Home | Ezine | Forums | Links | Contact
NitroExpress.com: Custom Barreling ???

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Pages: 1
AkMike
.416 member


Reged: 19/11/05
Posts: 2576
Loc: Anchorage, Alaska
Custom Barreling ???
      #43317 - 07/12/05 10:40 AM

I have an Alex Henry falling block 450 3 1/4 with a very light 29 1/2" tube.The shallow Herny rifleing looks terrible and very dark.I haven't fired it because of the cost to gear up to the 450 ctg.but I assume it won't shoot too well.
I am considering having a new barrel fitted to match the origional contures. Relining is out according to Redmans relining service of Omak, Wash. because of the very small diameter of the barrel.
Can anyone suggest a gunsmith capable of duplicating the origional barrel with the flats at the breech.
Thanks
AkMike

--------------------
"When you see that in order to produce, you need to obtain permission from men who produce nothing; when you see that money is flowing to those who deal not in goods, but in favors; you may know that your society is doomed." Ayn Rand


Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3592
Loc: Darwin, Top End of Australia
Re: Custom Barreling ??? [Re: AkMike]
      #43333 - 07/12/05 12:05 PM

Can't recommend anyone on your side of the pond, Mike, but if you wish to retain the flats and proof-marks, it should be possible to 'sleeve' a new barrel into the lopped breech-end of the existing barrel, similar to a sleeved shotgun.

I'd get a second opinion on the relining first, though.

...also, try shooting the rifle with soft jacketed bullets, even if you have to borrow the components: you might be surprised. It may shoot OK even though the bore looks terrible, and it will almost certainly 'improve' (at least visually!) with the passage of a couple of hundred jacketed bullets. Tinker has tested the Hornady 350gr SP for relative softness and pronounced it OK for older barrels like your Henry.

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au


Post Extras: Print Post   Remind Me!   Notify Moderator  
500Nitro
.450 member


Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia
Re: Custom Barreling ??? [Re: AkMike]
      #43334 - 07/12/05 12:10 PM


AkMike

Because it doesn't have nice smooth lines, Henry rifling often
looked dark and horrible even though it was OK.

Try shooting it.

As to rebarrelling, their is a guy in NZ who can do it easily
and well - ex Purdey, qualified gunsmith.

PM me if you want more info and I'll look up the details.

500 Nitro


Post Extras: Print Post   Remind Me!   Notify Moderator  
AkMike
.416 member


Reged: 19/11/05
Posts: 2576
Loc: Anchorage, Alaska
Re: Custom Barreling ??? [Re: 500Nitro]
      #43335 - 07/12/05 12:14 PM

Thanks Guys. Here's a pic of the breech area with the flats. web page I'll see if I can round up some brass and try it out some but it doesn't look very good inside.

--------------------
"When you see that in order to produce, you need to obtain permission from men who produce nothing; when you see that money is flowing to those who deal not in goods, but in favors; you may know that your society is doomed." Ayn Rand


Post Extras: Print Post   Remind Me!   Notify Moderator  
Otto
.300 member


Reged: 15/09/05
Posts: 111
Loc: Arizona, USA
Re: Custom Barreling ??? [Re: AkMike]
      #43378 - 08/12/05 12:06 AM

Mike, John Wills at John's Workshop is a superb smith in Anchorage who does wonderful things with classic single shots. Take your rifle and go see John.

Otto


Post Extras: Print Post   Remind Me!   Notify Moderator  
AkMike
.416 member


Reged: 19/11/05
Posts: 2576
Loc: Anchorage, Alaska
Re: Custom Barreling ??? [Re: Otto]
      #43403 - 08/12/05 04:31 AM

John has seen it before and you're right he is a wizard with a single shot. Thanks Otto.

--------------------
"When you see that in order to produce, you need to obtain permission from men who produce nothing; when you see that money is flowing to those who deal not in goods, but in favors; you may know that your society is doomed." Ayn Rand


Post Extras: Print Post   Remind Me!   Notify Moderator  
nitro476
.300 member


Reged: 21/10/04
Posts: 120
Re: Custom Barreling ??? [Re: AkMike]
      #44213 - 17/12/05 09:31 AM

Try Steven Heilmann in Grass Valley, CA. his email is sheilmann@jps.net


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
1 registered and 87 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2046

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved