Home | Ezine | Forums | Links | Contact
NitroExpress.com: Drilling with sleeved small calibur rifle barrel

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
pheasantfinder
.224 member


Reged: 05/12/05
Posts: 5
Loc: Northern Indiana
Drilling with sleeved small calibur rifle barrel
      #44386 - 19/12/05 12:27 PM

I'm looking for a drilling to hunt small game and there seems to be very few around with 222 or 22 Savage rifle barrels. Is it possible to buy a older drilling with a larger rifle barrel say 8x57JR or 9.3x72R and have the barrel sleeved to 222? If so, who would do this job? Thanks for your help.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Chasseur
.375 member


Reged: 18/11/03
Posts: 771
Loc: Hunting classic Indian game!
Re: Drilling with sleeved small calibur rifle barrel [Re: pheasantfinder]
      #44388 - 19/12/05 01:11 PM

PF:
I've seen many older drillings with the rifles barrels already sleaved to some small bore caliber (22 of some sort, or an old Western caliber like 32 something). I bet a lot of war trophies came back to the US and metric rimmed ammunition was not availible so they had the rifle barrels sleaved. They should not be too hard to find. In fact I have the opposite problem I'd like an older drilling but with the larger rifle caliber and many of the ones I've seen were sleaved!! Take a look at Gunsamerica.

Edit:

Pheasantfinder I am sorry I misunderstood your post abit. You are asking about sleeving a drilling, rather than finding one with a sleeved barrel. Oops. Sure its possible. Though my inclination is to leave the existing drillings in their original caliber, but to each their own with their own guns. Have you thought of a combination gun? I've seen some with 222 rifle barrels if memory serves me correctly. Just a thought.

--------------------
In regards to action he should devote himself to hunting...
-Machiavelli



Edited by Chasseur (19/12/05 02:27 PM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
davem3
.300 member


Reged: 10/02/04
Posts: 121
Loc: birmingham,al usa
Re: Drilling with sleeved small calibur rifle barrel [Re: pheasantfinder]
      #44390 - 19/12/05 02:43 PM

Your location would help a lot in suggesting a gunsmith for the job. Dave

Post Extras: Print Post   Remind Me!   Notify Moderator  
pheasantfinder
.224 member


Reged: 05/12/05
Posts: 5
Loc: Northern Indiana
Re: Drilling with sleeved small calibur rifle barrel [Re: davem3]
      #44391 - 19/12/05 04:18 PM

I'm located in Northern Indiana, thanks!

Post Extras: Print Post   Remind Me!   Notify Moderator  
luv2safari
.400 member


Reged: 09/11/03
Posts: 1408
Loc: United States
Re: Drilling with sleeved small calibur rifle barrel [Re: pheasantfinder]
      #44393 - 19/12/05 04:35 PM

Find one in extra good condition in a bastard rifle caliber like one of the rimmed Sauer or Collath calibers to have the sleeve work done. You can get these much cheaper than a 9,3X72R or 8X57JR.

If rifle ammo is not readily available, the price goes way down, providing the seller has any common sense.



--------------------
Hunt with Class and Classics

Post Extras: Print Post   Remind Me!   Notify Moderator  
trmungle
.224 member


Reged: 16/02/05
Posts: 11
Loc: Juneau Alaska
Re: Drilling with sleeved small calibur rifle barrel [Re: luv2safari]
      #44396 - 19/12/05 06:40 PM

You can always fit a small caliber rifle barrel to one of the shotgun tubes to your drilling. I have them in 22 lr, 22 mag and 22 hornet. Work very well and you can remove and replace them without losing zero. Tom

Post Extras: Print Post   Remind Me!   Notify Moderator  
Robie
.275 member


Reged: 04/04/03
Posts: 61
Re: Drilling with sleeved small calibur rifle barrel [Re: pheasantfinder]
      #44415 - 20/12/05 06:23 AM

In Europe insert-barrels is popular www.einstecklauf.de especially for Krieghoff, Merkel (up to 5,6x52) and in some occassion Blaser.
The 5,6x52R and 5,6x50R mag is close to 222 Rem in performance. Krieghoff Optima accept even 9,3x74R.

Robie J.


Post Extras: Print Post   Remind Me!   Notify Moderator  
luv2safari
.400 member


Reged: 09/11/03
Posts: 1408
Loc: United States
Re: Drilling with sleeved small calibur rifle barrel [Re: trmungle]
      #44416 - 20/12/05 06:24 AM

I've had, or now have various types of inserts. I have settled on the Kreighoff shotgun barrel insert in 22mag. It is sufficiently accurate and Hits with a bit of authority. Ammo is inexpensive and easy to carry. A gunsmith familiar with drillings can alter the flip up sight to stay up with the rifle barrel de-selected, so you can use the right barrel with the insert, the rear sight, and the set trigger.

My inserts are all the longer rimfire type, about 12" or so. The shorter barrel inserts are far better to carry in the field, however, and I may have mine bobbed about 4-5".

The full length inserts in centerfire calibers are accurate, but are also not as convenient if you want to use both shotgun barrels frequently during the hunt. I got rid of mine in 22 Hornet and 222 Rem for that reason.

--------------------
Hunt with Class and Classics

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 94 anonymous users are browsing this forum.

Moderator:  Huvius 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3368

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved