Home | Ezine | Forums | Links | Contact
NitroExpress.com: .470 Capstick

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
iwantadouble
.300 member


Reged: 06/06/05
Posts: 104
Loc: Gallatin County, Montana
.470 Capstick
      #46003 - 07/01/06 06:55 PM

Does anyone have any experience with this cartridge? The fact that its based off the .375 case is a definate plus in terms of producing ammo relatively cheaply, but are there any issues to it that I am missing.

I wouldn't imagine headspacing would be a real problem with the belted case, but I would appreciate input one way or the other from someone who has had more experience with it. As far as performance on game, any remarks on its effectiveness would as be equally appreciated.

--------------------
500 is a nice round number, either followed by "Nitro Express" or by "cubic inch displacement".

Post Extras: Print Post   Remind Me!   Notify Moderator  
500grains
.416 member


Reged: 16/02/04
Posts: 4732
Loc: Salt Lake City, Utah USA
Re: .470 Capstick [Re: iwantadouble]
      #46072 - 08/01/06 03:09 PM

If you PM me your mailing address, I will burn a 470 capstick article onto CD and mail it to you.

Post Extras: Print Post   Remind Me!   Notify Moderator  
new_guy
Sponsor


Reged: 10/08/04
Posts: 581
Loc: Texas
Re: .470 Capstick [Re: iwantadouble]
      #46075 - 08/01/06 03:40 PM

I think the 470 capstic would be a fine round - if kept to ballistic equivilent of the 470NE. Problem is, everyone (including art alphin) wants to push it beyond the magic 2150fps mark.

Why??? What's the 470 at 2150 done so poorly in the past 99-years that warrants improvement with more velocity?

The slowest (and lowest pressure load) listed in Any Shot You Want is a 500gr bullet at 2283fps and at 49KPSI. I think lowering the velocity by 100fps would probably reduce the pressure by 5K and make it a worry-free round.

The fastest (and higest pressure load) listed in the same book is around 2400fps and 60KPSI.

IMO, I just don't see the need to push a 475 bullet beyond the tried and true 2150 mark. I think if you load one to those velocities, it is a cartridge with which you should have no problems.

Bullets are available and brass is easy to come by in it's cylindrical form.



--------------------
www.heymUSA.com

Post Extras: Print Post   Remind Me!   Notify Moderator  
470Cap
.224 member


Reged: 24/12/05
Posts: 11
Loc: Victoria, Australia
Re: .470 Capstick [Re: new_guy]
      #46080 - 08/01/06 04:37 PM

I've got a Capstick built on a Rem700 action with Lothar 24" barrel. When built, it was deliberately made light at 4kg so that it could be carried all day. A mild load of 80gr AR2208 (Varget) behind the 500gr Woodleigh will get your attention. Rifle will be Magna-ported in the coming months to reduce recoil and muzzle flip and barrel length reduced to 22". Haven't chronographed it yet but I want 2100fps and no more. I see no reason to chase 2400fps in a light rifle.
I'm using CH/4D dies and I'm not ready to happily endorse them yet, resizing seems to be harder than it should and I still cant work out whether they crimp or not. I'm waiting on some Speer 400gr GoldDot projectiles to start working on reduced plinking loads at essentially 45/70 velocities.
Biggest hassle found so far is getting .475cal pilots for trimmers etc...
Cheers...

Post Extras: Print Post   Remind Me!   Notify Moderator  
iwantadouble
.300 member


Reged: 06/06/05
Posts: 104
Loc: Gallatin County, Montana
Re: .470 Capstick [Re: 470Cap]
      #46092 - 09/01/06 12:39 AM

In regards to the 2400fps with 500gr bullet, it seems a little questionable to me as far as having a decent reasoning to its justification. There comes a point, from my understanding anyway, where velocity starts giving diminishing returns on its effect with larger bullets. Point being the .460 Weatherby vs. say one of the .450 Nitro Expresses. Seems to be for paper punching chronographing to develope velocity induced muzzle energy bragging rights or beyond sane shooting distances is all. It would be interesting for shoulder abuse and back readjustment theropy, but if I were to take it on game, I personally would want the bullet flying as close to the velocity as it was originally intended to be used at (.470NE levels of 2150fps in this case). At 2283fps and 49,000PSI, Any Shot's loading makes me wonder. Could you load it down anymore, or would you start encountering lower loading pressure spikes?

500grains, you have a pm as well. Thank you again.

--------------------
500 is a nice round number, either followed by "Nitro Express" or by "cubic inch displacement".

Post Extras: Print Post   Remind Me!   Notify Moderator  
new_guy
Sponsor


Reged: 10/08/04
Posts: 581
Loc: Texas
Re: .470 Capstick [Re: iwantadouble]
      #46105 - 09/01/06 03:02 AM

Yes, you could load it down more. The loads for this round have the relatively small case crammed full of fast-burning powders to achieve these velocities. So there would be no worries about pressure spikes.

Pressure spikes would be a concern if you're reducing a slow-burning powder by a great deal in an already large-for-bore case.


--------------------
www.heymUSA.com

Post Extras: Print Post   Remind Me!   Notify Moderator  
iwantadouble
.300 member


Reged: 06/06/05
Posts: 104
Loc: Gallatin County, Montana
Re: .470 Capstick [Re: new_guy]
      #46111 - 09/01/06 03:48 AM

That makes it a relative snap then. Just setup a chrono and start cutting back on powder charges until getting in the 2,150fps range. Would IMR4350 be too slow of a burning powder for use in the Capstick? It is my prefered powder in .30-06, and .375H&H, and if the Capstick can run happily with it a lowered velocity, it would make stocking powders as easy as can be for me if I were to entertain my thoughts with the round. (Just 4350 for rifles and 2400 for handguns.)

--------------------
500 is a nice round number, either followed by "Nitro Express" or by "cubic inch displacement".

Post Extras: Print Post   Remind Me!   Notify Moderator  
470Cap
.224 member


Reged: 24/12/05
Posts: 11
Loc: Victoria, Australia
Re: .470 Capstick [Re: iwantadouble]
      #46132 - 09/01/06 07:02 AM

The 4350 series of powders are too slow for the Capstick and are not what I'd be wanting to use for a "reduced load" where you just start cutting back until you get your desired velocity. I'd be looking more towards the H4895 burning rate powders for that task.
Cheers...

Post Extras: Print Post   Remind Me!   Notify Moderator  
500grains
.416 member


Reged: 16/02/04
Posts: 4732
Loc: Salt Lake City, Utah USA
Re: .470 Capstick [Re: 470Cap]
      #46159 - 09/01/06 11:57 AM

I have hit 2350 fps with IMR4064 and no pressure problem.

Post Extras: Print Post   Remind Me!   Notify Moderator  
iwantadouble
.300 member


Reged: 06/06/05
Posts: 104
Loc: Gallatin County, Montana
Re: .470 Capstick [Re: 500grains]
      #46543 - 13/01/06 11:45 PM

500grains, I recieved the article. Excellent penmanship on top of being loaded with a wealth of knowledge. It looks as if my plans for the .425 Westley Richards will be post-poned. I've got to have one of these, and while the motivating factor originally was to consider it instead of the .425 due to feeding, after taking a look at those groups, my reasoning changed. I wasn't aware that it had a ghost shoulder on it, but now knowing that, I like it more.

Thank you again, and I will try to find something worth while to ship back as a token of my gratitude.

--------------------
500 is a nice round number, either followed by "Nitro Express" or by "cubic inch displacement".

Post Extras: Print Post   Remind Me!   Notify Moderator  
500grains
.416 member


Reged: 16/02/04
Posts: 4732
Loc: Salt Lake City, Utah USA
Re: .470 Capstick [Re: iwantadouble]
      #46550 - 14/01/06 02:18 AM

iwant,

I am glad you like the article. No need to send anything in return. Good luck with the rife!

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
1 registered and 190 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3010

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved