Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Unknown Large Diameter Bullet Mold

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

Pages: 1

JohnBoy
.224 member

Reged: 01/08/20
Posts: 1
Loc: New Jersey -USA

Unknown Large Diameter Bullet Mold
#344007 - 04/08/20 05:57 AM

Rapine 730550 HB 555gr
Any idea what rifle this mold is for?
The mold is not on the Rapine Mold Chart only identified on the box
Thank You
JohnBoy

Post Extras:

Huvius
.416 member

Reged: 04/11/07
Posts: 3556
Loc: Colorado

Re: Unknown Large Diameter Bullet Mold [Re: JohnBoy]
#344022 - 04/08/20 11:09 AM

12 bore slug

on page 3

https://vdocuments.site/rapine-bullet-mo...-moulds257.html

--------------------
He who lives in the past is doomed to enjoy it.

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 26994
Loc: Beautiful British Columbia, Ca...

Re: Unknown Large Diameter Bullet Mold [Re: Huvius]
#344023 - 04/08/20 12:14 PM

4th one. This mould's bullet would actually work very well in up to 100" of rifling twist, but also could work in more modern 34" to 36" rates of twist at 1,200fps to about 1,500fps.(just a guess) It would likely tumble badly in a smoothbore, even though the base is hollow.
If it was my mould and I wanted to shoot it in my 12 bore rifled bl. I would pull the handle off the hollow-base plunger and turn it slightly for a thicker base. That would increase the hoop stress level for the base and make it slightly heavier, up to 600gr.
By thicker base, I am referring to the 6th bullet in the lineup, below.
If the diameter of the tube was .730" and the bullet cast 730", then the base could be solid, likely weighing closer to 700gr. of more. PERFECT!

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

Pages: 1

Extra information

0 registered and 22 anonymous users are browsing this forum.

Moderator: DarylS

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2611

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact