Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Barrel lenghts

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Pages: 1

Rolland
.333 member

Reged: 31/12/06
Posts: 281
Loc: Camp Verde, AZ

Barrel lenghts
#341022 - 12/05/20 06:47 AM

I am getting ready to launch on my next ( and last) M95 Dutch Mannlicher build and have kicked around the idea of this one being a full lenght stock but......what is the average lenght of the full stocked rifles. I know they have different lenghts but I guess what balances best I am thinking 22 to 24 max??

If I stick with 6.5 X 53R I am going to have to buy a reamer, but thinking 7 X 57R Which should work in the clips. Anyway thinking out loud.

Edited by Rolland (12/05/20 08:19 AM)

Post Extras:

93x64mm
.416 member

Reged: 07/12/11
Posts: 4200
Loc: Nth QLD Australia

Re: Barrel lenghts [Re: Rolland]
#341064 - 13/05/20 06:28 AM

Try the 7x57R's in the clip & even if you remove the barrel to test feed first - just to see if it is possible to function.
Otherwise you might be going down a rabbit hole - hopefully Lancaster will chime in non this one, I'm sure he's worked on these before?
Sounds a good project though Roland!

Post Extras:

Malpais6
.224 member

Reged: 30/05/16
Posts: 8
Loc: yukon oklahoma usa

Re: Barrel lenghts [Re: Rolland]
#341065 - 13/05/20 07:05 AM

I'm in the same boat you are. I have a Dutch Hemburg action and a stock from the defunct Great America Gunstock Co.

I'm considering making mine in 6.5x57R or 303 Brit. Both rounds are easy to get. May also consider the 7x57R. I need to dig out a clip to see if the 6.5x57R fits.

At one time I considered the 444 Marlin.

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 26998
Loc: Beautiful British Columbia, Ca...

Re: Barrel lenghts [Re: Malpais6]
#341066 - 13/05/20 10:09 AM

With a .311 or .312" groove diameter, the .303 would be a cool choice.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

Pages: 1

Extra information

0 registered and 38 anonymous users are browsing this forum.

Moderator: CptCurl

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 1894

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact