Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Reduced loads for 9.5x56 MS

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Pages: 1

85lc
.400 member

Reged: 19/01/18
Posts: 1105
Loc: Georgia, USA

Reduced loads for 9.5x56 MS
#389774 - 18/02/25 11:28 AM

Does anyone have reduced loads that they use for their 1910 MS in 9.5x56? It seems that all the load information that I can find are full power loads. I am looking for a load that is in say the 1200 - 1500 fps with say Unique or 4198. This is more a "pinking" load,

--------------------
RB

Post Extras:

Jim_C
.300 member

Reged: 09/08/14
Posts: 178
Loc: USA

Re: Reduced loads for 9.5x56 MS [Re: 85lc]
#389779 - 18/02/25 02:22 PM

With a 250 grain cast bullet, I started at 14.0 gr. 2400 and worked up. My notes say I stopped at 17.0 grains 2400. Accuracy was OK, but the mould I had was for a 38/55: the bullets didn't want to feed smoothly. I traded the rifle off soon after, before finding a round-nosed mould.

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 27343
Loc: Beautiful British Columbia, Ca...

Re: Reduced loads for 9.5x56 MS [Re: Jim_C]
#389795 - 19/02/25 07:11 AM

An easier load would be to use Trail Boss. 70% case full(to the bottom of the bullet) will likely give 1,000fps to maybe 1,100fps - jacketed or cast, no matter.
A full load, that is non-compressed 100% load to the bottom of the bullet could give 1,300fps.
My .375/06IMP with a 100% load to the bottom of a seated 310gr. cast bullet, gave 1,385fps.

Using Trail Boss in necked cases, seems to give higher vel. than the same 70% and 100% loads in straight cases.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

85lc
.400 member

Reged: 19/01/18
Posts: 1105
Loc: Georgia, USA

Re: Reduced loads for 9.5x56 MS [Re: DarylS]
#389820 - 20/02/25 02:56 AM

Jim & Daryl,

Thanks for the info. I will try both.

--------------------
RB

Post Extras:

Pages: 1

Extra information

0 registered and 172 anonymous users are browsing this forum.

Moderator: CptCurl

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 176

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact