mind for this winter, and would love to hear your advice and ideas. I'd love to see and hear any detailsyou have the time to share too Alan! Thanks.

Bob

--------------------
"If we're not supposed to eat animals, how come they're made out of meat?"

Edited by Omnivorous_Bob (09/07/07 09:55 PM)

Post Extras:

Print Post

Remind Me!

Notify Moderator

Tatume
.400 member

Reged: 09/06/07
Posts: 1091
Loc: Gloucester, Va USA

Re: singleshot action for gauge calibers [Re: Omnivorous_Bob]
#82114 - 09/07/07 09:59 PM

> he made the first .8” of the case .0004” thick

Could you have meant 0.004" thick (pesky decimals!)? Even then, that's pretty thin. Take care, Tom

Post Extras:

Print Post

Remind Me!

Notify Moderator

Omnivorous_Bob
.333 member

Reged: 03/10/05
Posts: 286
Loc: Montana

Re: singleshot action for gauge calibers [Re: Tatume]
#82115 - 09/07/07 10:31 PM

You got me! I meant .004" I was impressed you could turn brass so thin and precisely.

Bob

--------------------
"If we're not supposed to eat animals, how come they're made out of meat?"

Post Extras:

Print Post

Remind Me!

Notify Moderator

450
.300 member

Reged: 30/12/06
Posts: 199
Loc: Melbourne,Victoria, Australia

Re: singleshot action for gauge calibers [Re: Omnivorous_Bob]
#82666 - 19/07/07 07:55 PM

David,Alan.

Bertram Bullets of Seymour Victoria makes 12 bore brass cases and they are about $2.20 each. Ihave used them with great success. Putting a very light crimpon them to hold the slugs in is still causing me problems. Ihave loaded up to 150 grains of black powder for good accuracy in my 12 bore slugmaster. His details are on the web.

Wayne

--------------------
The worst days shooting and hunting is better than the best day at work

Post Extras:

Print Post

Remind Me!

Notify Moderator

DarylS
.700 member

Reged: 10/08/05
Posts: 27000
Loc: Beautiful British Columbia, Ca...

Re: singleshot action for gauge calibers [Re: 450]
#82688 - 20/07/07 04:44 AM

Way to go four five ough (Wayne). I used up to 7 drams in my double 12 with 24" (or maybe 26"??) tubes with round balls. The increase in recoil was memorable and although accuracy was supurb, the recoil was a bit too much in the light gun. I found that by using 4756 and 7625, I could match the speed and accuracy with hardly more recoil than standard slug loads, very easy to shoot.
; Sorry about the link to track. I just checked and bore brass is no longer listed, that I could find, anyway. I've sent an e-mail requesting confirmation on stock of that item.
: I should think that those who can get Hodgdon's Longshot powder, should try it out. Hodgdon's data lists 1-1/4 ounce shot loads to be pushed close to 1,600fps at failry low pressure of around 8,000psi. If that is so, then 1,600fps is easily available to us using solid round balls. One need only adjust the wad column to compensate for proper crimp, whatever one is using.
: NOTE - As with any handloading of ammunition, one must start low and 'develop' ones own data as to how the pressure is developed and handled by one's own firearm. Use of someone else's data without first 'developing' up to it, may not the a safe way to load. Be careful out there.

Edited by Daryl_S (20/07/07 05:00 AM)

Post Extras:

Print Post

Remind Me!

Notify Moderator

Pages: 1

Extra information

0 registered and 15 anonymous users are browsing this forum.

Moderator: tinker

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4395

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved