Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: .360 2-1/4" Brass wanted

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Pages: 1

1980E26
.300 member

Reged: 03/05/05
Posts: 195
Loc: USA

.360 2-1/4" Brass wanted
#49771 - 12/02/06 05:01 AM

I am looking for 306 2-1/4" brass or loaded ammo. Does anyone have brass for sale or know where it is for sale?

Post Extras:

Sandgroper
.224 member

Reged: 30/07/07
Posts: 5
Loc: Narrogin, Western Australia

Re: .360 2-1/4" Brass wanted [Re: 1980E26]
#86798 - 08/10/07 08:19 PM

.360 21/4" brass is made by Bertram in Australia and is available from Jansa Antique Arms.

http://www.hotkey.net.au/~jansa/simplex-brass-cases.html

Post Extras:

Sparky
.224 member

Reged: 02/03/08
Posts: 14
Loc: Idaho, USA

Re: .360 2-1/4" Brass wanted [Re: Sandgroper]
#98179 - 03/03/08 10:07 AM

.360 2 1/4 cases were available at www.buffaloarms.com made from Rem 30-40 Krag brass, but not listed in last catalog. I have 160+ .360 2 1/4 cases I made from Rem 30-40 Krag brass that has .053" rim thickness instead of .046 as most of the books state. After I made these cases I found the chambers in my Wm. Moore & Grey are 2 5/16", so I made new longer ones. The base dia. is .434" witch slightly larger than the books call out. These cases have been fired about 4 times with BP ,washed & cleaned with walnut hulls. They are for sale.

Post Extras:

Pages: 1

Extra information

0 registered and 271 anonymous users are browsing this forum.

Moderator:

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2126

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact